• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.296-297
• /
• 2011

A series of thermogravimetric analysis tests were conducted to predict the lifetime of the PTFE electrical insulation material. The prepared PTFE samples were heated from $25^{\circ}C$ to $700^{\circ}C$ at different heating rates. The kinetic energy of the PTFE was calculated from the logarithmic heating rate versus reciprocal temperature curves at constant conversion levels. Also, the lifetime of the PTFE for a given operating temperature can be predicted using the relationship between the activation energy and the estimated lifetime proposed by Toop.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.1-6
• /
• 2019

The activation energy of CPVC (Chlorinated Poly Vinyl Chloride) used for non-metallic synthetic resin piping in fire-fighting was measured by thermogravimetric analysis (TGA). The activation energy was determined using by TGA kinetic methods, such as Kissinger and Flynn-Wall-Ozawa method. The calculated activation energy was 128.07 kJ/mol (Kissinger method) and 145.60 kJ/mol (Flynn-Wall-Ozawa method). The difference in activation energies calculated by the Kissinger method and Flynn-Wall-Ozawa method was not considered to be significant considering that the different analysis methods. The combustion characteristics will be tested in a future study through an evaluation of thermal deterioration using an accelerated deterioration and air oven aging test and the lifetime of CPVC will be predicted.

• Composites Research
• /
• v.28 no.5
• /
• pp.316-321
• /
• 2015

This study investigated the effects of microcapsules on mechanical properties and thermal stability of the composite material containing self-healing microcapsules. To this end, tensile specimens and flexural specimens containing melamine-urea-formaldehyde (M-U-F) shell walled microcapsules with diameters of $70{\sim}130{\mu}m$ were manufactured. Varying amount of microcapsules in the specimens was considered: 0 wt%, 0.5 wt%, and 1.0 wt%. The tensile and flexural tests were conducted to evaluate mechanical properties of the specimens containing the microcapsules and the thermogravimetric analysis test was performed to evaluate the thermal stability of the specimens containing the microcapsules. The results show that the tensile strength of the specimens was sensitive to the amount of the microcapsules compared to the tensile modulus even though the tensile modulus of the specimens was not significantly affected by the amount of the microcapsules. However, reduction of the tensile strength was not linearly proportional to the amount of microcapsules; similar results were observed in the flexural test. The weight changes of the specimens containing the microcapsules, as a function of temperature, were similar to those specimens without microcapsules. The thermal stability of the specimens was not affected significantly by the microcapsules embedded in the specimens.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.352-352
• /
• 2004

산화물 형태의 사용후핵연료를 고온 용융염계에서 금속 형태로 전환하는 전기화학적 금속전환 공정 개발의 일환으로 $U_3O_8$ 분말로 충전된 다공성 마그네시아 용기 및 스테인레스강 고체전극으로 구성된 일체형 음극과 $SnO_2$ 재질의 양극을 사용하여 5kg $U_3O_8$/batch 규모의 mock-up 시험을 수행하였다. 백금 재질의 양극을 사용하였을 때 99% 이상의 금속전환율을 보인 동일한 전하량을 공급하고 실험을 중단한 결과 X-선 회절분석(XRD) 및 열중량 분석(TG)으로부터 스테인레스강 고체전극 부분에서는 거의 금속으로 전환되었으나 다공성 마그네시아 용기 부분에서는 비교적 금속전환율이 낮은 경향을 나타내었다.(중략)

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.3
• /
• pp.41-46
• /
• 2020

In this study, measurement and analysis results from Differential scanning calorimetry(DSC) and Thermogravimetric analysis(TGA) on the newly developed high-energy thermoplastic elastomer(ETPE) propellant are described, followed by the previous study done under the same title as this paper [1]. The characteristics of high-energy thermoplastic propellant were also verified by conducting thermal analysis, and the LSGT, Shotgun & RQ Bomb test, was carried out as well. High energetic thermoplastic binders containing 45% of GAP(Glycidyl Azide Polymer), energetic plasticizer(DEGDN) and Oxidizer Aonium Perchlorate), RDX(reseach development explosive, cyclotrimethylenetrinitramine) were used to formulate the propellant.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.400-403
• /
• 2011

본 논문에서는 시차열중량분석법과 X-선 회절분석법을 이용한 원전콘크리트의 탄산화에 의한 열화도 평가를 진행하였으며 두 가지 정성적 분석방법을 이용한 반정량적 평가 방법을 개발하였다. 원자력발전소 건설에 사용된 동일한 콘크리트 배합을 사용한 시편을 촉진 탄산화 시험장치에 28, 56, 91, 180, 365일 기간에 걸쳐 노출시켜 탄산화를 진행하였으며 노출된 시편은 시차열중량분석법, X-선 회절분석법을 이용하여 탄산화에 따라 발생된 열화생성물의 양을 정성적으로 분석하였다. 그 결과, 탄산화로 인해 발생되는 Calcite의 양이 노출기간에 따라 점차적으로 증가되는 것이 확인되었으며, Calcite의 생성을 위해 이산화탄소와 반응하는 Portlandite의 양이 점차적으로 감소되는 것이 확인되었다. 본 논문에서는 위의 언급된 두 방법의 관계성을 통해 열화도 평가를 진행하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.147-147
• /
• 2003

탄소/탄소 복합체의 내산화 코팅을 위하여 산화티탄, 산화알루미늄, 산화이트륨 등을 포함하는 여러 가지 인산염계 유리를 제조하였다. 유리 산화물조성 몰비는 인산에 대하여 인산알루미늄을 15몰%, 30몰%, 45몰%로 하였고 산화티탄은 70몰%, 산화 이트륨은 25몰%이 되도록 코팅 액을 제조하였다. 제조 된 코팅액은 석영 도가니에서 열처리 하여 급냉 시켰으며, 급냉 시키고 다시 130$0^{\circ}C$, 1시간 동안 열처리하여 유리를 제조하였다. 제조된 유리의 열중량, 열팽창율, 열전도도를 분석하여 탄소 복합체와의 적합성을 조사하고, 내산화성 시험을 위해 탄소/탄소 복합체에 코팅액을 도포하여 산화 감량 비율을 측정하였다. 엑스선 회절분석기와 적외선 분광기를 통하여 인산염 유리의 구조분석을 실시하고 비커스 미세 경도 시험기를 이용하여 기계적 물성을 측정하였다.

• Journal of Korea Foundry Society
• /
• v.41 no.6
• /
• pp.516-520
• /
• 2021

During sand casting, the binders produces gases in cores because high temperature molten metals dissolve the binders into gases and causes gas defects in the casting products. In the present study, quantitative analysis of inorganic binder gas generation was performed using Thermo Gravimetry (TG) and Mass Spectrometer (MS) analyses. The specimen was prepared using organic binders in liquid and solid state, and a mixture of sand and binders. Moisture loss by catalysts was calculated by TG results from liquid and solid binder specimens; it was found that components of gases were different. Quantitative analysis was discussed for generated gases with individual gas component results obtained using TG and MS. It is expected that gas generation can be predicted in the casting simulation using the technique proposed in the present study.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.4
• /
• pp.1-8
• /
• 2012

The aim of this study is to evaluate fire-induced damage for shield tunnel linings. Full-scale fire test was conducted to evaluate fire-induced damage. Residual compressive strength was measured on the core samples of shield tunnel lining subjected to high temperatures. Heating temperature was predicted by XRD and TG analysis. As a result, Strength degradation of concrete with temperatures can be evaluated by residual compressive strength of core samples. In addition, residual compressive strength can be estimated by previous studies if heating temperature is exactly predicted. It is possible that heating temperature is predicted by XRD and TG analysis at $450^{\circ}C$. For more accurate prediction of heating temperature it should be performed both instrumental analysis and analytical methods with temperatures ranging from $400{\sim}600^{\circ}C$.

• Fire Science and Engineering
• /
• v.13 no.1
• /
• pp.3-10
• /
• 1999

We had investigated combustion properties of natural textile dusts. Decomposition properles of natural textile dusts scavenged by precipitator of spinning factoη were investigated using D DSC(Differential Scanning Calorimeter) and TGA(Thermogravimetric Analysis) by temperature c changes. Combustion pro야rties of natural textile according to size distribution and amount were c checked as temperature variation according to time using spontan$\infty$us ignition apparatus. M Moreover, combustion properties with blowing or without blowing condition were checked in order to investigate combustion prope$\pi$ies in spontaneous ignition apparatus according to flow c condition of air. As results of thermal analyses, increase in r머sing tern야:rature causes initial smold벼ng t temperature to move towards low temperature section 뻐d i띠디떠 smoldering temperature was d de$\sigma$eased more remarkably in atmosphere than in inert gas and that condition allowed heating v value to increase considerably. In addition, as amount and size distribution of natural textile d dusts were increased, i띠ti머 smoldering temperature was lowered. All of combustion forms were s smoldering combustion. Initial smold밍ing temperature was low more slightly with blowing c condition than without blowing condition in sp$\alpha$ltaneoUS ignition apparatus, which condition m made heatim;!; value high.