• The Korean Journal of Pesticide Science
• /
• v.16 no.1
• /
• pp.11-20
• /
• 2012

As increasing the use of pesticides both in number and amount to boost crop production, consumer concerns over food quality and safety with respect to residual pesticides are also continuously increasing. However, there is still lacking of information that can effectively help to remove residual pesticides in foods. In recent years, contaminant removal by gas (or) glow discharge plasma (GDP) attracts great interests on environmental scientists because of its high removal efficiency and environmental compatibility. It was shown to be effective for the removal of some organophosphorus pesticides, phenols, benzoic acid, dyes, and nitrobenzene on solid substrate or in aqueous solution. This work mainly focuses on the removal of wide range of residual pesticides from fresh fruits and vegetables. As for preliminary study, the experiments were carried out to investigate whether GDP can be used as an effective tool for degrading target pesticides or not. With this objective, 60 selected pesticides drop wised onto glass slides were exposed to two types of GDP, dielectric barrier discharge plasma (DBDP) and low pressure discharge plasma (LPDP), for 5 min. Then, they were washed with 2 mL MeCN which were collected and used for determination of remaining concentration of pesticides using LC-MS/MS. Among selected pesticides, degradation of 18 pesticides (endosulfan-total was counted as one pesticide) by GDP could not be examined because control treatments, which were left in ambient environment, of those pesticides recovered less than 70% or even did not recover. However, majority of tested pesticides (42) were degraded by both types of GDP with satisfactory recovery (>80%) of control sample. Pesticides degradation ranged from 66.88% to 100% were achieved by both types of plasma except clothianidin which degradation in LPDP was 26.9%. The results clearly indicate that both types of gas discharge plasma are promising tools for degrading wide range of pesticides on glass substrate.

• Korean Journal of Environment and Ecology
• /
• v.24 no.4
• /
• pp.406-425
• /
• 2010

The flora for resource plants in Hapcheon-gun were investigated 10 times from March to October, 2009. Based on collected voucher specimens, the flora of this area consisted of 489 taxa in total; 82 families, 292 genera, 427 species, 4 subspecies, 49 varieties and 9 forms. The resources plants in the area were categorized by usage into 9 groups including an unknown group: 187 edible, 126 pasturing, 137 medicinal, 112 dyeing, 52 ornamental, 16 timber, 9 fiber, 2 industrial taxa and 134 unknown resource plants were recorded respectively. In addition, there were 18 taxa of Korean endemic plants, 33 taxa of specific plants which were designated by the Ministry of Environment, and 2 taxa of rare plants. Furthermore, 44 taxa of naturalized plants were observed in this investigated area. The vegetation status of the investigated area was well conserved, but it is likely that the contaminated area could be rapidly increased and exacerbated by the climbers and development of forest roads. Therefore, the systems for conservation need to be prepared for the effective management of forests, and there must be special rules to control the number of climbers and visitors.

• Conservation Science in Museum
• /
• v.15
• /
• pp.96-121
• /
• 2014

Portrait of Sim Huisu is a seventeenth-century Joseon portrait of a meritorious vassal. The National Museum of Korea currently owns two portraits of Sim Huisu, which are the eldest son's family and by the eldest grandson of the family's second eldest son. Both were donated in 1980. Portraits were still in its original mounting, but the supporting silk had been damaged and stained in a flood. Conservation treatment was undertaken to restore the original style, and scientific analysis, such as, X-ray, XRD, XRF and Graff "C" stain, was conducted to study the materials and painting techniques. The support silk was found to be refined fibroin and a plain weave consisting of two weft threads and one warp thread. The lining papers were found to be bamboo fiber paper of first layer in China and Korean traditional mulberry paper in second. Various pigments were identified in the painting, including white lead, cinnabar, atacamite, ink stick, azurite, silver, and gold. The study also confirmed the use of the back painting, with colors such as white ^{White Lead}, green ^Atacamite, orange ^Minium, black ^{Ink Stick}, and yellow ^Dye. Also, it was found that stick ink or dye was used with white lead.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.9
• /
• pp.765-774
• /
• 2009

Fiber Dyeing and Finishing facility has been recognized as an important pollution source due to its consumption of large volumes of water and chemicals. Unit mass discharge for the conventional water quality parameters such as flowrate, SS, $BOD_5,\;COD_{Mn},\;COD_{Cr}$, TN, TP were estimated. To represent the respective industries, three companies were carefully selected based on its manufacturing goods, flowrate and location at various unit operations and processes. More than 90% of decrease in unit mass estimation between influent and effluent of BOD was observed. But the values themselves were similar to those of Fiber Manufacturing facility due to the high loadings of organic matter. Biodegradability of influent was almost three times higher than that of effluent. Unit mass discharge estimations of unit process (estimated in this study) based on space, products and raw material were similar to those of composite process (estimated by National Institute of Environmental Research), while big difference was observed in the other factors. Unit mass discharge factors calculated in this study can be used as the reference for the estimation of water pollution loading costs in Nakdong river basin. For the effective water pollution control and management, it is essential to characterize the various types of water quality parameters from the effluents of individual industrial wastewater treatment plants.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.5 s.164
• /
• pp.659-669
• /
• 2007

The purpose of this study was to investigate the degradation of silk fabrics dyed with gardenia and sappanwood by Ultraviolet Light(UV). To asses the effect of uv on dyed silk fabrics, physical and chemical properties of samples were explored. K/S value rapidly decreased with increasing exposure time. Mordanting improved ultraviolet-cut ability and the sappanwood dyed samples were superior to those of gardenia dyed in ultraviolet-cut ability. Color progressively faded away as uv exposure time increased, accordingly, $L^*,\;a^*,\;b^*$, H/VC, ${\Delta}E$ were changed. Morphological change observed with SEM represented degradation of silk fabrics from the outer fibril to the inner fibril. Tensile Strength abruptly decreased as uv exposure time increased and the mordanted samples showed higher tensile strength than the unmordanted. FT-IR analysis confirmed that main peaks at 3297 and $1704cm^{-1}$ band for silk fabric were due to N-H and C=O stretching, gardenia peaks at 1654 and $668cm^{-1}$ band representing C=O(ester), C=C(alken) and O-C=O(carboxylic acids) of crocin and sappanwood peaks at $1715cm^{-1}$ band representing C=O(cyclic keton) of brazilin appeared on the samples exposed for 14 days, but these peaks indicating colorants after 28 days of uv exposure faded away due to prolonged exposure of uv.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1011-1015
• /
• 2005

본 실험에서는 부력 조건이 달라질 때 단공방류구에서 정체수역으로 수평방류되는 부력제트의 거동을 규명하였다. LIF (Laser Induced Fluorescence) 시스템을 이용하여 수행하였는데, LIF 시스템은 고해상도의 이미지를 취득할 수 있어 데이터의 정확도가 높으며, 동시에 한 평면상의 농도장을 일시에 측정할 수 있는 장점이 있는 기술이다. LIF 시스템은 크게 세부분으로 구성되어 있는데 방출시스템, 포착시스템, 처리시스템이 그것이다. 실험 조건을 고려해서 온수를 이용하여 주변수와의 밀도차를 재현하였으며, LIF 시스템의 추적입자로 형광염료 Rhodamine B를 사용하였다. 또한, 실험 데이터 취득과정에서 필요한 검정과정을 수행하였는데, LIF 시스템에서 검정과정은 레이저 입사광의 강도가 불균등한 분포를 가지는 점과 주변수의 매질에 의한 근의 감쇠가 발생하는 문제를 해결하기 위한 것이다. LIF 시스템은 부력제트의 농도장을 매우 정밀하게 측정할 수 있는데, 방류밀도 Froude 수가 변함에 따라 측정된 순간이미지를 통해 제트의 진화과정을 상세하고 가시적으로 확인할 수 있었다. 검정과정을 거친 농도 종단면에서 중심선의 연장선이 LIF 시스템에 의해 측정된 순간이미지의 중심선 궤적과 거의 일치하는 것도 알 수 있었다. 또한 LIF 시스템을 통해서 취득된 단일수평부력제트의 궤적과 중심선 희석률을 기존의 상용모형인 VISJET과 CORMIX1에 의해 예측된 결과와 비교$\cdot$분석한 결과, 제트 중심선 궤적의 경우, LIF 시스템을 이용한 측정값은 대체로 VISJET 모형의 결과와 일치하는 것으로 밝혀졌다. 중심선 희석률의 경우, LIF 측정값은 대체로 CORMIX1 모형, Cederwall(1968)의 경험식과 일치하는 경향을 보였다.0\%$일 때가 밸브를 $60\%$와 $80\%$ 개폐시켰을 때보다 $0.3kg/cm^2,\;0.29kg/cm^2$ 낮게 나타나 밸브를 전체 개방 했을 때 관로내의 수압이 상수설계기준에 적합한 수압을 유지함을 알 수 있다. 상수관로 설계 기준에서는 관로내 수압을 $1.5\~4.0kg/cm^2$으로 나타내고 있는데 $6kg/cm^2$보다 과수압을 나타내는 경우가 $100\%$로 밸브를 개방하였을 때보다 $60\%,\;80\%$ 개방하였을 때가 더 빈번히 발생하고 있으므로 대상지역의 밸브 개폐는 $100\%$ 개방하는 것이 선계기준에 적합한 것으로 나타났다. 밸브 개폐에 따른 수압 변화를 모의한 결과 밸브 개폐도를 적절히 유지하여 필요수량의 확보 및 누수방지대책에 활용할 수 있을 것으로 판단된다.8R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주었다.특히

• Korean Journal of Plant Resources
• /
• v.23 no.5
• /
• pp.465-479
• /
• 2010

This study was carried out to classify the regional folk plants in the inland of Gyeongsangbuk-do. According to the survey results from 582 survey sheets of 126 residents at 85 places of 17 counties and cities from March to October, 2009, the folk plants in the inland of Gyeongsangbuk-do consisted of a total 254 taxa; 76 families, 207 genera, 225 species, 2 subspecies, 26 varieties, and 1 form. The use by its usage was: 216 taxa; edible, 82 taxa; medicinal, 30 taxa; dye, 3 taxa; aroma, 4 taxa; spice, 4 taxa; ornamental, 1 taxa; fiber, 2 taxa; oil, 1 taxa; starch, 5 taxa; fuel, 9 taxa; others, respectively, so the edible use is the highest. The most useful part was the leaf, followed by stem and root. The folk plants of 3 head families from Yeongyang and Cheongsong were 42 taxa. The consistency comparison between the scientific name and the local name were the highest in the 50's and the lowest in 80's.

• Korean Journal of Plant Resources
• /
• v.26 no.1
• /
• pp.90-102
• /
• 2013

This study was carried out in order to catalogue the folk plants of 5 counties and cities of Chungcheongbuk-do Province from March to October, 2011. 429 pages of field notes relating to the folk plants were collected from approximately 92 local inhabitants and analyzed subsequently. The identified folk plants were of 173 taxa, composed of 150 species, 1 subspecies, 22 varieties and 129 genera under 56 families. Naturalized plants were included. The use by its usage was: 349 taxa; edible, 68 taxa; medicinal, 2 taxa; dye, 1 taxa; aroma, 4 taxa; spice, 1, taxa; ornamental, 3 taxa; oil, 1 taxa; starch, 18 taxa; others respectively, so the edible use is the highest. The most useful part was the leaf, followed by stem, and whole plant. The consistency comparison between the scientific name and the local name were the highest in the 50's and the lowest in 90's.

• Journal of the Korean Chemical Society
• /
• v.38 no.5
• /
• pp.351-358
• /
• 1994

The spectrophotometric determination of trace selenium(Ⅳ) using its catalytic reaction has been studied in aqueous solutions. The catalytic reaction of phenylhydrazine hydrochloride with selenium(Ⅳ) in an acidic aqueous medium produces benzenediazonium ion which will be converted into a red-coloured azo dye by coupling with H-acid(8-amino-1-naphtol-3,6-disulfonic acid disodium salt). For the reaction, the experimental conditions such as amounts of the reagents and pH of the sample solutions were optimized. After 15 ml of the sample solution was treated with 1 ml of 0.1 M EDTA solution to mask $Fe^{3+}$, etc., 1 ml of 0.06 M phenylhydrazine hydrochloride, 1 ml of 0.02 M H-acid, and 3 ml of 0.3 M-$KClO_3$ were added into the solution, sequentially. The solution was adjusted to pH 1.4 with HCl. After it was heated in a steam bath for 30 minutes, the solution was cooled down to a room temperature and then diluted to 25 ml with deionized distilled water. A blank solution for the absorbance measurement was prepared from the deionized water. The absorbance was measured at 527 nm. Using the above procedure, the trace amount of selenium was determined in natural waters such as tap, river and pond waters by a standard curve method and recoveries of Se spiked to samples were also obtained. From the recoveries of 104 to 111%, it could be concluded that this method was applicable to the quantitative determination of ng/ml level of selenium in natural waters.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.41-41
• /
• 2000

부유부상 공정은 현재 신문고지와 사무용 고지의 탈묵을 통한 신문용지 및 화장지 제조 에 널리 사용되고 있는 고지재활용을 위한 핵심공정이다. 하지만 이들 공정은 갈수록 열악 해지는 국내 고지원료의 품질변화에 따라서 잉크 및 토너의 분리효율이 저하되고 있어 생산 되는 탈묵 펄프의 품질저하, 리젝트 발생량의 증대, 폐수 처리공정의 부하 증가 등 다양한 문제점을 발생시키고 있어 이에 대한 대책의 수립이 시급히 요청되고 있다. 현재와 같이 다양한 형태의 잉크 및 인쇄방식으로 인쇄된 많은 종류의 재활용지가 원료 로 투입되고 있는 경우 탈묵공정의 효율 향상을 위해서는 부유부상 공정에 대한 좀 더 체계 적이고 논리적인 접근이 필요하다. 이러한 문제점을 극복하기 위해 먼저 고지 재활용 공정 의 핵심 단위공정인 부유부상 공정에 관련된 복잡한 문제점을 단순화하여 고상 및 액상의 표면화학적 특성을 평가하고, 이에 따른 부유부상 공정의 효율을 분석하였다. 본 연구에서는 부유부상 공정을 기초과학적 측면에서 구명하기 위해 마이크로 크리스탈린 셀룰로오스(Microcrystalline cellulose: MCC)를 모델 물질로 사용하였고, 친수성 의 표면 특 성을 나타내는 MCC의 표면 특성을 바꾸기 위하여 AKD(alkyl ketene dimer)로 처리비율을 달리하여 사이징 처리하였다. 부유부상 실험에 사용된 MCC는 친수성을 띠는 것과 소수성 을 부여한 것을 구별하고 그 비율을 백색도를 통해 측정하기 위하여 자체적으로 친수성을 가지는 MCC는 세척 견뢰도가 높은 검은색 염료로 염색하였다. 준비된 친수성과 소수성 M MCC의 혼합비율 별로 패드를 작성하여 백색도를 측정함으로써 검량선을 작성하였다. 또한 부유부상 시간에 따른 제거효율을 알아보기 위하여 부유부상 시간별로 각각의 리젝트율과 수율올 측정하고, 리젝트 시료로부터 패드를 제조하여 백색도를 측정하였다. 실험 결과 소수성 MCC의 소수화 정도에 따라서 리젝트율이 증가하였으며, 이를 통해 표 면에 소수성을 띠는 입자는 소수성이 강할수록 부유부상공정에서 제거율이 증가한다는 것을 확인하였다. 부유부상 처리한 MCC로 패드를 제조한 뒤 백색도를 비교한 결과에서도 이를 확인하였다. 한편 리젝트로 함께 제거된 MCC 내에 존재하는 친수성 MCC의 양은 극히 미 세하였다. 또한 부유부상를 실시하는 초기에 상당량의 리젝트가 발생함을 확인하였는데, 이 는 전체 부유부상을 통해 제거되는 양의 45-68%였다. 한편 부유부상이 진행됨에 따라서 리젝트 양의 증가폭이 둔화되는 경향을 나타내었다. 이러한 경향은 MCC의 소수성이 강할 수록 더욱 뚜렷하게 나타났다. 이를 통해 계 내로부터 소수성인 물질이 급속하게 제거됨을 알 수 있었으며 필요 이상의 부유부상 처리는 잉크제거 효율을 높일 수는 있으나 소모되는 시간에 비하여 비효과적임을 알 수 있었다.