• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.426-431
• /
• 2006

Acryl and vinyl sulfone functionalized blue and orange azo dyes were prepared by the coupling reaction of 6-bromo-2-cyano-4-nitroaniline and 2,5-dimethoxy-4-(vinylsulfonyl)benzenamine with 3-acrylamido-(N,N-diethylamino)benzene and 3-methyl-(N,N-diethylamino)benzene, respectively, for the coloring of poly(methyl methacrylate) (PMMA). Allyl functionalized dye was also prepared by reacting vinyl sulfone-containing dye with allylamine. Three types of dyeing method were used: the copolymerization of reactive dye with methyl methacrylate (MMA) and dyeing by polymerization of MMA in the presence of polymeric dye and dye 2 without reactive function. The color fastness for the three PMMAs were evaluated by comparing the solubility of dye under various conditions.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.3 no.1
• /
• pp.5-14
• /
• 2001

The study was about on the colorfastness of the natural vegetable dye. Impatient Balsamina was chosen as a speciesof the natural vegetable dye. It has a long history for Korean Women‘s grooming on the nail to be reddened, Actually those were very easy to gather and easy to extract the colors from the leaves and the flowers, Also Impatient Balsamina were abundant near our environment. So this was a cue as a natural dye for the wool fabric, This study was designed to testify the possibility of the Impatient Balsamina as a natural vegetable. First, 2 kinds of extracts from the Impatient Balsamina were prepared. Second, 2 kinds of mordants and 3 kinds of dyeing process were used. And the dyed wool fabric were evaluated the color index using Chroma Meter, the result was recorded as L$^*$, a$^*$, b$^*$ value(65.86, 16.40, 36.80). The effect of the mordants was more effective in Cr mordant than Al mordant in the color fastness and the color affinity. The very interesting results were in the colorfastness to the drycleaning, that was graded 4 to 5, but the colorfastness to light was low, graded 2. Impatient Balsamina was veryfied, it could be a natural vegetable dye for the wool fabric.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.10 no.2
• /
• pp.11-20
• /
• 1986

This study is to examine the colorfastness of leathers which has been tested for concentration of dyestuff and method of dyeing. This study Particularly attempts to solve some problems of colorfastness in wearing and treating leather goods. The finding of this study can summarized as follows: 1. In dyeing garment leathers classified by concentration, the colorfastness to light improves as concentration increases. 2. As the result the more concentration increases, the more the colorfastness to rubbing declines. 3. In colorfastness to dry cleaning, the grade of color fading has been to be high but that of staining to be bad as concentration increases. 4. In assessing change in colorfastness, grades to light and rubbing after coating have been found to be better than that before coating. 5. In colorfastness to dry cleaning after coating, both grades of color fading and staining have been found to be bad.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.3
• /
• pp.63-71
• /
• 2022

This paper aims to compare and verify the antibacterial effects of cotton fabrics naturally dyed with extracts of Ulmus davidiana var. japonica Nakai, Caesalpinia sappan, Saururus chinensis, and Artemisia princeps against antibiotic-resistant strains of bacteria. After natural dyeing of the test fabric, Al, Cu, Fe mordants were used. The color fastness against washing, rubbing, and perspiration of the cotton fabrics dyed with the 4 types of extracts were mostly excellent. However, the color fastness against light showed poor results for all four types. As for the antibacterial test method, MRSA (ATCC 33591) was applied to the cotton fabrics dyed with the four kinds of extracts and cultured for 24 hours. After that, the bacteria that proliferated on the fabrics were collected and spread on a solid medium. The bacteria were measured to find out the bacteriostatic reduction rate for the antibiotic-resistant strains. As a result of the analysis, all four extracts showed a high bacteriostatic reduction rate of more than 99% when the copper mordant was used. Even with the lack of a mordant, the bacteriostatic reduction rate was high, at 99.9% for Caesalpinia sappan and 94.6% for Saururus chinensis.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.2
• /
• pp.163-177
• /
• 2019

This study aims to review the relations between the dyeing conditions (i.e., dye concentration, addition amounts of salt and alkali, and dyeing temperature) and dyeing properties and color fastness to light for identifying the optimal dyeing conditions when dyed regenerated woody fibers were obtained through the defibration of waste medium density fiberboard (MDF) using reactive Red H-E3B (Bis-monochlorotriazine (MCT)/MCT type) and reactive Red RB133% (Bis-MCT/Vinyl sulphone type). The dyeing yield (K/S) obtained using two types of reactive dyes increased as the dye concentration increased by 1-10% (on the weight of fiber (OWF)). In addition, the K/S of H-E3B was higher than that of RB133% irrespective of the dye concentration. The color difference of H-E3B after ultraviolet (UV) radiation was lower than that of RB133%, denoting good resistance to discoloration by UV. As the amount of sodium sulfate increased, the color difference and K/S also increased, and the adequate salt content was determined to be 50-70 g/L. Further, the color difference and K/S significantly increased only the addition of 2 g/L of sodium carbonate; however, almost no difference was observed when more than 2 g/L of sodium carbonate was added. The addition amount of sodium carbonate was adequate 5-10 g/L to dyeing the fiber and the pH at this addition level was 10. The dyeing yield of H-E3B increased when the dyeing temperature increased; however, it subsequently decreased after the dyeing temperature became $80^{\circ}C$. The dyeing yield of RB133% was almost the same up to $60-70^{\circ}C$ but declined subsequently. Thus, the adequate temperatures were $80^{\circ}C$ and $60^{\circ}C$ for H-E3B and RB133%, respectively. If the waste MDF woody fiber was dyed under the aforementioned optimal conditions, dyed regenerated woody fiber can be obtained having the following colors: 1.5 to 2.0R with the H-E3B dye and 9.6 to 10.0 PR with RB133%.

• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.1004-1012
• /
• 2015

The purpose of this study is to investigate the loess dyeability of soybean fabric using loess as colorants. Recent days, various textile products such as inner wears, sheets and interior goods are manufactured using materials dyed with loess emphasizing its improved metabolism, anti-bacterial, deodorizing properties, and far infrared ray emissions. Soybean fabric was dyed with loess solution according to concentration of loess, dyeing temperature and dyeing time. To improve washing fastness, soybean fabric and dyed soybean fabric with loess were mordanted by mordanting agents such as sodium chloride(NaCl), Acetic acid(CH₃COOH) and Aluminium Potassium Sulfate(AlK(SO₄)₂·12H₂O). Dyeability and color characteristics of dyed soybean fabric were obtained by CCM observation. Particle size distribution of loess, the dyeability(K/S) of soybean fabric, morphology and washing durability of loess dyed soybean fabric were investigated. The results obtained were as follows; Mean average diameter of loess was 1.08µm. The main components of loess used in this study were silicon dioxide(SiO₂), aluminium oxide(Al₂O₃), and iron oxide(Fe₂O₃). The content of these three component was above 75 weight %. The dyeability of soybean fabric was increased gradually with increasing concentration of loess. The optimum dyeing temperature and dyeing time were 90℃ and 60minutes expectively. The fastness to washing according to concentration of loess and mordanting method indicated good grade result as more than 4 degree in all conditions.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.41-41
• /
• 2000

부유부상 공정은 현재 신문고지와 사무용 고지의 탈묵을 통한 신문용지 및 화장지 제조 에 널리 사용되고 있는 고지재활용을 위한 핵심공정이다. 하지만 이들 공정은 갈수록 열악 해지는 국내 고지원료의 품질변화에 따라서 잉크 및 토너의 분리효율이 저하되고 있어 생산 되는 탈묵 펄프의 품질저하, 리젝트 발생량의 증대, 폐수 처리공정의 부하 증가 등 다양한 문제점을 발생시키고 있어 이에 대한 대책의 수립이 시급히 요청되고 있다. 현재와 같이 다양한 형태의 잉크 및 인쇄방식으로 인쇄된 많은 종류의 재활용지가 원료 로 투입되고 있는 경우 탈묵공정의 효율 향상을 위해서는 부유부상 공정에 대한 좀 더 체계 적이고 논리적인 접근이 필요하다. 이러한 문제점을 극복하기 위해 먼저 고지 재활용 공정 의 핵심 단위공정인 부유부상 공정에 관련된 복잡한 문제점을 단순화하여 고상 및 액상의 표면화학적 특성을 평가하고, 이에 따른 부유부상 공정의 효율을 분석하였다. 본 연구에서는 부유부상 공정을 기초과학적 측면에서 구명하기 위해 마이크로 크리스탈린 셀룰로오스(Microcrystalline cellulose: MCC)를 모델 물질로 사용하였고, 친수성 의 표면 특 성을 나타내는 MCC의 표면 특성을 바꾸기 위하여 AKD(alkyl ketene dimer)로 처리비율을 달리하여 사이징 처리하였다. 부유부상 실험에 사용된 MCC는 친수성을 띠는 것과 소수성 을 부여한 것을 구별하고 그 비율을 백색도를 통해 측정하기 위하여 자체적으로 친수성을 가지는 MCC는 세척 견뢰도가 높은 검은색 염료로 염색하였다. 준비된 친수성과 소수성 M MCC의 혼합비율 별로 패드를 작성하여 백색도를 측정함으로써 검량선을 작성하였다. 또한 부유부상 시간에 따른 제거효율을 알아보기 위하여 부유부상 시간별로 각각의 리젝트율과 수율올 측정하고, 리젝트 시료로부터 패드를 제조하여 백색도를 측정하였다. 실험 결과 소수성 MCC의 소수화 정도에 따라서 리젝트율이 증가하였으며, 이를 통해 표 면에 소수성을 띠는 입자는 소수성이 강할수록 부유부상공정에서 제거율이 증가한다는 것을 확인하였다. 부유부상 처리한 MCC로 패드를 제조한 뒤 백색도를 비교한 결과에서도 이를 확인하였다. 한편 리젝트로 함께 제거된 MCC 내에 존재하는 친수성 MCC의 양은 극히 미 세하였다. 또한 부유부상를 실시하는 초기에 상당량의 리젝트가 발생함을 확인하였는데, 이 는 전체 부유부상을 통해 제거되는 양의 45-68%였다. 한편 부유부상이 진행됨에 따라서 리젝트 양의 증가폭이 둔화되는 경향을 나타내었다. 이러한 경향은 MCC의 소수성이 강할 수록 더욱 뚜렷하게 나타났다. 이를 통해 계 내로부터 소수성인 물질이 급속하게 제거됨을 알 수 있었으며 필요 이상의 부유부상 처리는 잉크제거 효율을 높일 수는 있으나 소모되는 시간에 비하여 비효과적임을 알 수 있었다.