• Korean Journal of Materials Research
• /
• v.16 no.6
• /
• pp.377-381
• /
• 2006

Skutterudite $CoSb_3$ doped with nickel was prepared by encapsulated induction melting, and its doping effects on thermoelectric properties were investigated. Single phase ${\delta}-CoSb_3$ was successfully obtained by encapsulated induction melting and subsequent heat treatment at 773 K for 24 h. Nickel atoms acted as electron donors by substituting cobalt atoms. Thermoelectric properties were remarkably improved by appropriate heat treatment and doping, and they were closely related to phase transitions and dopant activation. The maximum ZT(dimensionless figure of merit) was achieved as 0.2 at 600 K for the $Co_{0.93}Ni_{0.07}Sb_3$ specimen.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.4
• /
• pp.249-254
• /
• 2018

We researched about a bulk metallic glass system as an additive to an Ag paste for high temperature thermoelectric modules. Bulk metallic glass (BMG) ribbons were produced by using a rapid solidification process (RSP) under a cooling rate condition higher than $10^{\circ}C/sec$. We investigated BMG characteristics of the ribbons by means of x-ray diffraction (XRD) and differential scanning calorimetry (DSC) in order to evaluate the glass transition temperature ($T_g$) and the recrystallization temperature ($T_x$) lower than $400^{\circ}C$. A milling process was also developed to apply the BMG ribbons to a commercial Al paste as an additive for lower sintering temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.142-142
• /
• 2007

Micro thermoelectric generator has been attractive for the alternative power source to operate the wireless sensor node. In this paper, we designed the column-type micro thermoelectric device and their device characteristics were measured. n-type Bi2Te3 and p-type BiSbTe3 thermoelectric thin films were grown on (001) GaAs substrates by metal organic chemical vapour deposition (MOCVD) and they were pattemed. The height of thermoelectric film were controlled by the deposition time, temperature and MO-x gas pressure. Seebeck coefficient was measured at room temperature and hole concentration and electrical resistivity of thermoelectric film were also characterized.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.83-84
• /
• 2007

Sn-filled and Ni-doped $CoSb_3$ skutterudites were prepared by encapsulated induction melting, and their filling and doping effects on thermoelectric properties were investigated. Single phase ${\delta}-CoSb_3$ was successfully obtained by encapsulated induction melting and subsequent heat treatment at 823K for 5 days. Nickel atoms acted as electron donors by substituting cobalt atoms. Thermoelectric properties were remarkably improved by Sn filling and Ni doping.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.6
• /
• pp.495-499
• /
• 2020

Power factor improvement at high temperatures has been a major research topic for the development of skutterudite thermoelectric materials. Here, we attempted to optimize the process parameters for manufacturing skutterudite materials, especially for p-type systems. We focused on the effect of aging time variation to maximize the high-temperature performance of the Ce-filled Fe³CoSb¹² skutterudite system. The optimized aging time was concluded to be a key parameter for the formation of single-phase nanostructures in this p-type skutterudite system. The optimized condition was effective in reducing the bipolar effect at high temperature ranges by increasing the carrier concentration in the p-type system. To confirm the conclusions, the electrical conductivity, Seebeck coefficient, and power factor were measured. The results matched well with the microstructure and with those of an XRD analysis performed for the system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.138-139
• /
• 2006

Metal organic chemical vapor deposition has been investigated for growth of $Sb_{2-x}Bi_xTe_3$ films on (001) GaAs substrates using diisopropyltelluride, triethylantimony and trimethylbismuth as metal organic sources. The thermoelectric properties were measured at room temperature and include Seebeck coefficient, electrical conductivity and Hall effect. In-plane carrier concentration and electrical Hall mobility were highly dependent on precursor's composition ratio and deposition temperature. The thermoelectric Power factor($={\alpha}^2{\sigma}$) was calculated from theses properties. The best Power factor was $2.6\;{\times}\;10^{-3}W/mK^2$, given by grown $Sb_{1.6}Bi_{0.4}Te_3$ at $450^{\circ}C$. These materials could potentially be incorporated into advanced thermoelectric unicouples for a variety of power generation applications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.352-353
• /
• 2006

가스센서용 마이크로 히터 제작에는 표연 마이크로 머시닝 또는 벌크 마이크로머시닝 기술을 이용한다. 표면 마이크로 머시닝에 의한 마이크로 히터 (MHP) 구조의 경우, 기판과 박막간의 폭이 좁기 때문에 에칭 공정 후 세정이 잘 이루어지지 않으면 열적 절연이 잘 이루어지지 않아서 히터와 센서의 성능을 저하시키는 원인이 된다. 본 연구에서는 표면 마이크로 머시닝 기술에 의한 가스 센서용 마이크로 히터를 제작한다. $SiO_2$와 $Si_3N_4$를 성분으로 하며, $100{\mu}m\;{\times}\;100{\mu}m$의 면적과 350 nm 의 두께를 갖는 가스 센서용 마이크로 히터를 제작하였다. 이를 위하여 ANSYS를 통한 유한요소해석에 의한 열분포 해석으로 최적구조를 확인하였다. 센서로의 열 전달 효율을 높이기 위해 센서 박막은 히터 위에 적층하였다. 실리콘 표면과 마이크로 히터와의 간격은 에칭 공정을 통하여 $2{\mu}m$로 하였으며, 이 공간에서는 에칭 및 세정 후에 이물질이 깨끗이 세정되지 않고 남아 있거나, 습식 공정 중에 수분의 장력에 의한 열전연성이 나빠질 수 있는 등 단점이 있다. 이는 건식 등방성 에칭 공정을 통하여 해결하였다.

• Korean Journal of Materials Research
• /
• v.15 no.7
• /
• pp.473-479
• /
• 2005

Thermoelectric $Zn_4Sb_3$ alloys were synthesized by a conventional powder metallurgy process consisting of solid state reaction and hot pressing. Single phase $Zn_4Sb_3$ was successfully produced by the annealing of cold compact starting with the mixed elemental powders, and subsequent hot pressing yielded single phase bulk specimens without microcracks. Phase transformations in this alloy system during synthesis were investigated using XRD, SEM and EDS. Thermoelectric properties as a function of temperature were investigated from room temperature to 600 K and compared with results of analogue studies. Transport properties at room temperature were also evaluated. Thermoelectric properties of single phase $Zn_4Sb_3$ materials produced by this process are comparable to the published data. Synthesis by solid state reaction and hot pressing offers a potential processing route to produce a bulk $Zn_4Sb_3$.ٓ

• Korean Journal of Materials Research
• /
• v.8 no.4
• /
• pp.337-344
• /
• 1998

화염가수분해증착법에 의해 형성된 $0.1\mu\textrm{m}$크기의 soot를 실리콘 기판위에 형성하여 $1325^{\circ}C$에서 2시간 동안 고밀화과정후 투명한 후막을 얻을 수 있었다. 고밀화 열처리는 탈수과정, 재배열 과정, 그리고 고밀화 과정으로 구성되었다. 고밀화 공정후의 두께 수축률은 초기 soot의 96%정도였으며, 급속한 두께의 감소는 $950^{\circ}C$부터 시작되었으며, 본격적인 고밀화가 시작되는 온도는 $1250^{\circ}C$임을 알 수 있었다. soot의 TGA와 DTA를 이용한 열분석 결과 탈수과정에 의하여 9/wt%의 질량감소와 $1250^{\circ}C$이상에서 인(P)의 증발에 의한 2wt%의 질량감소를 관찰하였다. DTA곡선에서는 $500^{\circ}C$, $570^{\circ}C$. $1258^{\circ}C$에서 흡열반응 피크를 나타내는데, 이는 $B_{2}$$O_{3}$, $P_{2}$$O_{5}$ 등의 도펀트들의 melting과 실리카 입자사이의 기공이 소멸되면서 입자간의 열전도도의 증가에 의해 나타난 것으로 판단된다.

• Korean Journal of Materials Research
• /
• v.15 no.7
• /
• pp.435-438
• /
• 2005

Single phase $Zn_4Sb_3$ with $98.5\%$ of theoretical density was successfully produced by direct hot pressing of elemental powders containing $1.2 at\%$ excess Zn for compensating the evaporation during the process. Temperature dependences of thermoelectric properties were investigated from 4 K to 300 K. Seebeck coefficient, electrical conductivity, thermal conductivity as well as thermoelectric figure of merit showed the discontinuity in variation at 242K, indicating the $\alpha-\beta$, phase transformation. Interestingly, it was found that lattice thermal conductivity by phonons is dominant in total thermal conductivity of $\alpha-\beta$. Therefore, it is expected that thermoelectric properties can be improved by reduction of lattice thermal conductivity inducing lattice scattering centers by doping and solid solution.