• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1993.05a
• /
• pp.116-119
• /
• 1993

고체연료의 연료특성을 완전히 파악하기는 어렵다. 하지만 기존의 알고있는 자료를 이용해서 고체연료의 연소특성을 예측할 수 있을 것이다. 그래서, 이미 어느 정도 알려져 있는 미분탄의 연소특성을 이용하여 폐기물의 연소특성을 예측하기 위해서 새로운 열중량 분석장치를 개발하게 되었으며, 여기에서는 그 개발절차 및 기초실험 결과를 실었다. 기초실험 결과 미소질량일 경우와 약간의 차이가 발견되었다. 그러나 그 개형은 기존의 자료들과 큰 차이가 없는 것으로 보여진다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.468-470
• /
• 2008

열중량반응기와 미분반응기를 이용하여 ABS의 열분해 및 생성물분포 특성을 연구하였으며 미분반응기를 이용한 실험의 열분해온도는 $410{\sim}450^{\circ}C$이었다. 각 상의 열분해생성물의 수율은 무게측정을 통해 얻었으며 액상생성물의 탄소수분포는 GC-SIMDIS 방법을 통해 측정하였다. 열중량 분석실험에서는 측정할 수 없었던 다량의 고상잔류물의 생성을 회분식 미분반응기실험을 통해 확인할 수 있었다. 반응온도와 시간이 증가할수록 액상생성물의 수율과 평균분자량은 감소하였으나 액상생성물 중의 스티렌모노머의 생성은 두드러지게 증가하였다. ABS 열분해 반응에서 말단절단의 속도계수인 활성화에너지 값은 54.1kcal/mole이었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.421-424
• /
• 2011

Thermal Analyses are conducted to measure various factors of a liquid fuel required for numerical analysis. Thermal Analyses are divided into two different methods of TGA (Thermo Gravimetric Analysis) and DSC (Differential Scanning Calorimetry). Non-isothermal experimental results are analyzed using by TGA. The results are filtered by a Freeman Carroll method. At the same time, chemical parameters of unknown liquid fuel, activation temperature and reaction order are measured to 6128.2 K and 1.4, respectively. Furthermore, the parameters can be obtained by various mathematical methods. It is found that tha parameters depend on the processing method.

• Fire Science and Engineering
• /
• v.26 no.1
• /
• pp.89-95
• /
• 2012

In this study, we were manufactured wood flour-HDPE composites by modular co-rotating twin screw extruder with L/D ratio of 42. We was measured cone calorimeter test and thermogravimetric analysis (TGA) to find the combustion characteristics and thermal properties for wood flour-HDPE composites. We then evaluated the effect of three additive-type flame retardants on fire resistance performance. The cone calorimeter test showed that the heat release rate (HRR) of untreated composites was the highest Peak HRR ($446.6kW/m^2$) as well as Mean HRR ($185.5kW/m^2$). From the TGA, it was shown that composites added flame retardants began early thermal decomposition and improved thermal stability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.257-263
• /
• 2008

We have examined explosion characteristics of bituminous coal dusts in cement manufacturing process. In order to find the thermal properties, we investigated weight loss and ignition temperature of coal materials using TGA and DSC. Also specific surface area of dust was investigated. Dust explosion experiments with Hartman's dust explosion apparatus have been conducted by varying concentration and size of coal dust for explosion probability and lower limit explosion concentration. According to the results for thermal properties, there is a little change by dust size. However, the specific surface area of dust is increased by decreasing dust size. The explosion test results show that small size and increasing concentration of dusts make dust explosion easier. And we find that the lower limit explosion concentration of bituminous coal is $0.3mg/cm^3$ and the probability is 100% on $0.9mg/cm^3$ in 170/200 mesh used in cement manufacturing process.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1063-1072
• /
• 2000

Kinetic tests on pyrolysis of the mixture of waste automobile lubricating oil and polystyrene were carried out with thermogravimetric technique at the heating rates of 0.5, 1.0, $2.0^{\circ}C/min$ in a stirred batch reactor. The activation energy and the reaction order were determined at conversions of 1 to 100% using differential method. The mixture of waste automobile lubricating oil and polystyrene was pyrolyzed at lower temperature rather than waste automobile lubricating oil and polystyrene. respectively. Also, the thermal decomposition took place in two broad reaction steps. The pyrolyzed oil of mixture represented high selectivity of styrene monomer and dimer like that of polystyrene pyrolyzed products.

• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.296-300
• /
• 2011

In this work, various wood biomasses were used to determine the combustion characteristics for the fuel of cogeneration plant. Combustion characteristics of four types, i.e., (i) forest products, (ii) recycled wood, (iii) empty fruit bunch, and (iv) palm kernel shell, were examined via thermal gravimetric analyzer (TGA) in air atmosphere and coal was used as a comparison group. From the TGA results, the combustion of the wood biomass was occurred in the range of 280 to $420^{\circ}C$, which was lower than that of coal. Forest product showed the lowest activation energy (0.4 kJ/mol) compared to that of other wood biomasses (about 6 to 14 kJ/mol) and coal (64 kJ/mol). In addition, the reaction rate constant of the wood biomass was lower than that of coal. These results indicate the higher combustion initiation rate of wood biomass due to the high content of volatile matter, which had a low boiling point.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.1059-1066
• /
• 2008

Characteristics of pyrolysis and liquid product distribution of ABS plastics have been studied in the thermogravimetric(TG) reactor and bomb microreactor. Pyrolysis reactions were performed at temperature $400\sim450^{\circ}C$ and yield of each pyrolytic product was obtained by the weight measurement method. The molecular weight distributions of liquid products were determined by the GC-SIMDIS method. It was observed that solid residue which could not be detected in the thermogravimetric experiments was significantly formed in the batch-type microreactor. It was found that the yield and average molecular weight of liquid products were decreased with the increase of reaction temperature and time. but the formation of styrene monomer was significantly increased. The chain-end scission rate parameters were determined to be 54.1kcal/mole far ABS by the Arrhenius plot.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.96-100
• /
• 2000

Recently ocean environmental pollution becomes very serious, so each governmental organization slove this problem. As part of the policy, KRISO has investigated distribution condition at ocean waste. Acc\ulcorner we found that combustble waste consists of ropes, fishing nets, and tires. These are, however, highly polyme\ulcorner existing incicerators have many problems to treat these. In this study we want to pyrolyze highly polymerized \ulcorner data for a design of fule production system without second pollution. Through the thermogravimetic experiment characteristics of pyrolysis and obtained some preliminary results.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.2
• /
• pp.130-134
• /
• 2001

Recently environmental pollution at sea becomes serious, so every governmental organization makes its effort to solve this problem. Combustible ocean wastes as of ropes, fishing nets, and tires are usually highly polymerized compound materials. The problem of ocean waste treatment can be solved by using the pyrolysis method. Pyrolysis characteristics of ocean waste was examined to get the basic data for the production system of fuel from the ocean waste. Thermogravimetric experiment showed that residual mass rate decreases as the velocity of temperature-rising becomes lower. The pyrolysis of waste rope and fishing net occurs at 300~450$^{\circ}C $ and the waste tire does at 350~450$^{\circ}C $. Pyrolysis time is estimated about 15 to 20 minutes in the temperature range when lively act of pyrolysis temperature reached.