• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.57-62
• /
• 2004

We report the fiber-optic current sensors composed of a side-polished single-mode fiber with the thermo-optic Polymer layer and the metal wire as a heater. The index change of polymer layers caused by the resistant heat of the metal wires induces the optical attenuation through the evanescent field of the side-polished single-mode fiber. Two types of the sensors are proposed and their characteristics as a current sensor are investigated.

• Composites Research
• /
• v.27 no.3
• /
• pp.90-95
• /
• 2014

Cure shrinkage during cure process of polymer matrix composites develope residual stress that cause some structural deformation, such as spring-in, spring-out and warpage. The carbon/epoxy prepreg used in this study is Hexply M21EV/34%/UD268NFS/IMA-12K supplied by Hexcel corp. Cure shrinkage and degree of cure measured by TMA(thermomechanical analyzer) and DSC(differential scanning calorimetry). Cure shrinkages are measured by TMA within a temperature range of $140{\sim}240^{\circ}C$ in a nitrogen atmosphere, and degree of cure determined by the heat of reaction using dynamic and isothermal DSC runs in argon atmosphere. As a result, the cure shrinkage is increased dramatically in a degree of cure range between 27~80%. the higher the cure temperature, the lower the degree of cure occurring to begin cure shrinkage.

• Nuclear industry
• /
• v.20 no.6 s.208
• /
• pp.31-44
• /
• 2000

본 연구에서 액체금속로의 노심용융(core meltdown)으로 인한 초 즉발 임계(super-prompt critical)의 출력 폭주 사고시, 노심의 반응도 및 열수력 특성 변화와 에너지 방출량등을 계산하기 위하여, Bethe-Tait 방버론을 수정, 보완한 분석 모델이 개발되었다. 주요 보완 내용으로서는, 금속 연료 노심의 단상 액체 영역에서의 선형의(Linear) threshold 형태의 상태 방정식뿐만 아니라 포화 증기(saturated fuel vapor) 영역에서의 상태 방정식이 개발되었고, 이에 따른 노심 붕괴 반응도(disassembly reactivity)의 분석 모델이 개발되었다. 또한 도플러 반응도 효과를 고려하기 위한 분석모델도 아울러 개발되었다. 상기 보완 모델을 실행할 수 있는 수치 해석 프로그램이 개발되었고, 이를 활용하여 KALIMER에서 HCDA가 발생하였을 경우 노심에서의 에너지 방출량 계산이 수행되었다. 분석결과 도플러 효과와 포화 증기 영역에서의 압력 증가 및 노심팽창의 중요성이 확인되었다. 도플러 효과가 고려되지 않을 경우 HCDA는 분석된 모든 반응도 삽입률에 대하여 폭발적인 에너지 방출과 함께 사고가 종결되는 것으로 평가되었다. 그러나 도플러 상수가 최적 평가치인 -0.002인 경우 50$/s이하의 반응도 삽입률에서는 노심은 비등점(0.8KJ/g)에 도달치 않았으며, 설계 기준 사고인 100$/s의 경우에도 노심은 포화 증기 영역에 머물고 압력이 급격히 증가하는 단상(single phase)액체 영역의 threshold 값에 미치지 않기 때문에 사고는 핵연료 증기(vapor)의 점진적인 분산과 함께 종결되는 것으로 분석되며, 총 에너지 발생량은 약 1,800MJ로서 기계적 손상 에너지로 전환되는 분율을 고려할 때 KALIMER 원자로 용기의 구조 설계 기준치에 비해 상당한 여유도를 갖는 것으로 평가되었다.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.35-43
• /
• 2001

Many speech recognition systems have used pronunciation lexicon with possible multiple phonetic transcriptions for each word. The pronunciation lexicon is of often manually created. This process requires a lot of time and efforts, and furthermore, it is very difficult to maintain consistency of lexicon. To handle these problems, we present a model based on morphophon-ological analysis for automatically generating Korean pronunciation variants. By analyzing phonological variations frequently found in spoken Korean, we have derived about 700 phonemic contexts that would trigger the multilevel application of the corresponding phonological process, which consists of phonemic and allophonic rules. In generating pronunciation variants, morphological analysis is preceded to handle variations of phonological words. According to the morphological category, a set of tables reflecting phonemic context is looked up to generate pronunciation variants. Our experiments show that the proposed model produces mostly correct pronunciation variants of phonological words. Then we estimated how useful the pronunciation lexicon and training phonetic transcription using this proposed systems.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.4
• /
• pp.413-421
• /
• 2004

In this paper, a structural analysis for the pressurized water reactor(PWR) spent nuclear fuel disposal canister which is deposited under the 500m deep underground is carried out to predict the creep deformation of the canister while the underground water and swelling bentonite pressure are applied on the canister. Usually the creep deformation may be caused due to the Pressure and the high heat applied to the canister even though additional external loads are not applied to the canister. These creep deformations depend on the time. In this paper, oかy the underground water and bentonite swelling Pressure are considered for the creep deformation analysis of the canister, because the heat distribution inside canister due the spent fuel is not simple and depends on time. A proper creep function is adopted for the creep analysis. The creep analysis is carried out during $10^8$ seconds. The creep analysis results show that the creep strains are very small and these strains occur usually in the lid and bottom of the canister not in the cast iron insert. A much smaller strain is found in the cast iron insert. Hence, the creep deformation doesn't affect the structural safety of the canister, and also the creep stress which shows the stress relaxation phenomenon doesn't affect the structural safety of the canister.

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.561-566
• /
• 2010

The effects of calcium concentrations of coating bag treatment to reduce berry cracking were investigated through the changes of pericarp structure and berry cracking rate in 'Kyoho' grape. The soluble solids and anthocyanin contents in harvested grapes were highest at $18.1^{\circ}Brix$ and $2.56{\mu}g{\cdot}cm^{-2}$ in non bagging group compared with those of calcium coating bag treatments. The firmness of pericarp was lowest in non bagging group ($1.18kg{\cdot}5mm^{-1}{\O}$) compared with bagging treatments (1.23, 1.24, 1.27, $1.35kg{\cdot}5mm^{-1}{\O}$) which increased effectively in proportion to calcium concentration. As a result of histological observation of the fruit skin, the bagging with higher calcium concentration developed thicker epidermal and sub-epidermal layer of cell wall than that of non bagging. Moreover, the strengthened berry skin of calcium treatments effectively decreased berry cracking rate under critical turgor pressure. However, the 9% calcium coating bag treatment which was the most effective for cracking reduction seriously decreased marketability of harvested grape with white color staining on berry skin caused by eluted calcium from the coated paper bag. Based on our results, we recommend that 6% calcium coating bag be available for berry cracking reduction and higher quality production.

• Journal of Korea Water Resources Association
• /
• v.30 no.3
• /
• pp.269-278
• /
• 1997

Operating rules, the basic principle of reservoir operation, are mostly developed from maximum or minimum, mean inflow series so that those rules cannot be used in practical operating situations to estimate the expected benefits or provide the operating policies for uncertainty conditions. Many operating rules based on the deterministic method that considers all operation variables including inflows as known variables can not reflect to uncertainties of inflow variations. Explicit operating rules can be developed for improving the weakness. In this method, stochastic trend of inflow series, one of the reservoir operation variables, can be directly method, the stochastic technique was applied to develop reservoir operating rule. In this study, stochastic dynamic programming using the concepts was applied to develop optimal operating rule for the Chungju reservoir system. The developed operating rules are regarded as a practical usage because the operating policy is following up the basic concept of Lag-1 Markov except for flood season. This method can provide reservoir operating rule using the previous stage's inflow and the current stage's beginning storage when the current stage's inflow cannot be predicted properly.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.5
• /
• pp.965-973
• /
• 2022

As IoT(Internet of Things) devices become common, many algorithms have been developed to protect users' personal information. The laser fault injection attack that threatens those algorithms is a side-channel analysis that intentionally injects a laser beam to the outside of a device to acquire confidential information or abnormal privileges of the system. There are many studies to determine the timing of fault injection to reduce the number of necessary fault injections, but the location to inject faults is only repeatedly searched for the entire area of the device. However, when fault injection is performed in an algorithm-independent area, the attacker cannot obtain the intended faulted statement or attempt to bypass authentication, so finding areas vulnerable to fault injection and performing an attack is an important consideration in achieving a high attack success rate. In this paper, we show that a 100% attack success rate can be achieved by determining the vulnerable areas for fault injection by using electromagnetic and thermal information generated from the device's chip. Based on this, we propose an efficient fault injection attack system.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.1
• /
• pp.11-18
• /
• 2020

Carbon nanotubes are used in various industries with their excellent mechanical properties and electrical conductivity. In the construction industry, research is being conducted to give self-sensing capabilities to structures, but the results of experiments vary among researchers, and the analysis is insufficient. Therefore, in this study, the hydration and electrical properties of MWCNT-added cement pastes were measured. The electrical resistance values of hydration heat, porosity, Rietveld quantitative analysis, compressive strength, and distance were measured.. The heat resistance, porosity, Rietvelt quantitative analysis, compressive strength and distance were measured according to electrical resistance. Experimental results showed that the heat of hydration decreased with increasing MWCNT. XRD Rietveld quantitative analysis showed that there was no significant difference in the amount of hydration products with increasing addition rate of MWCNT. As a result of SEM analysis, the MWCNT is agglomerated by van der Waals forces, and this area is considered to be caused by voids and weak areas. The electrical resistance value decreases as the addition rate is increased, and thus may play a role for magnetic sensing in the future.

• Journal of the Korean Institute of Gas
• /
• v.13 no.6
• /
• pp.21-28
• /
• 2009

The purpose of this study is to gain a better understanding of the effects of thermal stratification and partial fuel stratification on reducing the pressure-rise rate and emission in HCCI combustion. The engine is fueled with Di-Methyl Ether(DME) which has unique 2-stage heat release. Computational work is conducted with multi-zones model and detailed chemical reaction scheme. Calculation result shows that wider thermal stratification and partial fuel stratification prolong combustion duration and reduce pressure rise rate. But too wide partial fuel stratification increases CO and NOx concentration in exhaust gas, and decreases combustion efficiency.