• Culinary science and hospitality research
• /
• v.19 no.5
• /
• pp.49-58
• /
• 2013

The principal objective of this study was to understand the quality characteristics of kimchi added with anchovy sauce from heat and non-heat treatments. The kimchi made through such treatments contained 1.1% or 1.3% of salinity and 4.05 or 4.16 of pH. Generally, the kimchi with anchovy sauce from non-heat treatment contained higher Ca and Fe values than the one with anchovy sauce from heat treatment did. However, P, Zn, Na values were higher in the kimchi with anchovy sauce from heat treatment. Also, measurement of total-microbial, Lactobacillus sp. and Leuconostoc sp. from kimchi after filtration of anchovy sauce from heat treatment showed $5.2{\times}10^6$, $1.3{\times}10^8$, and $2.1{\times}10^8$ CFU/mL, respectively. In addition, kimchi after filtration of anchovy sauce from non-heat treatment showed $8.3{\times}10^6$, $2.5{\times}10^7$, and $1.6{\times}10^7$ CFU/mL, respectively. The present results help understand chemical compositions of kimchi and encourage its application for the food industry and cooking.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.452-454
• /
• 2012

본 논문에서는 열분해 및 촉매반응의 의한 Hydrazine의 Ammonia 전환율을 연구하였다. 원자력발전소 2차 계통은 물/증기 순환계통으로 기기 및 배관의 부식을 억제하고, 증기발생기(Steam Generator, SG)의 부식생성물 유입을 최소하기 위해 전휘발성처리법(All Volatile Treatment, AVT)을 적용하여 계통수의 pH를 약염기성으로 유지하고 있다. 또한 Hydrazine을 이용하여 계통수의 용존산소제거 및 환원성 분위기를 유지하고 있다. 현재 사용되는 AVT는 대부분 단일 아민(Ammine)으로 계통 전 영역에서 pHt를 약염기성으로 유지하기 어렵다. 따라서 복합 아민을 이용하여 단일 아민의 상호단점을 보완한 수처리법을 적용해야한다. 하지만 복합 아민을 적용할 경우 추가 아민 주입설비, 설치부지, 시설유지보수 및 관리가 요구되므로 기존 주입약품을 이용하여 아민을 공급할 수 있는 연구가 필요하다. 따라서 본 연구에서는 Hydrazine의 열분해 및 촉매반응을 이용한 Ammonia 전환율을 조사하였다.

• Journal of ILASS-Korea
• /
• v.20 no.3
• /
• pp.162-167
• /
• 2015

Recently, there has been rising interest in applying urea-SCR systems to large marine diesel engines because the International Maritime Organization (IMO) has decided to enforce NOx reduction regulations. Generally, in the case of urea-SCR of the marine diesel engine, a type of twin fluid atomizer has been using for injection of the urea solution. This study conducted to investigate an effect of the atomization of external-mixing twin fluid nozzle on the conversion efficiency of reductant. The lab-scaled experiment device was installed to mimic the urea-SCR system of the marine diesel engine for this study. In a low temperature inflow gas condition which is similar with the exhaust temperature of large marine diesel engine, this study found that the conversion efficiency of reductant of when relative big size urea solution droplets are injected into exhaust gas stream can be larger than that of when small size urea solution droplets are injected. According to results of this study, the reason was associated with decrease of reaction rate constant caused from temperature drop of inflow gas by assist air of twin fluid atomizer.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.463-469
• /
• 2012

Solar thermochemical syngas and hydrogen production process bv redox system of metal oxide was performed under direct irradiation of the metal oxide on the SiC ceramic foam device using solar simulator. $CeO_2/ZrO_2$ nanotube has been synthesized by anodic oxidation method. Syngas and hydrogen production process is one of the promising chemical pathway for storage and transportation of solar heat by converting solar energy to chemical energy. The produced syngas had the $H_2/CO$ ratio of 2, which was suitable for methanol synthesis or Fischer-Tropsch synthesis process. After ten cycles of redox reaction, $CeO_2$ was analyzed using XRD pattern and SEM image in order to characterize the physical and chemical change of metal oxide at the high temperature.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.203-204
• /
• 2016

In this research, it used cement power and reduction slag, which generates high hydration heat in hydration reation without heat cure below -5℃ degree. Purpose of final research is preventing freezing and thawing by making the compressive strength 5MPa in 3days below zero temperature due to own heat of concrete. and it is the result of physical characteristic and thermal property evaluation of reduction slag. Because reduction sag generates high hydration heat, compressive strength development is excellent. By generating highly Hydration heat by C₁₂A₇ and C₃A in reduction slag, compressive strength is developed in low temperature. In case of displacing only reduction slag without SO₃, it is indicated that quick-setting occurs by shortage of SO₃. For preventing quick-setting, gypsum is used essentially. According to this research result, in case of using reduction slag and gypsum as a ternary system, Compressive strength developed 5MPa in 3days below zero temperature. It is identified to prevent early frost damage of concrete below zero temperature.

• Journal of the Korean Chemical Society
• /
• v.39 no.1
• /
• pp.23-28
• /
• 1995

Differential-pulse cathodic stripping voltammetry was applied to the Sn(II)-cupferron complex in 0.1 M acetate buffer solution (pH 4.20). Effects of solution pH, ligand concentration, accumulation potential, and accumulation time on the reduction peak current for the adsorptive complex of Sn(II)-cupferron were investigated. Interferences by other metal cations that affected on reduction peak current were also discussed. The detection limit was 3.1${\times}$10-9 M (0.37 ppb) of Sn(II) with 60 seconds accumulation time. The relative standard deviation (n=8) for 5${\times}$10-8 M Sn(II) was 3.0%.

• Journal of the Korean Chemical Society
• /
• v.37 no.12
• /
• pp.1053-1059
• /
• 1993

The determination of iron(Ⅱ), iron(Ⅲ) and total iron was studied by differential-pulse and Tast polarography in 0.1 M acetate buffer solution at pH 4.60, Half wave potentials of iron(Ⅱ)-DTPA and iron(Ⅲ)-DTPA complexes were -0.150V vs. SCE reference electrode. In the presence of DTPA the redox process of iron(Ⅱ) and iron(Ⅲ) was reversible. Linear calibration plots were obtained for iron(Ⅱ) and iron(Ⅲ) concentration of 0.2∼1.0 mM. The detection limits of iron(Ⅱ) and iron(Ⅲ)by Tast polarographic method were 0.05 mM and 0.07 mM, respectively.

• Journal of the Korean institute of surface engineering
• /
• v.42 no.4
• /
• pp.186-189
• /
• 2009

In this study, niobium powder was made from potassium heptafluoroniobite($K_2NbF_7$) using sodium(Na) as a reductant and KCl, KF as a diluent based on the hunter metallothermic reduction method. The excesses of reductant were varied from 0%, 3%, 5% and 7%. When 7% excess of sodium was used, the un-reacted sodium remained in the reacted product. The niobium powder has been achieved by reducing 50 g of $K_2NbF_7$ with 5% sodium excess in a charge at a reduction temperature of $850^{\circ}C$. The proportion of fine fraction decreased appreciably and the yield of niobium powder improved from 65% to 85% with the increase of sodium excess. The average particle size of niobium powder is improved from 0.2 microns to 0.3 microns in the 5% excess sodium.

• Journal of the Korea Convergence Society
• /
• v.11 no.7
• /
• pp.157-162
• /
• 2020

In recent years, laser induced graphene process have been intensively studied for eco-friendly electronic device such as flexible electronics or thin film based energy storage devices because of its simple and effective process. In order to increase the performance and efficiency of an electronic device using such a graphene patterned structure, it is essential to study an optimized laser patterning condition as small as possible linewidth while maintaining the graphene-specific 2-dimensional characteristics. In this study, we analyzed to find the optimal line pattern by using a Ti:sapphire femtosecond laser based photo-thermal reduction process. we tuned intensity and scanning speed of laser spot for generating effective graphene characteristic and minimum thermal effect. As a result, we demonstrated the reduced graphene pattern of 30㎛ in linewidth by using a focused laser beam of 18㎛ in diameter.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.80.2-80.2
• /
• 2012

그라핀(graphene)은 탄소 원자의 2차원 육각형 $sp^2$ 결합체로서 탄소 나노구조체가 가지는 여러 가지 우수한 특성을 보유하면서 대면적 기판 위에서 소자구현 및 투명전극 등으로의 우수한 응용성 때문에 고품질 그라핀 제조와 물리적 특성, 소자응용에 관한 연구가 활발히 진행되고 있다. 최근 그라핀 제조를 위한 여러 가지 방법이 개발되고 있으나 화학적 박리법이 저비용으로 대량생산을 위해 가장 유리한 방법으로 주목을 받고 있다. 화학적 박리법은 벌크 그라파이트를 강한 산을 이용하여 산화시켜 형성된 산화 그라파이트(graphite oxide)을 열적으로 팽창시켜 박리하고 환원하여 그라핀으로 제조하는 것이다. 보통 열적팽창을 위해서 열처리 로를 사용하게 되는데, 본 연구에서는 박리를 보다 효율적으로 진행시키고 고품질의 그라핀을 얻기 위해 마이크로웨이브를 이용한 박리법을 적용하였다. 마이크로웨이브는 설비가 간단하고 매우 균일하게 열팽창을 시킬 수 있을 뿐만 아니라 대량생산에서도 유리할 것으로 기대하였다. 천연 그라파이트(99.9%, 평균입도 $200{\mu}m$)를 Hummer 방법에 따라 $H_2SO_4$와 $KMnO_4$를 사용하여 산화시키고 필터링 후 마이크로웨이브를 조사하였다. 이후 환원 처리를 거쳐 그라핀을 제조하였다. 라만스펙트럼 및 투과전자현미경으로 분석한 결과 우수한 품질의 그라핀이 형성되었음을 알 수 있었다. 그라핀의 두께 및 품질은 마이크로웨이브의 인가시간 및 반복 횟수가 증가함에 따라 크게 영향받는 것을 확인하였다. 본 발표에서는 마이크로웨이브를 사용한 산화 그라파이트 박리 및 그라핀 제조라는 새로운 시도와 주요변수에 따른 그라핀 특성에 관한 결과를 논의할 것이다.