• 제목/요약/키워드: 열 교환기

검색결과 247건 처리시간 0.032초

발전소 온배수를 이용한 1MW급 폐쇄형 해양온도차발전 성능해석 (Analysis of 1MW Closed OTEC Cycle Using Thermal Effluent and Waste Heat)

  • 김현주;이호생;정동호;문덕수
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제34권4호
    • /
    • pp.470-476
    • /
    • 2010
  • 발전소 온배수 및 폐열을 이용한 1 MW급 폐쇄형 해양온도차발전 사이클에 대한 성능을 비교 분석하였다. 폐쇄형 해양온도차발전 사이클에 대한 열역학적 모델은 랭킨 사이클이고, 기화기 증발 열원으로 발전소 온배수를 이용하여 사이클 효율, 기화기 및 응축기 열량 등 사이클 성능을 비교 분석하였다. 발전소 온배수 온도가 증가함에 따라 기화기 내 증발 포화압력은 상승하게 되고 그로 인해 사이클 효율은 증가하였고, 총 출력 1 MW에 필요한 기화기 및 응축기 용량은 감소하였다. 따라서 발전소 온배수는 폐쇄형 해양온도차발전에서 주요한 열원으로 사용될 수 있음을 알 수 있었다. 또한, 주위 이용 가능한 폐열이 있을 때 기화기 출구 작동유체와 열교환시켜 터빈으로 유입되는 작동유체의 온도를 상승시킨다면 사이클 효율은 크게 증가할 것이다.

라지스케일 칼로리미터에 의한 멀티시스템형 에어컨실외기의 연소실험에 관한 연구 (A Study on Combustion Experiments of Multi Type Air-Conditioner Outdoor Units by Large Scale Calorimeter)

  • 민세홍;배연준
    • 한국화재소방학회논문지
    • /
    • 제25권6호
    • /
    • pp.168-177
    • /
    • 2011
  • 본 연구에서는 현재 상업용으로 가장 많이 사용되고 있는 멀티시스템형 에어컨실외기의 화재 위험성을 평가하기 위하여 에어컨실외기의 실물 연소실험을 수행하였다. 그 결과 에어컨실외기는 내부 폭발과 상부 배출 그릴을 통한 급격한 화염분출 및 화재확산을 보였으며, 이는 실외기 내부에 내장된 전선, 전자 제어판, 열교환용 동판 및 합성수지류 등의 가연물이 연소하고 냉매가스가 충전된 배관이 가열로 인해 파괴되어 냉매가스가 분출되면서 화재폭발과 외부로 화염분출을 가속시켜 일어난 것이다. 본 실험에서 에어컨실외기의 최고 열방출율은 5,830 kW로 나타났으며, 열화상 카메라 및 열전대에 의해 측정된 실외기의 내부 온도는 최고 $1,201^{\circ}C$이고, 외부온도는 최고 $881^{\circ}C$ 이상, 화염의 길이는 약 5 m 이상 상승하였다. 그러므로 에어컨실외기의 화재는 주변 가연물을 발화시키는 원인으로 작용하여 건축물에 2차 화재를 발생시킴으로써 큰 피해를 줄 수 있을 것으로 판단된다. 이러한 실물실험에서 얻어낸 결과는 향후 컴퓨터시뮬레이션에서 에어컨실외기의 화재구현 및 주변 가연물로의 화재 확산 예측에 적용될 수 있을 것이다.

1 kW급 가정용 연료개질기 성능 최적화 (Performance optimization of 1 kW class residential fuel processor)

  • 정운호;구기영;윤왕래
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2009년도 춘계학술대회 논문집
    • /
    • pp.731-734
    • /
    • 2009
  • KIER has been developed a compact and highly efficient fuel processor which is one of the key component of the residential PEM fuel cells system. The fuel processor uses methane steam reforming to convert natural gas to a mixture of water, hydrogen, carbon dioxide, carbon monoxide and unreacted methane. Then carbon monoxide is converted to carbon dioxide in water-gas-shift reactor and preferential oxidation reactor. A start-up time of the fuel processor is about 1h and CO concentration among the final product is maintained less than 5 vol. ppm. To achieve high thermal efficiency of 80% on a LHV basis, an optimal thermal network was designed. Internal heat exchange of the fuel processor is so efficient that the temperature of the reformed gas and the flue gas at the exit of the fuel processor remains less than $100^{\circ}C$. A compact design considering a mixing and distribution of the feed was applied to reduce the reactor volume. The current volume of the fuel processor is 17L with insulation.

  • PDF

화력발전용 복수기 폐열 회수를 위한 유기랭킨사이클 시스템 열교환 특성 해석 (A Heat Exchanging Characteristics of Organic Rankine Cycle for Waste Heat Recovery of Coal Fired Power Plant)

  • 정진희;임석연;김범주;유상석
    • 한국수소및신에너지학회논문집
    • /
    • 제26권1호
    • /
    • pp.64-70
    • /
    • 2015
  • Organic Rankine cycle (ORC) is an useful cycle for power generation system with low temperature heat sources ($80{\sim}400^{\circ}C$). Since the boiling point of operating fluid is low, the system is used to recover the low temperature heat source of waste heat energy. In this study, a ORC with R134a is applied to recover the waste energy of condenser of coal fired power plant. A system model is developed via Thermolib$^{(R)}$ under Simulink/MATLAB environment. The model is composed of a refrigerant heat exchanger for heat recovery from coal fired condenser, a drum, turbine, heat exchanger for ORC heat rejection, storage tank, water recirculation pump and water drip pump. System analysis parameters were heat recovery capacity, type of refrigerants, and types of turbines. The simulation model is used to analyze the heat recovery capacity of ORC power system. As a result, increasing the overall heat transfer coefficient to become the largest of turbine power is the most economical.

이중관 삼중흐름 열교환에 의한 LNG 기화시스템의 열적 해석 (Thermal Analysis of Double-tube Triple-flow LNG Vaporization System)

  • 윤상국
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제27권7호
    • /
    • pp.839-844
    • /
    • 2003
  • As sea water is being used as only heat source of LNG open rack vaporizer, serious problem has been risen in LNG terminal by the lack of heating energy source for LNG vaporization due to the temperature drop of sea water in winter. In this paper the new double-tube triple-flow(TRIDEX) vaporizer was suggested to solve the problem and the system was thermally analysed. LPG(liquefied petroleum gas) and sea water were introduced as the heat sources for LNG TRIDEX vaporizer. The flow patterns of TRIDEX vaporizer are as follows: LNG flow in the annular space, PG(petroleum gas) flow in the inner tube, and sea water flow in the outside of the double pipe. The overall LNG vaporization system was consisted of TRIDEX vaporizer, LPG vaporizer and PG heater. LPG in TRIDEX was directly dispersed in the sea water desalination unit, so that LPG turns to be gas phase for the reuse in TRIDEX vaporizer. New TRIDEX vaporizer system for LNG evaporation was analysed as much more effective than the present single tube one in the case of colder temperature of sea water in winter.

모세관 삽입 룸 에어컨용 액.가스 열교환 배관에 관한 실험적 연구 (An Experimental Study of Liquid.Gas Heat Exchange Pipe Inserted Capillary Tube for Room Air-Conditioner)

  • 김재돌
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제30권6호
    • /
    • pp.702-708
    • /
    • 2006
  • This study shows the experimental characteristics of the double pipe inserted liquid pipe with small diameter in the gas pipe with large diameter for circulating of a liquid of high temperature, pressure and a gas of low temperature, pressure at the same time. So the functions of pipe and pipe's expansion and heat transfer are presented simultaneously. In the result, the temperature of gas refrigerant at the inlet of compressor increased about $5^{\circ}C$ by the heat transfer with liquid refrigerant in case of the double pipe. And liquid gas refrigerant which the temperature at the inlet of evaporator decreased about $3^{\circ}C$ comparing with the existing type flows into an evaporator COP of the double pipe increased about $7{\sim}10%$ comparing with that of the conventional pipe. And the noise of the double pipe at capillary tube is less than that of the conventional type about 3dB. Consequently. it is convinced the superiority of the double pipe in the heat loss and soundproofing aspect.

고-기 화학열변환기의 최적설계 및 성능해석에 관한 연구 (A Study on the Optimal Design and Performance Analysis of the Solid-Gas Chemical Heat Transformer)

  • 최승훈;이세일;백일현;최익수
    • 공업화학
    • /
    • 제8권5호
    • /
    • pp.729-736
    • /
    • 1997
  • 산업폐열을 활용하기 위해 금속염화물-암모니아계 화학열변환기를 설계하고 1kW-1hr 용량의 장치개발을 하였다. 이는 $170^{\circ}C$ 열원을 $210^{\circ}C$ 이상으로 승온시키는 화학열펌프 시스템으로서, 효율적인 화학반응기의 설계를 위하여 필요한 반응물의 양과 반응물의 조건 등을 산출하는 정적계산과 동적모사를 수행하였다. 모사결과 열교환면적이나 반응기내 염의 양 등의 변수에 따라 시스템의 온도와 출력이 변함을 알 수 있었고 또한 반응물질의 양과 겉보기밀도 및 장치구조의 영향을 고찰하고 최적조건을 결정할 수 있었다. 4단계 작동사이클에 따라 운전한 결과 온도 및 출력의 실험치는 모사치와 비교하여 양호한 결과를 얻었으며 이 화학열변환기는 일정온도로 승온시킬 수 있는 특징으로 인해 앞으로 산업공정에서 배출되는 폐열원을 활용할 수 있는 시스템으로서의 가능성을 확인하였다.

  • PDF

열매체유의 인화성과 열안정성 (Flammability and Thermal Stabilities of Heat Transfer Oils)

  • 이근원;이정석;최이락
    • 한국가스학회지
    • /
    • 제15권2호
    • /
    • pp.82-87
    • /
    • 2011
  • 열매체유는 화학공장의 가열시스템, 열교환 시스템, 가스플랜트 공정, 사출성형 시스템 및 펄프제지 공정 등에 사용된다. 열매체유는 고열이나 산화분해에 아주 안정하고 저항성이 있으며, 누출이나 방출의 경우 점화원을 만나면 쉽게 발화한다. 본 논문은 열메체유의 신유와 사용유에 대해 인화성과 열적 안정성을 고찰하였다. 열매체유의 인화성은 인화점과 자연발화점을 측정하여 평가하였고, 열적안정성은 열안정성시험기와 시차주사열량기를 사용하여 평가하였다. 실험결과로부터 열매체유의 적절한 사용과 취급과 관련된 안전대책 수립을 위해 화재 위험 특성을 제시하였다.

충진층 반응기에서 고정화 cellulase에 의한 셀룰로스 가수 분해 (Hydrolysis of Cellulose by Immobilized Cellulase in a Packed Bed Reactor)

  • 강병철;이종백
    • 생명과학회지
    • /
    • 제23권11호
    • /
    • pp.1365-1370
    • /
    • 2013
  • 약 염기성 이온교환 수지에 cellulase를 고정화하였고 고정화 cellulase는 흡착 특성이 Langmuir 흡착 등온선을 잘 따랐다. pH와 온도에 대한 효소 활성은 고정화 효소가 우수한 특성을 보였다. 열에 대한 효소 활성은 1차식으로 감소하였고 고정화 효소가 자유 효소에 비해 열 안정성이 우수하였다. 초기 속도법을 통해서 자유 효소와 고정화 효소의 Michaelis-Menten 속도 상수를 결정하였고 속도상수 Km은 고정화 효소가 큰 값을 나타내었다. 충진층 반응기에서 셀룰로스의 전환 공정을 재순환에 의해 측정하였다. 투입되는 셀룰로스의 유량 변화에 대한 셀룰로스의 변환을 연속 공정에서 조사하였다. 장기 운전의 성능을 평가하기 위해 7일 통한 연속공정을 실시하였고 고정화 효소는 48%의 활성을 유지하였다.

강우기간의 토양수분량 결측값 보간방법 평가 - 누적분포함수를 이용한 결측 보간 (Evaluation of Gapfilling Method of Missing Soil Moisture Values during Rainfall Period - Gapfilling Method Based on Culmulative Distribution Function)

  • 이용준;김기영
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2023년도 학술발표회
    • /
    • pp.299-299
    • /
    • 2023
  • 토양수분(soil moisture)은 수문인자의 하나로서 토양 내에 함유된 물의 양을 의미하며, 그 총량은 미미하지만 대기와 지표면 사이에서 일어나는 복잡한 물순환과 에너지 교환을 이해하는데 있어 필수적이다. 현재 국내에서는 「수자원의 조사·계획 및 관리에 관한 법률」(이하 수자원법)에 근거해 토양수분량 관측이 이루어지고 있으며, 수자원 분야의 한국수자원조사기술원 외에도 농업, 임업 분야에서도 다양한 기관에서 지상관측소를 구축해 토양수분량을 측정하고 있다. 국내 지상관측소에서는 주로 지점규모(point scale)로 토양수분량을 관측하는 장비가 사용되고 있으며, 유전율식 장비인 TDR(Time Domain Reflectometry), FDR(Frequency Domain Reflectometry)이나 토양수분장력을 측정하는 장력계(Tensiometer)가 널리 쓰이고 있다. 수자원분야에서는 토양 내 수분의 양을 직관적으로 확인할 수 있는 유전율식 장비가 대중적으로 사용되고 있으며, 최근에는 우주선(Cosmic-Ray)으로부터 발생하는 고속중성자(Fast Neutron)를 통해 중규모 면단위(field scale) 토양수분량을 관측하는 장비인 CRNP(Cosmic-Ray Neutron Probe)에 대한 연구도 활발히 진행되고 있다. 이러한 장비는 주로 야외에 설치해 운영하고 있기 때문에 장비 훼손이나 전원공급의 어려움으로 결측이나 오측이 발생할 수 있다. 토양수분량 시계열자료의 결측이나 오측이 일반적인 감쇄기에 발생했다면 선형보간법으로도 간단히 보간할 수 있지만, 강우에 의한 상승기에 발생했다면 해당 강우사상에서의 토양수분량의 상한치를 알기 어려워 결측보간에 어려움이 있다. 본 연구에서는 토양수분량 시계열자료의 강우기간 결측을 보간하는 방법으로 누적분포함수 역변환 샘플링방법을 선택하였다. 연구에는 음성군(차곡리) 토양수분량 관측소 2021년 자료가 사용되었으며, 관측소 56개 지점 중 임의의 지점에 결측구간을 생성한 뒤 해당 지점과의 상관계수가 높은 지점의 누적분포함수를 이용해 역변환 샘플링 방식으로 임의 지점의 결측을 보간하고 그 결과를 기존값과 비교해 보간 방법의 정확도를 평가하였다.

  • PDF