• Korean Journal of Optics and Photonics
• /
• v.10 no.2
• /
• pp.95-101
• /
• 1999

We have studied the 1.54$\mu\textrm{m}$ forward and backward stimulated Raman scattering (SRS) and stimulated Brillouin scattering (SRS) for various $CH_4$pressures by 1.06$\mu\textrm{m}$ Q-switched Nd:YAG laser pumping under a repetition rate of Hz in single pass. We obtained that the output of backward SRS was more efficient than that of the forward SRS. The output energy and conversion efficiency of forward and backward SRS were higher than those of SBS since SRS is a steady state, but SBS is a transient state. In a $CH_4$gas uncirculating system, the output energy of the backward SRS and SBS were reduced the about 47% due to a thermal heating of $CH_4$medium in a focusing region for a repetition rate of 5 Hz. But, the output energy of forward SRS was slightly enhanced by about 8.5% due to the increase of the undepleted pump beam in the backward SRS generation. Inthe Raman half resonator using a dichromatic focusing lens, the conversion efficiency of SRS was more than 37% for a input pump laser energy of 40 mJ.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.45-53
• /
• 2008

The burning behaviors of board for flooring materials were investigated using cone calorimetry at an incident heat flux of $50kWm^{-2}$. Seven domestic flooring materials were used to observe the burning behavior of maximum heat release rate, total heat release and average heat release rate. The experimental data indicated that the medium density fiberboard (MDF) flooring had higher release rate than the other flooring materials. Also, the mass loss of MDF flooring was higher than the other floors. When measuring the smoke production from burning, PE fiberboard flooring and PVC Plastic Resin Sheet showed higher carbon monoxide and carbon dioxide yield than the others. The average smoke release of both carbon dioxide and carbon monoxide through specific extinction area was similar. Toxic smoke measurement from flooring materials were determined by the mouse stop motion, and the results indicated that MDF flooring contains more toxic material than the other flooring materials.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.8
• /
• pp.93-98
• /
• 2009

Cogeneration means the highly energy-efficient generation system that improves energy ratio by generating electricity and heat, and it really affects the improvement of overall efficiency by using industrial process, district heating, and hot-water supply etc. after the energy produced through supplying power to system collects. This thesis indicates the screen of cogeneration flow in LabVIEW and the heat power control system that can be in long-distance control of a district energy system using TCP/IP. We simulated on four computers so that the heat power control system proves long-distance control possible.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.87-88
• /
• 2007

반도체 소자가 초고집적화 되어감에 따라 반도체 공정에서 선폭은 줄어들고 박막은 다층화 되어가고 있다. 이와 같은 제조 공정 하에서는 Si 기판과 금속 박막간의 확산이 커다란 문제로 부각되어 왔다. 특히 Cu는 높은 확산성에 의하여 Si 기판과 접합에서 많은 확산에 의한 문제가 발생하게 되며, 또한 선폭이 줄어듦에 따라 고열이 발생하여 실리콘으로 spiking이 발생하게 된다. 이러한 확산을 방지하기 위하여 이 논문에서는 Tungsten - Carbon - Nitrogen (W-C-N)에 Boron (B)을 첨가하였고, Boron 타겟 power을 조절하여 다양한 조성을 가지는 W-B-C-N 확산방지막을 제작하여 각 조성에 따른 증착률을 조서하였고 $1000^{\circ}C$까지 열처리하여 그 비저항을 측정하여 각 특성을 확인하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.05a
• /
• pp.525-528
• /
• 2018

최근 드론을 이용한 산업이 급부상하면서 드론 사용률이 증가하고 있다. 하지만 이에 따라 드론으로 인한 사고도 증가하고 있는데 그 중 기계고장을 제외한 가장 큰 원인은 사용자 부주의에 의해 발생한다. 이러한 문제점을 해결하기 위해 다양한 연구가 진행되고 있으나 대부분의 연구는 부가적인 장치를 통해 발생하는 센싱데이터를 이용하여 해결하는 방식이다. 이러한 방식은 비용적인 측면과 궁극적으로 사용자의 부주의에서 발생하는 문제를 해결하기 어려운 문제점이 있다. 따라서 본 논문에서는 기존의 컨트롤러와 드론에 내장되어 있은 지자기 센서를 이용하여 사용자 시점 중심적인 드론 컨트롤 시스템을 통해 이 문제를 해결한다.

• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.449-456
• /
• 2002

Recently, the application of high strength and high performance concrete has been gradually increased as an important construction material for high rise and huge scaled construction. However, high performance concrete has undesirable characteristics of spalling subjected to high temperature due to its dense microstructure content. A spalling by fire brings surface failure and falling off concrete member. It is considered that spalling by fire should be taken into account for the safety of the concrete structure under fire. Therefore, in this paper, tests are carried out using high performance concrete containing polypropylene(PP) fiber in order to improve the fire resistance performance. PP fiber contents and member sizes are varied. According to experimental results, as for the influence of PP fiber contents, all the test specimens without PP fiber show entire failure in W/C of 35％, while they show nearly sound shape except some kinds of surface fracture in W/C of 55％. When PP fiber is contained more than 0.07％, favorable prevention effects of spatting by fire are obtained. As for the effects of test specimens size, it tends to increase the possibilities of spatting by fire as test specimens become larger. And spatting by fire at the edge of test specimens occurs more frequently than at the surface of test specimens. Residual compressive and tensile strength shows 45∼65 ％ of its original strength at W/C of 35％, and 30∼40％ at W/C of 55 ％.

• The Korean Journal of Malacology
• /
• v.26 no.2
• /
• pp.151-156
• /
• 2010

For industrialization of the hard clams, Meretrix petechiails (Lamarck), spawning was induced per spawning induction technique in the artificial maturation group administered of parent maturation control and the natural maturation group of which parents were transported for artificial spawning per time period. Then, fertilization rates, hatching rates and D-shaped larva development rates were investigated. In addition, growth and survival rates of larvae were investigated per larva breeding technique. The results of spawning induction by exposure in the artificial maturation group indicated that response rates were relatively higher at 23% and 32% respectively at the 4th hour and the 8th hour of exposure. In terms of water temperature increase, responses began only when the temperature reached $28^{\circ}C$ or higher. In the experiment group administered with both exposure and water temperature increase techniques, response rate was found to be 45% or higher at the 4th hour of exposure and the temperature of $28^{\circ}C$. At the temperatures of 29, 30 and $31^{\circ}C$, significant differences were not observed. Therefore, it was indicated that the response rates of parent hard clams were higher toward water temperature increase than exposure time. As for spawning induction per time period of the transported parent group, response rate and D-shaped larva development rate were the highest at 67.6% and 96% respectively on August 6, 2009. In terms of water temperatures during larva breeding experiment, growth was faster as water temperature was higher. In addition, growth and survival rates were relatively higher at the salinity of 25. In terms of stocking density, growth and survival rates were relatively higher at 5 inds./mL.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.1040-1046
• /
• 2010

The main disadvantage of rapid setting concrete is the occurrence of cracking because of fast hydration reaction due to high thermal expansion and shrinkage. However, if the fly ash is used in concrete, it is possible to prevent cracking since the hydration heat can be decreased. Although Very-Early Strength-Latex Modified Concrete(VES-LMC) is an excellent material, occurrence of cracking has been reported because of high hydration heat. In the present study, new method which can apply the fly ash to the VES-LMC was developed. Research for the new method to improve the safety for the cracking was conducted. Safety was confirmed by reducing the shrinkage and hydration heat in the condition of overcoming the low early-age strength. Detailed conclusions are follows. Early-age compressive strength was decreased a little with increase of UFFA content. However, 28-d compressive strength was statistically insignificant regardless of UFFA contents. If the UFFA is replaced 15% to 20% of unit cement weight in concrete, maximum shrinkage can be reduced up to 43% to 47%. Usage of UFFA in VES-LMC guarantees the safety for cracking since it is very effective to control of early-age shrinkage.

• The Korean Journal of Financial Management
• /
• v.19 no.2
• /
• pp.135-157
• /
• 2002

이 논문은 1994년 1월초부터 2001년 6월말까지 미국의 S&P 500지수와 6개 아시아 신흥시장 (한국, 타이완, 홍콩, 싱가폴, 타일랜드, 말레이시아)의 대표적 주가지수의 일간수익률 자료를 이용하여 미국 주식시장으로부터 아시아 신흥시장국가에로의 정보이전 효과를 분석하였다. 이를 위해 조건부변동성을 포함하는 시계열모형을 추정하여 미국 주식시장으로부터의 수익률충격과 변동성충격을 구하였다. 그 결과, 타이완을 제외한 다른 5개국에서 강한 평균이전 효과가 관찰되고 있고, 타일랜드를 제외한 다른 모든 나라에서 (+)의 변동성이전 효과가 관찰되고 있으므로, 대체로 미국 주식시장으로부터 아시아 신흥시장에로의 정보이전 효과가 상당히 강하게 존재한다고 볼 수 있다. 한국의 경우 외환위기 이후 평균이전 효과가 크게 증가하였지만 다른 나라에서는 그렇지 않았다. 또 외환위기 이후 타이완과 홍콩에서는 변동성이전 효과가 감소하였지만, 타일랜드와 말레이시아에서는 (+)값으로 바뀌어 일관성 있는 결과가 관찰되지 않고 있다. 따라서 1997년 아시아지역에서 발생한 외환위기가 정보이전 효과를 촉진하는 계기를 제공하였다고 보기 어렵다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.75-78
• /
• 2000

본 논문은 자연스러운 합성음 생성을 위한 끊어 읽기 강도 예측에 관한 것으로, 문장에 대한 품사열이 주어졌을 때 Posteriori 확률을 최대화하는 끊어 읽기 강도를 비터비 디코딩으로 예측한다. 훈련용 데이터는 여성화자 1인이 발성한 2,100 문장이며, 음성 데이터로부터 휴지길이(pause)에 따라 끊어 읽기 강도를 2단계로 할당하고, 텍스트에서는 30개의 품사 태그 심볼을 이용하여 형태소분석 및 태깅을 수행하였다. 관측확률은 3개 연속하는 품사열이 발생할 확률로 하고 끊어 읽기 강도 천이확률은 bigram으로 했을 때, cross validation 방법으로 성능 평가를 수행하였다 평가결과, 훈련데이타에 대해서는 $89.7\%$, 테스트 데이터에 대해서는 $84.9\%$의 예측정확률을 보였다.