• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.5
• /
• pp.555-566
• /
• 2023

In this study, a composite phase change material (CPCM) produced using the SOL-GEL technique was developed as a thermal energy storage medium for low-temperature applications. Tetradecane and activated carbon (AC) were used as the core and supporting materials, respectively. The tetradecane phase change material (PCM) was impregnated into the porous structure of AC using the vacuum impregnation method, and a thin layer of silica gel was coated on the prepared composite using the SOL-GEL process, where tetraethyl orthosilicate (TEOS) was used as the silica source. The thermal performance of the CPCM was analysed using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). DSC results showed that the pure tetradecane PCM had melting and freezing temperatures of 6.4℃ and 1.3℃ and corresponding enthalpies 226 J/g and 223.8 J/g, respectively. The CPCM exhibited enthalpy of 32.98 J/g and 27.7 J/g during the melting and freezing processes at 7.1℃ and 2.4℃, respectively. TGA test results revealed that the AC is thermally stable up to 500℃, which is much higher than the decomposition temperature of the pure tetradecane, which is around 120℃. Moreover, in the case of AC-PCM and CPCM thermal degradation started at 80℃ and 100℃, respectively. The chemical stability of the CPCM was studied using Fourier-transform infrared (FT-IR) spectroscopy, and the results confirmed that the developed composite is chemically stable. Finally, the surface morphology of the AC and CPCM was analysed using scanning electron microscopy (SEM), which confirmed the presence of a thin layer of silica gel on the AC surface after the SOL-GEL process.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.192-192
• /
• 2011

교토의정서에서 지구온난화의 원인이 되는 온실가스로 $CO_2$, $CH_4$, $N_2O$, HFCs, PFCs, $SF_6$를 규제하고 있다. 규제하는 6대 온실가스 가운데 $CO_2$가 가장 대표적이며, 우리나라의 연료연소에 의한 $CO_2$ 배출량은 세계 10위로 기후변화 진행속도는 세계 평균속도보다 빠르게 진행되고 있다. 이러한 기후변화에 대응하기 위하여는 온실가스 배출로 인한 DB구축 연구가 선행되어야 하며, 산림부분에 있어서는 연료의 열적특성 구명 연구가 극도로 미진한 국내현실에서 기초 data 확보를 위한 연구가 시급한 실정이다. 따라서, 본 연구에서는 산불발생 시 온실가스 배출량의 DB를 구축하기 위하여 산불발생 시 배출되는 탄소배출량을 예측하고자 산림 가연물의 연소실험을 수행 하였다. 연소실험은 산림 연료 가운데 지표연료 10가지(소나무낙엽, 굴참나무낙엽, 소나무솔방울, 밤나무밤송이껍질, 방아풀, 주름조개풀, 칡, 엉겅퀴, 김의털, 고비)를 대상으로 콘칼로리미터 장비를 이용하여 이산화탄소와 일산화탄소 배출량을 분석하였다. 탄소배출량 실험에 앞서 지표연료들의 함수율을 측정한 결과, 10가지 지표연료 가운데 고사한 연료(낙엽, 솔방울, 밤송이)는 9~24% 정도, 생연료인 초본류 6가지는 181~484% 정도인 것으로 나타났으며, 솔방울과 밤송이의 경우 9~10%로 가장 수분을 적게 함유하고 있음을 알 수 있었다. 탄소배출량 분석 결과, 50g 중량에 대한 10가지 지표연료들의 이산화탄소 총배출량은 28~98g 정도, 일산화탄소 총배출량은 0.76~4.08g 정도 배출하는 것으로 나타나 연료별 차이를 보였으며, 특히, 고사한 연료와 생연료의 탄소배출량 차이는 큰 것으로 나타났다. 일산화탄소 총배출량은 고사한 연료(소나무낙엽, 굴참나무 낙엽, 소나무 솔방울, 밤나무 밤송이)는 3.24~4.08g 정도, 생연료 초본류 6가지(방아풀, 주름조개풀, 칡, 엉겅퀴, 김의털, 고비)는 0.76~2.73g 정도 배출하는 것으로 나타났다. 이산화탄소 총배출량은 함수율이 현저히 낮은 4가지 연료(소나무 낙엽, 굴참나무 낙엽, 소나무 솔방울, 밤나무 밤송이 껍질)들은 52~98g 정도, 함수율이 높은 6가지 초본류는 28~48g 정도의 이산화탄소를 배출하는 것으로 나타났다. 따라서, 고사한 연료인 소나무 낙엽, 굴참나무 낙엽, 소나무 솔방울, 밤나무 밤송이는 초본류 보다 상대적으로 이산화탄소와 일산화탄소 배출량이 많은 것으로 나타났으며, 특히, 소나무 솔방울은 가장 많은 이산화탄소와 일산화탄소를 배출하는 것으로 나타났다. 상대적으로 방아풀과 주름조개풀은 각각 28g과 35g으로 이산화탄소 배출량이 작은 것으로 나타났다. 따라서, 산불발생 시, 소나무의 솔방울은 10가지 지표연료 가운데 상대적으로 많은 이산화탄소와 일산화탄소를 배출할 것으로 사료된다.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.510-517
• /
• 2014

A series of polyimide (PI) was prepared by reacting 4,4'-(hexafluoroisopropylidene)-diphthalic anhydride (6FDA) as the anhydride and bis(3-aminophenyl) sulfone (APS), bis[4-(3-aminophenoxy)-phenyl] sulfone (BAPS), 2,2-bis(4-aminophenyl)-hexafluoropropane (6FPD), 2,2-bis[4-(4-aminophenoxy)-phenyl]hexafluoropropane (6FBAPP), 2,2'-bis(trifluoromethyl)benzidine (TFDB), or 1,4-phenylenediamine (PDA) as the diamine. Residual stress behaviors were detected in-situ during thermal imidization of the polyimide precursors using a thin film stress analyzer (TFSA), and interpreted with respect to their morphology. According to the molecular orientation and packing order, the residual stress varied from 23.1 to 12.5 MPa, decreased with increasing chain rigidity. The thermal properties of the PI films were investigated using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and thermomechanical analysis (TMA). Their optical properties were measured by ultraviolet-visible spectrophotometer (UV-vis), and spectrophotometry. The properties of PI films were found to be strongly dependent upon the morphological structure. However, trade-offs between residual stress and optical properties were identified.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.5
• /
• pp.75-82
• /
• 2010

To study the combustion characteristics of forest fuel by fire intensity, the experiment of combustion characteristics on Pinus Densiflora living leaves, which is the weakest species to the forest fire, was delivered, using variables of heat flux(25 kW/$m^2$, 50 kW/$m^2$, 75 kW/$m^2$). With the equipment of Cone calorimeter, the characteristics of ignition, heat, smoke release, CO and $CO_2$ release, and mass loss were analyzed. Pinus Densiflora living leaves containing moisture of 60.66% were not ignited at the heat flux of variables 25 kW/$m^2$, 50 kW/$m^2$, 75 kW/$m^2$. In proportion to the heat flux value, heat release amount and heat release rate reached maximum value rapidly: higher variables came to the maximum by the half rapidity and the maximum value were twice higher than the former lower variables respectively. As for the smoke release, the less heat flux the variable had, the more smoke release it had, due to incomplete combustion. The release amount of CO and $CO_2$ had more maximum value as the heat flux increased and more radiant heat meaned more carbon oxide. When the forest fire breaks out, therefore, a great amount of CO and $CO_2$ will be released by Pinus Densiflora.

• Journal of Conservation Science
• /
• v.33 no.6
• /
• pp.467-483
• /
• 2017

In this study, the degradation properties by temperature stress of $Araldite^{(R)}$ rapid-curing epoxy resin used for inorganic cultural heritages, was identified. The tensile and tensile shear strength of durability decreased for 12,624 hours at temperatures of $40{\sim}60^{\circ}C$. In terms of stability of external stress and temperature, the slow-curing epoxy was superior to the rapid-curing epoxy, and cultural heritage conservation plans should therefore consider the strength and stress properties of restoration materials. Color differences increased for 12,624 hours at temperatures of $40{\sim}60^{\circ}C$, and glossiness decreased. Both color and gloss stability were weak, which necessitates the improvement of optical properties. Thermal properties (weight loss, decomposition temperature, and glass transition temperature) of adhesives are linked to mechanical properties. Interfacial properties of the adherend and water vapor transmission rates of adhesives are linked to performance variation. For porous media (ceramics, brick, and stone), isothermal and isohumid environments are important. For outdoor artifacts on display in museums, changes in physical properties by exposure to varying environmental conditions need to be minimized. These results can be used as baseline data in the study of the degradation velocity and lifetime prediction of rapid-curing epoxy resin for the restoration of cultural heritages.

• Elastomers and Composites
• /
• v.43 no.4
• /
• pp.271-280
• /
• 2008

Aromatic polyhydroxyamides (PHAs) having bulky groups and ether linkages in the polymer main chain were synthesized by the low temperature solution polycondensation reaction. FT-IR, $^{1}H-NMR$, DSC, and TGA were used to study the properties of these polymers. The PHAs were converted into polybenzoxazoles (PBOs) by a thermal cyclization reaction, and endothermic peaks were observed in the range of $220{\sim}400^{\circ}C$. The introduction of the ether and bulky groups in the main chain improved the solubility of the PHAs in aprotic solvents such as DMSO and DMF, but the PBOs were nearly insoluble in common solvents. All the PBOs, except for PBO 5 with 2,6-dimethylphenoxy pendant and 2,3-dihydroxyquinoxaline ring, and PBO 6 with 2,6-dimethylphenoxy pendant and 2,3-dihydroxyquinoxaline ring, exhibited $T_g's$ in the range from 149 to $217^{\circ}C$ by DSC. The thermogravimetric analyses indicated that most of the PBOs were thermally stable up to $400^{\circ}C$ in nitrogen. Maximum weight loss temperatures of PHA 5 and PBO 5 with 2,6-dimethylphenoxy pendant and 2,3-dihydroxyquinoxaline ring were $707^{\circ}C$ and $683^{\circ}C$, respectively, which were the hightest temperatures among the corresponding copolymers. The PBOs in nitrogen exhibited relatively high char yields in the range of $63{\sim}70%$ at $900^{\circ}C$.

• Ecology and Resilient Infrastructure
• /
• v.4 no.4
• /
• pp.187-192
• /
• 2017

This study evaluated the reduction performance of ambient temperature and the amount of evaporation that takes place depends on the temperature difference of paving blocks which are used in the sidewalk, roadway, parking lot, park, plaza, and etc. The water-retentive block of the LID (Low Impact Development) practice was compared with the conventional concrete block. For the quantitative performance evaluation, experiments were performed in a climatic environment chamber capable of controlling the climatic environment (solar radiation, temperature, humidity, rainfall, and snowfall). The method for performance evaluation was proposed using temperature, humidity, and ambient air of paving blocks which changes according to the solar radiation and the wind speed after the rainfall. As a result, the evaporation amount of the water-retentive block was 2.6 times higher than that of the concrete block, the surface temperature of water-retentive block was $10^{\circ}C$ lower than the concrete block, and the air temperature of water-retentive block was $4.6^{\circ}C$ lower than the concrete block. Therefore, it is analyzed that the water-retentive block with a large amount of evaporation is more effective in reducing the urban heat island phenomenon as compared with the concrete block.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.2
• /
• pp.117-124
• /
• 2023

X-ray diffraction analysis, X-ray fluorescence analysis, thermal differential and thermos gravimetric analysis, cation exchange capacity analysis, and Cesium (Cs), Strontium (Sr) adsorption experiments were performed to investigate the physical and chemical properties of natural zeolite from Guryongpo in Korea. As a result of X-ray diffraction analysis, minerals such as mordenite, heulandite, clinoptilolite, and illite are contained, and as a result of X-ray fluorescence analysis, elements such as SiO₂, Al₂O₃, CaO, K₂O, MgO, Fe₂O₃ and Na₂O are contained, and the cation exchange capacity was 148.6 meq/100 g. As a result of thermal differential and thermos gravimetric analysis, it was confirmed that the thermal stability was excellent up to 600 ℃. As a result of the adsorption equilibrium experiment over time, the equilibrium was reached within 30 min. for Cesium (Cs) and within 8 hr. for Strontium (Sr), and the adsorption rates of Cesium (Cs) and Strontium (Sr) were 80% and 18%, respectively. As a result of the single-component isothermal adsorption experiment, in conformed to the Langmuir model, and the maximum Cesium (Cs) adsorption amount was 131.5 mg/g, which was high, while the Strontium (Sr) maximum adsorption amount was 29.5 mg/g, which was low. In the case of the natural zeolite used in this study, the content of minerals including 8-rings such as clinoptilolite, heulandite, and mordenite is high, showing high selectivity for Cesium (Cs).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.2
• /
• pp.47-60
• /
• 1975

For the calculation of population parameter and estimation of recruitment of a fish population, an application of multiple regression method was used with some statistical inferences. Then, the differences between the calculated values and the true parameters were discussed. In addition, this method criticized by applying it to the statistical data of a population of bigeye tuna, Thunnus obesus of the Indian Ocean. The method was also applied to the available data of a population of Pacific saury, Cololabis saira, to estimate its recuitments. A stock at t year and t+1 year is, $N_{0,\;t+1}=N_{0,\;t}(1-m_t)-C_t+R_{t+1}$ where $N_0$ is the initial number of fish in a given year; C, number o: fish caught; R, number of recruitment; and M, rate of natural mortality. The foregoing equation is $$\phi_{t+1}=\frac{(1-\varrho^{-z}{t+1})Z_t}{(1-\varrho^{-z}t)Z_{t+1}}-\frac{1-\varrho^{-z}t+1}{Z_{t+1}}\phi_t-a'\frac{1-\varrho^{-z}t+1}{Z_{t+1}}C_t+a'\frac{1-\varrho^{-z}t+1}{Z_{t+1}}R_{t+1}......(1)$$ where $\phi$ is CPUE; a', CPUE $(\phi)$ to average stock $(\bar{N})$ in number; Z, total mortality coefficient; and M, natural mortality coefficient. In the equation (1) , the term $(1-\varrho^{-z}t+1)/Z_{t+1}$s almost constant to the variation of effort (X) there fore coefficients $\phi$ and $C_t$, can be calculated, when R is a constant, by applying the method of multiple regression, where $\phi_{t+1}$ is a dependent variable; $\phi_t$ and $C_t$ are independent variables. The values of Mand a' are calculated from the coefficients of $\phi_t$ and $C_t$; and total mortality coefficient (Z), where Z is a'X+M. By substituting M, a', $Z_t$, and $Z_{t+1}$ to the equation (1) recruitment $(R_{t+1})$ can be calculated. In this precess $\phi$ can be substituted by index of stock in number (N'). This operational procedures of the method of multiple regression can be applicable to the data which satisfy the above assumptions, even though the data were collected from any chosen year with similar recruitments, though it were not collected from the consecutive years. Under the condition of varying effort the data with such variation can be treated effectively by this method. The calculated values of M and a' include some deviation from the population parameters. Therefore, the estimated recruitment (R) is a relative value instead of all absolute one. This method of multiple regression is also applicable to the stock density and yield in weight instead of in number. For the data of the bigeye tuna of the Indian Ocean, the values of estimated recruitment (R) calculated from the parameter which is obtained by the present multiple regression method is proportional with an identical fluctuation pattern to the values of those derived from the parameters M and a', which were calculated by Suda (1970) for the same data. Estimated recruitments of Pacific saury of the eastern coast of Korea were calculated by the present multiple regression method. Not only spring recruitment $(1965\~1974)$ but also fall recruitment $(1964\~1973)$ was found to fluctuate in accordance with the fluctuations of stock densities (CPUE) of the same spring and fall, respectively.