• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1016-1021
• /
• 2011

The enhancement for cooling performance of heat sink is surely necessary to guarantee the performance of electronic products. So in this paper, the cooling performances of the aluminum heat sink with pulsating heat pipe(PHP) were investigated experimentally and numerically. The pulsating heat pipe was used as a heat spreader. Working fluid of PHP was R-22. Heat inputs were 30W, 60W, 80W and 100W, respectively. Heat sink was tested for forced convection conditions with air velocity of 1 ~ 4m/s. And CFD simulations were conducted for two different heat sinks. The results showed that the cooling performance of heat sink with pulsating heat pipe was higher than that of conventional heat sink. Therefore, the pulsating heat pipe can be a good tool to improve cooling performance of heat sink.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.10
• /
• pp.779-786
• /
• 2015

The objective of this study is to propose a new channel shape that improves thermal-hydraulic performance. The existing Zigzag channel has high pressure loss due to flow separation and reverse flow. To improve this disadvantage, partial straight channel is inserted into bended points. Also, the effects of straight channel's length change on heat transfer and pressure loss are analyzed. Thermal-hydraulic performance of the new shape and existing Zigzag channel are quantitatively compared in terms of Goodness Factor. Mass flow rate was changed from $1.41{\times}10^{-4}$ to $2.48{\times}10^{-4}kg/s$. The average volume goodness factor of 1mm straight channel shape was increased by 25% compared to the Zigzag channel.

• Fire Science and Engineering
• /
• v.17 no.1
• /
• pp.33-39
• /
• 2003

The purpose of this study is to evaluate flame retardant performance, thermal stability and toxicity of combustion gases for some commercial wallpapers. ID evaluate flame retardant performance 45 degree combustion experiment method was used and thermal stability was evaluated using DSC and TGA apparatus (OSC-50/Shimadzu, TGA2050/TA Instruments Inc) . Concentrations of CO, $CO_2$, HCN and HCI were measured with (GASTEC/Japan, MSA400 Gas Monitor/Infitron Inc) and toxicity indices using NIST N-Gas Model were applied to evaluate the toxicity of combustion gases. The evaluation produced the following results : First, paper cork and PVC wallpaper treated with flame retardants were found to be suitable for flame retardant performance standards. Second, paper, cork and PVC wallpaper non-treated with flame retardants were shown to be relatively more hazardous because they had greater calorific values and a faster decomposition time than the flame retardant treated wallpapers. Third, the toxicity indices of non-treated wallpapers were found to be higher than those of treated wallpapers, and the toxicity index of PVC wallpapers was higher than those of paper and cork wallpapers.

• Smart Media Journal
• /
• v.13 no.6
• /
• pp.24-34
• /
• 2024

If the future can be predicted from network traffic data, which is a time series, it can achieve effects such as efficient resource allocation, prevention of malicious attacks, and energy saving. Many models based on statistical and deep learning techniques have been proposed, and most of these studies have focused on improving model structures and learning algorithms. Another approach to improving the prediction performance of the model is to obtain a good-quality data. With the aim of obtaining a good-quality data, this paper applies a dense sampling technique that augments time series data to the application of network traffic prediction and analyzes the performance improvement. As a dataset, UNSW-NB15, which is widely used for network traffic analysis, is used. Performance is analyzed using RMSE, MAE, and MAPE. To increase the objectivity of performance measurement, experiment is performed independently 10 times and the performance of existing sparse sampling and dense sampling is compared as a box plot. As a result of comparing the performance by changing the window size and the horizon factor, dense sampling consistently showed a better performance.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.299-304
• /
• 1999

시, 공간적으로 변하는 해양환경에서 선배열 소나의 성능예측 정보를 추출하기 위해서는 정밀 해양 DB (Data Base)와 함께 현장에서 실시간으로 측정한 해양자료의 연동이 필수적이다. 이러한 실시간 정보와 DB 정보를 융합하여 얻을 수 있는 정보들로는 전술적 운용상황, 근거리 환경소음 분포, 전파손실/탐지확률 분포, 그리고 음파의 전파 경로 등이 있다. 소나 운용자는 이들 정보로부터 최종적으로 전술상황을 판단함과 동시에 소나의 최적 운용 수심 및 방향을 권고할 수 있다. 국과연에서는 이러한 정보를 획득하기 위하여 음탐환경분석 S/W를 개발하였으며, 수차례의 해상시험을 통하여 그 성능을 검증하였다. 본 논문에서는 실시간 해양정보와 DB정보의 융합을 통하여 선배열 소나의 핵심 성능예측 기법인 전파손실/탐지확률 계산과 근거리 환경소음 계산을 수행하는 알고리즘을 제시한다. 아울러 S/W로 구현된 이들 기법들의 해상시험 결과도 제시하고자 한다.

• Journal of Energy Engineering
• /
• v.14 no.3 s.43
• /
• pp.194-202
• /
• 2005

The present study was analytically and experimentally carried out to predict the absorption characteristics on combined heat and mass transfer process in a vertical falling film of variable absorbers. Heat and mass transfer enhancements were analytically investigated. Effects of geometric parameters by insert device (spring) and corrugate, flow pattern on absorption performances has been also investigated. Especially, the optimal values of absorber geometry (ID=22.8mm, L=1150m) and kinetic variables (solution flow rate, flow pattern) for maximum absorption performance has been predicted by the numerical analysis. The maximum absorption performance in a numerical analysis and experiment was shown at the wavy-flow by insert device (spring).

• Journal of Korean Society of Steel Construction
• /
• v.27 no.4
• /
• pp.387-397
• /
• 2015

The domestic fire resistance performance test is conducted as a prescriptive design method such as quality test. In quality test there are 2 methods, unloaded fire resistance test and fire resistance test under load. In realistic, these tests, however, have problems with expense, time and diversity of structure. This study reviewed fire resistance performance of H-beam flexural member by thermal stress analysis using finite element ABAQUS program. This research is for the performance-based design reviewing applicability of domestic standard. As a result of this study, limit temperatures per each load ratio provied for proper performance of fire resistancy.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.11a
• /
• pp.290-297
• /
• 2003

A time-series database is a set of data sequences, each of which is a list of changing values corresponding to an object. Subsequence matching under time warping is defined as an operation that finds such subsequences whose time warping distance to a given query sequence are below a tolerance from a time-series database. In this paper, we first point out the characteristics of the previous methods for time-series sequence matching under time warping, and then discuss the approaches for applying them to whole matching as well as subsequence matching. Also, we perform quantitative performance evaluation via a series of experiments with real-life data. There have not been such researches in the literature that compare the performances of all the previous methods of subsequence matching under time warping. Thus, our results would be used as a good reference for showing their relative performances.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.586-588
• /
• 2000

본 논문은 전자 패키징의 방열 성능을 개선하기 위하여 초소형 히트 파이프를 제작하고 열전달 성능을 시험한 결과를 보여준다. IC 칩이 점점 고성능화되고 고집적화되어 감에 따라 발열 문제가 대두되는데, 이 열은 전도만으로는 충분히 소산시킬 수 없고 패키징 표면에 별도의 장치를 장착하는 것은 시스템 소형화의 장애 요소가 된다. 따라서, 고성능 칩 개발을 위한 선결 과제로 고성능 초소형 냉각 장치가 요구되고 있다. 히트파이프는 밀봉된 파이프 내의 2상 유동과 상변화 잠열을 이용하여 열원으로부터 히트 싱크로 열을 효과적으로 전달하는 열교환 장치이다. 본 논문에서는 전자 패키징 내에 집적화할 수 있도록 초소형 히트 파이프 어레이를 제작하여 그 성능을 시험한 결과 증발부의 온도가 $12.1^{\circ}C$ 감소됨을 보인다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.193-195
• /
• 2005

서브시퀀스 매칭은 주어진 질의 시퀀스와 변화의 추세가 유사한 서브시퀀스들을 시계열 데이터베이스로부터 검색하는 연산이다. 본 논문에서는 크기 효과로 인한 서브시퀀스 매칭의 심각한 성능 저하 현상을 정량적으로 관찰하여, 하나의 윈도우 크기를 대상으로 만든 단 하나의 인덱스만을 이용하는 것은 실제 응용에서 만족할만한 성능을 제공할 수 없다는 것을 규명하였다. 또한, 이러한 문제로 인해 다양한 윈도우 크기를 기반으로 다수의 인덱스들을 구성하여 서브시퀀스 매칭을 수행하는 인덱스 보간법의 응용이 필요함을 보였다. 인덱스 보간법을 응용하여 서비시퀀스 매칭을 수행하기 위해서는 먼저 다수의 인덱스들을 위한 윈도우 크기들을 결정해야 한다. 본 연구에서는 물리적 데이터베이스 설계방식을 이용하여 이러한 최적의 다수의 윈도우 크기들을 선정하는 문제를 해결하였다. 이를 위하여 시계열 데이터베이스에서 수행될 예정인 질의 시퀀스들의 집합과 인덱스 구성의 기반이 되는 윈도우들의 크기의 집합이 주어질 때, 전체 서브시퀀스 매칭들을 수행하는 데에 소요되는 비용을 예측할 수 있는 공식을 산출하였다. 또한, 이 비용 공식을 이용하여 전체 서브시퀀스 매칭들의 성능을 극대화 할 수 있는 최적의 윈도우 크기들을 결정하는 알고리즘을 제안하였으며, 이 알고리즘의 최적성과 효율성을 이론적으로 규명하였다. 끝으로, 실험에 의한 성능 평가를 제안된 기법의 우수성을 제시하였다.