• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.179-185
• /
• 1998

Mg2SiO4 열형광체에 란탄계 금속 Tb, Tm, La, Ho, Dy 및 Nd를 활성체로 첨가하여 열형광체를 제작했으며, Peak shape법으로 활성화에너지를 계산한 결과 0.53-1.77eV였으며, 발광과정의 차수는 전부 2차였다. 저 에너지 X-선에 대해 매우 높은 감도를 나타내었으므로 방사선 센서 소자로 개발하기 위한 기초 자료가 될 것이다.

• Proceedings of the Korean Society of Radiological Science
• /
• 1997.05a
• /
• pp.93.1-93.1
• /
• 1997

• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.173-178
• /
• 1998

$MgB_4O_7$: Tb, Tm, Dy, La, Ho and Nd phosphors have been prepared by sintering around $580^{\circ}C$ for 2 hours followed by flowing Ar gas. Activation energy and kinetic order of main peak of glow curve were studied by two methods peak shape method and initial rise method. By these methods, the estimated activation energies were $0.76\pm0.02eV$(Tb doped), $0.94\pm0.03eV$(Tm doped), $0.72\pm0.02eV$(Dy doped), respectively. The TL phosphors prepared in this work may be utilized to radiation sensor elements becaue of their high sensitivity to low energy X-ray.

• Journal of the Korean Society of Radiology
• /
• v.4 no.4
• /
• pp.5-10
• /
• 2010

The $Ca_2SiO_4$ phosphors doped by La with 0.1 wt%, 0.3 wt%, 0.5 wt%, and 1.0 wt% concentration were prepared by sintering at $1000^{\circ}C$ for 90 minutes in N2 atmosphere. The phosphors were ground in powdered form and were grouped in $100{\mu}m$ size, then the samples had been exposed to low energy X-ray and UV light. The TL glow curves were measured by heating the phosphors at $10^{\circ}C/s$ rate. There was no significantly meaningful correlation between the TL intensity and the doping level. The intensities of the TL peak measured from X-ray irradiated samples doped with 0.1 wt% were relatively strong. The activation energy and the frequency factor were 0.434 ~ 0.516 eV and 0.5 ~ 0.56, respectively. The intensities of the TL peak measured from UV irradiated samples doped with 0.3 wt% were relatively strong. The activation energy and frequency factor were 0.415 ~ 0.477 eV and 0.5 ~ 0.53, respectively. The TL process were found to be the 2nd order for both X-ray and UV irradiation. The TL intensity was increased linearly with the increase of the radiation dose. In summary, the $Ca_2SiO_4 phosphors developed in this study showed good TL characteristics at low energy X-ray and UV light. We believe they will be used as TLDs in near future for personal and environmental radiation detection dosimetry.

• Journal of Sensor Science and Technology
• /
• v.1 no.1
• /
• pp.59-66
• /
• 1992

To develop the highly sensitive TLD radiation sensors, $BaSO_{4}$ : Eu-PTFE TLDs are fabricated by polymerizing the PTFE(polytetrafluoroethylene) with $BaSO_{4}$ : Eu TL phosphors. The $BaSO_{4}$ : Eu TL phosphors having the highest sensitivity of $X/{\gamma}$-rays are obtained by sintering at $1000^{\circ}C$ in $N_{2}$ atmosphere a mixture of $BaSO_{4}$ powder with 1mol% Eu($Eu_{2}O_{3}$), 6mol% $NH_{4}Cl$ and 5mol% $(NH_{4})_{2}SO_{4}$ which were co-precipitated in dilute sulfuric acid and then dried. The activation energy, frequency factor and kinetic order of $BaSO_{4}$ : Eu TL phosphor are 1.17eV, $3.6{\times}10^{11}/sec$ and 1.25, respectively. And the spectral peak of $BaSO_{4}$ : Eu is about 425nm. The optimum TL Phosphor content and thickness of the $BaSO_{4}$ : Eu-PTFE TLD are 40wt% and $105.7mg/cm^{2}$. The optimum polymerization temperature and time for fabrication of $BaSO_{4}$ : Eu-PTFE TLDs are $380^{\circ}C$ and 2 hours in air, respectively. The linear dose range to ${\gamma}$ rays is 0.01-20Gy and fading rate is about 10%/60hours.

• Journal of radiological science and technology
• /
• v.21 no.2
• /
• pp.47-52
• /
• 1998

Tissue-equivalent $MgB_4O_7$ TL phosphors were prepared and the effects of Lantanides series activators on TLD properties of the phosphors were studied. The glow curve of TLD increased TL intensity and the peak temperature is low that is, the heating rate is $10^{\circ}C/sec$. The activation energy of the main peak estimated by the peak shape method. By these methods, the estimated activation energies were $0.76{\sim}1.55eV$ respectively. The TL phosphors prepared in this work may be utilized to radiation sensor elements because of this high sensitivity to X-ray.

• Korean Journal of Materials Research
• /
• v.12 no.11
• /
• pp.870-874
• /
• 2002

$Mg_2$$SiO_4$: Dy, Tb pellets were made by using a sintering process, including pressing and heat treatment. In the present study, the optimum parameters of the sintering for the $Mg_2$$SiO_4$: Dy, Tb pellets obtained such as the pressing pressure, the sintering temperature and the sintering time were in terms of thermoluminescence. Experimental results showed that the main peak of the glow curve for $Mg_2$$SiO_4$: Dy, Tb thermoluminescence dosimeter was clearly correlated with the energy of the UV and with the grain size. The intensity of the TL glow curve increased and its main peak position shifted to lower temperature with increasing UV irradiation time.

• Korean Journal of Materials Research
• /
• v.19 no.9
• /
• pp.494-498
• /
• 2009

The thermoluminescent phosphors of LiYSi$O_4$ containing rare earth metal(La) dopants of 1 wt.%5 wt.% were prepared, and their TL characteristics have been investigated as a function of parameters such as the doping level and the heating rate. The grain size and cooling temperature of the highly sensitive LiYSi$O_4$: La phosphors have been investigated. The glow curve of LiYSi$O_4$: La has two peaks ($P_1,\;P_2$), and the peak height ratio of the two peaks is called $P_2/P_1$; here, the main peak is $P_2$. Experimental results indicate that the peak height ratios of the glow curve for LiYSi$O_4$: La are clearly correlated with the grain size and cooling temperature. The maximum $P_2/P_1$ ratio 3.25, the maximum sensitivity was observed for a grain size between 100-150 ${\mu}m$. The intensity of the TL peak of the phosphors was linearly proportion to the dose of X-rays.

• Journal of radiological science and technology
• /
• v.14 no.1
• /
• pp.49-60
• /
• 1991

Thermoluminescent phosphors, which are now being used widely in radiation dosimetry, have an excellent sensitivity to ionizing radiation. In this study, thermoluminescent phosphors of $CaSO_4$ : Mn, $CaSO_4$ : Dy and $CaSO_4$ : Tm are prepared and their physical properties are investigated by measuring the trapping parameters and their luminescent spectra. By considering the sensitivity to X-ray and fading characteristics, $CaSO_4$ : Dy is most adequate to imaging plate. The imaging plate are prepared by coating the $CaSO_4$ : Dy powder on the Al substrate and its dose dependence is linear within the range of 40 mGy-20 Gy X-ray. The sensitivity of imaging plate depends linearly on the thickness of coated phosphor layer up to $35\;mg/cm^2$ and is independent on the grain size of the phosphor in the range of $70{\sim}250\;{\mu}m$. By photographing the imaging plate, X-ray images of the test object are obtained and better than those of X-ray films.

• Journal of radiological science and technology
• /
• v.20 no.1
• /
• pp.65-69
• /
• 1997

[ $Mg_2SiO_4(La.Ho)$ ] thermoluminescent phosphor was made by putting the $MgCl_2.6H_2O$ and $SiO_2$ and by doping the rare earth element of $LaCl_3.7H_2O$ and $HoCl_3$. The heating rate is $10^{\circ}C/sec$ for the thermoluminescent phosphor. Two peaks are found in the measured $Mg_2SiO_4(La.Ho)$ Tl glow curve at $152^{\circ}C$ and $205^{\circ}C$ when the heating rate is $5^{\circ}C/sec$. The peak value at $205^{\circ}C$ is the most sensitive to X-ray among the glow peaks. The activation energy of the main peak has been estimated by the peak shape method. The estimated activation energies for Ho and La are $0.52{\sim}1.77\;eV$ respectively.