• Title/Summary/Keyword: 염소화 탄화수소

Search Result 13, Processing Time 0.015 seconds

산업의학 - 직업성 피부질환 I

  • Korea Industrial Health Association
    • 월간산업보건
    • /
    • s.105
    • /
    • pp.16-25
    • /
    • 1997
  • 직업성 피부질환은 1988년 미국 전체 직업성 질환중 20%에 해당된다(미 노동부 자료 참고). 그 비율은 주에 따라 크게 달라지기도 한다. 피부질환은 어떤 주에서는 보상되는 직업성 질환의 대다수를 차지하기도 한다; 예를 들어, 캘리포니아와 플로리다주에서는 농작물에 의한 접촉성 피부염이 흔하다. 접촉성 피부염은 직업성 피부질환으로 보고되는 가장 흔한 피부질환이다. 이러한 사례의 4/5는 유기용제, 절삭유, 세척유, 알칼리, 산 등과 같은 자극성 화학물질에 대한 노출과 관련이 있다. 자외선은 어떤 화학물질(예를 들면, 코울 타르, 크레오소오트)과 반응하여, 이 화학물질 및 빛에 노출되는 부위에 자극성 접촉성 피부질환을 유발하기도 한다. 1/5의 사례는 에폭시 수지, 크롬, 식물 수지, 그 밖의 많은 것 등 특수 접촉 감광제와 관련될 수 있다. 강한 자극제에 노출되어 발상하는 화학적 화상은 비교적 흔하게 일어난다. 백반과 유사한 피부탈색은 드물게 일어나며 피부 접촉을 통하여 야기하는 특수 화학물질과 관련될 수 있다. 여드름과 모낭염은 기름 및 유지들과의 피부 접촉을 통하여 생겨날 수 있다. 10대 여드름과 구별되는 염소성 여드름이라고 불리는 질환은 여러 종류의 염화 탄화수소들(예를들면 다브롬화 디페닐, 다염화 디페닐, 디옥신)에 노출되어 발생되기도 한다. 신체적인 손상으로 반복되는 외상부위에 가골이 형성되기도 한다. 여러 종류의 일에 특징적인 것(예를 들면 바이올린 연주자의 목에 가골)이 소위 "직업적인 표지" 이다. 전기톱 작동 기술자, 분쇄기 작동기술자, 지하 광산 암석 천공 기술자에게서 발생하는, 손 - 팔 부위의 진동은 오랜기간 혹은 심하게 노출된 노동자에 있어서 - 손에 혈관수축질환 - 진동장애 백색 수지질환을 일으킬 수 있다. 피부암은 직업과 관련이 있다고 할 수 있다. 하지만 몇몇 사례가 산재 관련 기관에 보고외어 있지만, 암등록소에 보고는 불완전하며, 피부암으로 인한 사망은 드물기 때문에 피부암의 발생률은 알 수 없다. 예방적인 방법은 개인보호구(장갑, 구두 등), 기계공학적 통제, 노동자 교육, 피부에 노출되는 것을 피하기 위해 주어진 일을 맡는 노동자들의 교대와 같은 관리적인 통제가 있다. 이러한 방법들은 화학적 화상, 알러지성 접촉성 피부염과 같은 피부염, 진동장애, 직업관련성 질환(예를 들면, 건선, 단순태선, 백반)을 예방하는데 도움이 된다. 만성 자극성 접촉성 피부염은 아직 잘 이해하고 있지 못하여 현재 예방하는 방법은 아직 만족스럽지 못하다.

  • PDF

Application of ZVI/TiO2 towards Clean-up of the Contaminated Soil with Polychlorinated Biphenyls (ZVI/TIO2를 이용한 폴리염화비페닐로 오염된 토양 정화)

  • Jae Wook Park;Yun Jin Jo;Dong-Keun Lee
    • Clean Technology
    • /
    • v.29 no.2
    • /
    • pp.118-125
    • /
    • 2023
  • Once a site is contaminated with polychlorinated biphenyls (PCBs), serious environmental and human health risks are inevitable. Therefore, innovative but economical in situ remediation technologies must be immediately applied to the contaminated site. Recently, nanoscale zero-valent iron (nano-ZVI) particles have successfully been applied for the dechlorination of various chlorinated organic compounds like TCE, PCE and DDT, and they are considered to be environmentally safe due to the high abundance of iron in the earth's crust. Nano-ZVIs are much more reactive than granular ones, but tend to agglomerate due to their high surface energy and magnetic properties. In order to prevent them from being agglomerated toward larger particles, TiO2 was used as a support to immobilize the nano-ZVI particles as much as possible. 10wt% ZVI/TiO2 was prepared by adding NaBH4 slowly into an FeSO4/TiO2 aqueous slurry. In spite of their non-uniformity in size, the nano-ZVI particles were quite successfully dispersed onto the exterior surface of a non-porous TiO2 powder. The ZVI/TiO2 was then employed to degrade Aroclor 1242, a kind of PCBs standard, in spiked soil, and its reactivity towards the degradation of Aroclor 1242 was investigated. The fabricated ZVI/TiO2 degraded Aroclor 1242 in soil quite effectively, but the creation of remaining dechlorinated compounds, possibly high molecular weight hydrocarbons, in the soil was unavoidable.

Products and pollutants of half dried sewage sludge and waste plastic co-pyrolysis in a pilot-scale continuous reactor (반 건조 하수슬러지와 폐플라스틱 혼합물의 파일롯 규모 연속식 열분해에 의한 생산물과 발생 오염물질)

  • Kim, YongHwa;Chun, Seung-Kyu
    • Journal of the Korean Applied Science and Technology
    • /
    • v.34 no.2
    • /
    • pp.327-337
    • /
    • 2017
  • A continuous low temperature ($510^{\circ}C{\sim}530^{\circ}C$) pyrolysis experiment in a pilot-scale of 85.3 kg/hr was carried out by the mixed feedstock of half dried digested sewage sludge and waste plastics. As a result, the amount of pyrolysis gas generated was maximum 68.3% of input dry mass and scored $40.9MJ/Nm^3$ of lower heating value (LHV), and the percentage of air inflow caused by continuous pyrolysis was 19.6%. The oil was produced 4.2% of the input dry mass, and the LHV was 32.5 MJ/kg. The sulfur and chlorine contents, which could cause corrosion of the facility, were found to be 0.2% or more respectively. The carbide generated was 27.5% of the input dry mass which shows LHV of 10.2 MJ/kg, and did not fall under designated waste from the elution test. The concentration of carbon monoxide, sulfur oxides and hydrogen cyanide of emitted flu gas from pyrolysis gas combustion was especially high, and dioxin (PCDDs/DFs) was within the legal standards as $0.034ng-TEQ/Sm^3$. Among the 47 water pollutant contents of waste water generated from dry flue gas condensation, several contents such as total nitrogen, n-H extract and cyanide showed high concentration. Therefore, the merge treatment in the sewage treatment plants after pre-treatment could be considered.