• Journal of Sensor Science and Technology
• /
• v.8 no.1
• /
• pp.69-79
• /
• 1999

The research and implementation was preformed on high-resolution CCTV camera with CCD exclusive DSP conventional analog signal processor CCTV camera has its limit on auto exposure(AE), auto white balance(AWB), back light compensation(BLC) processing, severe distortion and noise of image, manual control parameter setting, etc. In our study, to resolve the problems in conventional CCTV camera, we made it possible to control AE, AWB, BLC automatically by the use of the DSP, which are used exclusively in the CCD camera produced domestically, and the microcontroller. And we utilized the function of screen display of microcontroller for the user-friendly interface to control CCD camera. And the electronic variable resister(EVR) was used to avoid setting parameters manually in the level of manufacturing process. As the result, It became possible to control parameters of the camera by program. And the cost-down effect was accomplished by improving the reliability of parameter values and reducing the efforts in setting parameters.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.4
• /
• pp.459-470
• /
• 2008

DATS which is one of three subsystems of IDACS is responsible to receive Sensor Data, LRIT and HRIT in L-Band and transmit LRIT and HRIT in S-Band from/to COMS satellite. This paper shows detailed test procedures used to verify the performance and functionality of DATS after its implementation was completely finished. As a part of efforts to verify key DATS performance, G/T and EIRP were measured by using solar flux density as radio source. Regarding the verification of DATS functionality, RF loop-back test was conducted to validate if there is no BER degradation excepting MODEM/BB implementation loss occurred in the integrated DATS. Integrated with 13m antenna, DATS successfully restored image from received MTSAT-1R broadcasting data, LRIT and HRIT, of which frequencies are all L-Band. S-Band transmission was also verified through test antenna placed away from 13m antenna by measuring real LRIT and HRIT spectrum in S-Band. From those test results, DATS is determined to be fully ready to communicate with COMS in L-Band and S-Band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.2
• /
• pp.334-343
• /
• 1997

Reference white in color television receiver can be achieved by adjusting the RGB gun current ratio and it is necessary to provide additional gain ratio adjustment for the RGB video signal. Generally, the gun current density profile has a gaussian distribution and the gain-bandwidth product of RGB channel amplifieris constant. Therefore brightness and spatial resolution are changed with variations in reference white of receiver. In this paper, the effect of RGB gun current and channel gain ratios on brightness and resolution of CPT is analyzed. Brightness is increased with the color temperature of referenc white because of Helmholtz-kohlrausch effect. The change in ligh output is more abrupt and spatial resolution is improved with unity current ratio. For more bright and improved ressolution we also present the range of color temperature of reference white for P22 phosphors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11C
• /
• pp.1077-1084
• /
• 2006

This paper proposed a fast algorithm to reduce the amount of calculation for inter prediction which takes a great deal of the operational time in H.264/AVC. This algorithm decides a search range according to the direction of predicted motion vector, and then performs an adaptive spiral search for the candidates with JM(Joint Model) FME(Fast Motion Estimation) which employs the rate-distortion optimization(RDO) method. Simultaneously, it decides a threshold cost value for each of the variable block sizes and performs the motion estimation for the variable search ranges with the threshold. These activities reduce the great amount of the complexity in inter prediction encoding. Experimental results by applying the proposed method .to various video sequences showed that the process time was decreased up to 80% comparing to the previous prediction methods. The degradation of video quality was only from 0.05dB to 0.19dB and the compression ratio decreased as small as 0.58% in average. Therefore, we are sure that the proposed method is an efficient method for the fast inter prediction.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.275-282
• /
• 2004

In this paper, a transcoding method that transforms MPEG-4 video bitstream coded in 30 Hz frame rate into H.264 video bitstream of 15 Hz frame rate is proposed. The block modes and motion vectors in MPEG-4 is utilized in H.264 for block mode conversion and motion vector (MV) interpolation methods. The proposed three types of MV interpolation method can be used without performing full motion estimation in H.264. The proposed transcoder reduces computation amount for full motion estimation in H.264 and provides good quality of H.264 video at low bitrates. In experimental results, the proposed methods achieves 3.2-4 times improvement in computational complexity compared to the cascaded pixel-domain transcoding, while the PSNR (peak signal to noise ratio) is degraded with 0.2-0.9dB depending on video sizes.

• Food Science and Preservation
• /
• v.8 no.3
• /
• pp.331-337
• /
• 2001

The oxidative stability of tallow heated was studied by different frying condition (temperature 130, 150, and 180$^{\circ}C$;heating time, each 10hours per day, total 240hrs). Changes of physicochemical parameters such as acid value, peroxide value, iodine value, dielectric constant, content of polar components and polymer, refractive index, smoke point, viscosity and color changes in tallow heated were also measured. Acid value, dielectric constant, refractive index, viscosity, and content of polar component and polymer increased as the tallow was heated longer, whereas iodine value and smoke point decreased and peroxide value was increased and decreased repeatedly. These parameters changed to a greater extent as the heating temperature went up. The color became darkened with the increase of red and yellow values during heating. The decree of coloration was proportional to heating temperature.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.12
• /
• pp.1203-1209
• /
• 2011

In this paper, the degradation evaluation method of VLC (Visible Light Communication) wireless module after high dose rate gamma-ray irradiation using the thermal infrared camera is proposed. First, the heating characteristics of the active devices embedded in the VLC wireless module during the condition of normal operation is monitored by thermal infrared camera. By the image processing technique, the trends of the intensity of the heat emitted by the active devices are calculated and stored. The feature of the blob area including the area of the active devices in the thermal infrared image is extracted and stored. The feature used in this paper is the mean value of the gray levels in the blob area. The same VLC module has been gamma irradiated at the dose rate of about 4.0 kGy/h during 72 hours up to a total dose of 288 kGy. And then, the heating characteristics of the active devices embedded in the VLC wireless module after high dose gamma ray irradiation is observed by thermal infrared camera. The high dose gamma-ray induced degradation of the active devices embedded in the VLC module was evaluated by comparing the mean value of the blob area to the one of the same blob area of the VLC module before the gamma ray irradiation.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.6
• /
• pp.32-40
• /
• 2000

In this paper, we proposed a wavelet-based digital watermarking algorithm using human visual system and subband-adaptive threshold. After the original image is transformed by discrete wavelet transform, the perceptually significant coefficients of the each subband excluding the lowest level subbands are utilized to embed the watermark. To select perceptually significant coefficients for each subband, we use subband-adaptive threshold. For the selected coefficients in the high frequency subbands, the watermark is embedded using HVS. For those of the baseband, the watermark is embedded by conventional embedding method. We tested the performance of the proposed algorithm compared with conventional watermarking algorithm by computer simulation. The experimental results show that the proposed watermarking algorithm is less visible to human eyes and more robust to image compressions, image processings, and geometric transformations than the conventional algorithm.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.348-350
• /
• 1997

Because of internal voids ininsulators give rise to partial discharge(PD), which cause local breakdown and even entire insulation breakdown. Treeing due to PD is one of the main causes of breakdown of the insulating materials and reduction of the insulation life. Therefore the necessity for establishing a method to diagnose the aging of insulation materials and to predict the breakdown of insulation has become important. From this viewpoint, our studies diagnose insulation degradation using the method of computer sensing system, which has the advantages of PD and acoustic emission(AE) sensing system. To use advantages of these two methods can be used effectively to search for treeing location and PD in some materials. In analysis method of degradation. We analyzed the PD pulse and AE pulses by regression analysis, compared to these obtained the correlation coefficient and determination coefficient by T-distribution and saw that PD and AE pulses show a similar pattern on the whole. Finally using statically operator such as the center of gravity(G), the gradient of the discharge distribution(C), we have analyzed for the prediction of life which we can be obtained the time, occurred of many pulse of small discharge amplitude.

• Journal of Broadcast Engineering
• /
• v.15 no.5
• /
• pp.697-702
• /
• 2010

Contour artifact is known as the unintentional result of quantizing a flat area that has smooth gradients. In this letter, a decontouring algorithm is proposed to efficiently remove false contours that occur in typical block-based video coding applications. First, the algorithm goes through a refinement stage to determine candidate blocks probably having noticeable false contours with different kinds of features in a block. Then, pseudo-random noise masking is applied to those blocks to mitigate the contour artifacts. This block-based selective decontouring can efficiently remove the unnecessary processing of those blocks that have no false contour, which incidentally ensures a minor penalty in visual quality and computational complexity. The proposed algorithm was demonstrated, integrated into H.264/AVC, that visual quality can be significantly enhanced with an ignorable rate-distortion (RD) loss and an minor increase in computational complexity.