• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.206-211
• /
• 2006

The quantification analysis problem is that how the m entities that have n characteristics can be linked to p-dimension space to reflect the similarity of each entity In this paper, the optimization approach for the quantification analysis problem using neural networks is suggested, and the performance is analyzed The computation of average variation volume by mean field theory that is analytical approximated mobility of a molecule system and the annealed mean field neural network approach are applied in this paper for solving the quantification analysis problem. As a result, the suggested approach by a mean field annealing neural network can obtain more optimal solution than the eigen value analysis approach in processing costs.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.6
• /
• pp.29-35
• /
• 2005

This paper presents the basic quench protection idea for the HTS(High-Temperature Superconducting) cable. In Korea power system, the transfer capability of transmission line is limited by the voltage stability, HTS cable could be one of the countermeasure to enhance the transfer limit with its higher current capacity and lower impedance[1]. However, the quench characteristic makes not only HTS cable to loss its superconductivity, but also change the impedance of the transmission line and power system operating condition dramatically. This pheonominum threats HTS cable safety as well as power system security, therefore a proper protection scheme and security control counterplan have to be established before HTS cable implementation. In this paper, the quench characteristics of HTS cable for the fault current based on heat balance equation was established and a proper protection method regarding conventional protection system was suggested.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.78-78
• /
• 2003

레이져 플래시법은 고온에서 열물성을 측정하는 수단으로 가장 많이 사용되고 있는 방법으로 알려져 있다. 각종재료의 열전도도를 측정하는 방법들이 많으나 열평형 유지, 고온, 측정시간등의 제약으로 열확산도측정이 간편하고 고온까지 가능하므로 이에 대한 측정법이 일반화되어 있다. 레이져 플레시법은 열확산도를 1초이내 측정가능하고 200$0^{\circ}C$까지 장치구현이 가능하므로 가장 많이 이용되고 있다. 그러나 장치의 검증을 위한 열확산도 표준물질이 필요로 하나 현재 열전도도 기준물질을 이용하여 검증하고 있으나 향후 열확산도 기준물질의 개발이 현재 시급하다. 현재까지 그라파이트를 중심으로한 고열전도도 연구가 진행되고 있으며, 현재 국제기관에 의해 인증된 기준물질이 부족한 실정이다. 본 연구에서는 기준물질로서 가능성을 탐색하고자 이용이 가장 많은 금속을 택하였다. 현재 텅스텐 및 몰리브덴이 고온까지 안정적이므로 두가지 재료를 택하여 실험을 수행하였다. 먼저 상온~1000K온도영역에서 열확산도 측정연구를 수행하였다. 측정된 데이터 값은 TPRC값과 비교하여 10%이내의 오차를 보였으며 고온에서 높은 안정성을 나타냄을 확인할 수 있었다. 아울러 계측시스템의 자동화 및 개량화를 통하여 실험과정에서 발생할 수 있는 오차를 줄였다. 열확산도 해석은 대수법(logarithmic법)과 Parker법을 이용하여 분석하였으며, 레이져에너지 및 시료크기에 따른 영향을 고려하여 여러가지 크기의 시편을 가지고 실험하였다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.5
• /
• pp.512-520
• /
• 2017

This paper is a numerical study of various methods of applying SOFC hot BOP insulation. The application methods are four cases from case 1 to case 4, and the performance difference between the result of applying powdered insulation and the result of zoning using composite multi-layer insulation was examined. Numerical results show that the thermal stability of composite multi-layer insulation is better than that of powder insulation when the thermal conductivity is 0.04 W/mK. In the future, we will increase the thermal conductivity of the composite multi-layer thermal insulation material and find the greatest value of thermal conductivity with a similar result to that of the powder insulation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.130-136
• /
• 1989

Electrical transport and thermally induced metastability in hydrogenated amorphous silicon (a-Si:H) thin film transistors (TFTs) using boron-doped amorphous silicon as an active layer have been studied. The device characteristics n-channel and p-channel operations. The thermal quenching experiments on amorphous silicon-silicon nitride ambipolar TFT give clear evidence for the co-existence of two distinct metastable changes. The densities of metastable active dopants and dangling bonds increase with the quenching temperature. On the other hand, the interface state density appears to decrease with increasing quenching temperature.

• Journal of Environmental Impact Assessment
• /
• v.31 no.1
• /
• pp.63-74
• /
• 2022

In orderto understand the urban thermal conditions, many studies have been conducted to estimate the thermal fluxes. Currently sensible heat fluxes are estimated through various methods, but studies about comparing the differences between each method are very insufficient. Therefore, this study try to estimate the sensible heat flux of the same area by two representative estimation methods and compare their results to confirm the significance and limitation between methods. As a result of the study, the heat balance methods has a great advantage in terms of resolution but it can not consider the anthropogenic heat flux, so sensible heat flux can be underestimated in urban areas. When estimating based on physical equation, anthropogenic heat flux can be considered and the error is relatively small, it has a limitations in time and space resolutons. The two methods showed the largest difference in industiral areas where anthropogenic heat fluxes are high, with an average of 135 W/m² and a maximum of 400 W/m². On the other hand, the green and water have a very small difference with and average of 20 W/m². The results between two methods show significant differences in urban areas, it is necessary to select a suitable method for each research purpose.

• The Journal of Korean Association of Computer Education
• /
• v.17 no.2
• /
• pp.65-76
• /
• 2014

This paper aims at implementing experimental devices with which middle school students can explore scientific ideas using GoGo Board and NetLogo that connect real and simulated worlds. Related research literature was reviewed to design a simulation-based learning model using computer simulation and robot-related activities. In order to construct devices for exploratory experiments, GoGo Board was adopted for developing the interface of Micro-Based Laboratory(MBL) devices with several sensors while NetLogo was used for connecting MBL devices (real world) and simulated experiments (virtual world). The simulation contents were developed in the area of heat equilibrium for changing temperature and the conduct-current relationship appeared in the textbook of middle school science class. With the developed device and contents students can visualize the change of temperature cold and hot waters in terms of heat equilibrium. They also can measure the change of conductor representing the relationship between conductor and current. The formative evaluation of the contents carried out with several middle school students indicated the future direction for upgrading simulation contents and interface. The results might be beneficial for science educators who want to apply simulation contents with the use of computers.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.2
• /
• pp.150-156
• /
• 2011

In this paper, infrared thermography measurement technique has been used to develop standard measurement technique for nondestructive testing of composite materials which is widely used in aerospace industries. To increase the defect detection rate, the related experiment used the lock-in IR-thermographiy method. Therefore it is of considerable interest in the field of non-destructive testing for fast discontinuity detection by using ultrasonic lock-in infrared thermography. The result also shows that as the investigation period of light source is lengthened according to the thickness of specimen, the possibility of detecting defects gets higher as well. However, the reason why the result values were not favorable when less than 50 mHz of light source was provided is because it was difficult to detect defects as the defect parts became a state of thermal equilibrium in general when thermal diffusivity affects the entire materials.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.189-197
• /
• 2004

The thermal rating of an overhead conductor, which is the maximum allowable current, is generally calculated on the basis of heat balance equation found in IEEE P738 standard. This is given as a function of the weather conditions such as air temperature, wind speed, wind direction, and sun heat. Wind speed among such weather parameters is strongly affected on determining the line rating when it appears very low level. Therefore there may occur inaccuracy since most anemometers used in line rating monitor systems may show low resolutions and stall speed performance. In this paper, we introduce a new methodology for determining the dynamic line rating in overhead transmission lines, without using my anemometer. It was shown that wind speed can be estimated by the temperatures of 2 indirect conductors, and through experimental study, the dynamic line rating obtained by the estimated wind speed was very closely that of weather model.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.4
• /
• pp.1-11
• /
• 1999

Thermal behavior of spacecraft propulsion system utilizing monopropellant hydrazine ($N_2$$H_4$) is addressed in this paper. Thermal control performance to prevent propellant freezing in spacecraft-operational orbit was test-verified under simulated on-orbit environment. The on-orbit environment was thermally achieved in space-simulation chamber and by the absorbed-heat flux method that implements an artificial heating through to the spacecraft bus panels enclosing the propulsion system. Test results obtained in terms of temperature history of propulsion components are presented and reduced into duty cycles of the avionics heaters which are dedicated to thermal control of those components. The duty cycles are subsequently converted into the electrical power required in the operational orbit. Additionally, cyclic temperature of each component, which was made under thermal-balanced condition of spacecraft, is compared to the acceptable design range and justified from the viewpoint of system verification.