• Proceedings of the Korean Fiber Society Conference
• /
• 1996.04a
• /
• pp.226-228
• /
• 1996

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.381-388
• /
• 2002

The properties of polyurethane (PU) nanocomposites with organoclay have been compared in terms of their thermo-mechanical properties, morphology, and gas permeability. Hexadecylamine-montmorillonite ($C_{16}$-MMT) was used as an organoclay to make PU hybrid films. The properties were investigated as a function of organoclay content (1-4 wt%) in the PU matrix. Transmission electron microscopy (TEM) photographs showed that most clay layers were dispersed homogeneously into the matrix polymer in nano-scale, although some particles of clay were agglomerated. We also found that the addition of only a small amount of organoclay was enough to improve the thermal stabilities and mechanical properties of PU hybrid films while gas permeability was reduced. Even at low organoclay content (<5 wt%), the PU nanocomposite showed much better thermo-mechanical properties, and lower gas permeability than pure PU.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.04a
• /
• pp.149-152
• /
• 2001

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.11a
• /
• pp.162-162
• /
• 2002

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.339-346
• /
• 1997

Liquid crystalline polyurethanes were prepared from 1,4-bis(6-hydroxyhexoxy)benzene (BHB6) and 2,5-tolylene diisocyanate (2,5-TDI) solution polymerization in dimethylformamide produced intrinsic viscosities in the range 0.26 and $0.42d{\ell}/g$. The polyurethanes were investigated by DSC, Polarizing microscopy, X-ray, $^1H$-NMR and IR spectroscopy. Polyurethanes of two different molecular weights were studied in detail and these will be referred to as low molecular weight and high molecular weight. Polyurethane 2,5-TDI/BHB6 with $[{\eta}]=0.26d{\ell}/g$ prepared from BHB6 and 2,5-TDI, exhibited monotropic liquid crystallinity, although these polyurethanes contained no mesogenic core unit. For example, LCPU-L(low molecular weight) exhibited $T_{I-LC}$ of $122^{\circ}C$ $T_{LC-K}$ $89^{\circ}C$.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.107.2-107
• /
• 2002

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.213-213
• /
• 2003

저온소성 가능하며 저 융점유리인 고 투과율의 Pb-free 조성으로서 PDP(Plasma Display panel)의 투명유전체에 응용하고자 P$_2$O$_{5}$-ZnO-RO 계인 인산염 유리의 열적, 광학적성질을 연구하였다. 이 삼원계인 인산염유리계를 PDP의 투명 유전체에 응용하기에는 열적특성에서 문제점이 제기되어, (30-50)P$_2$O$_{5}$ - (20-50)ZnO - (15-45) RO (mol%)계에 유리망목형성제인 A1$_2$O$_3$, SiO$_2$, B$_2$O$_3$등을 첨가하여 열적성질 및 소성후 투광성 등을 조사하였다. 열적특성은 DTA와 TGA를 이용하여 유리전이점(Tg) 및 선팽 창계수(CTE)와 연하점(Ts) 을 측정하였으며, 투광성은 500-58$0^{\circ}C$에서 1시간동안 소성하여 UV-visible spectrometer을 이용하였다 그 결과로, 380-46$0^{\circ}C$의 Tg와 8-$10^{-6}$K의 CTE 및 70-80%의 광투과율을 나타내었다. 이러한 결과는 P$_2$O$_{5}$-ZnO-RO계는 PDP의 투명유전체에 적용하기에는 상당히 높거나 낮은 Tg를 형성하였지만 유리형성제를 수 mol%을 첨가함으로써 적절한 Tg점과 높은 투과율을 얻을 수 있었다.수 있었다.

• Economic and Environmental Geology
• /
• v.18 no.3
• /
• pp.253-261
• /
• 1985

Detailed chemical compositions of thirteen montmorillonites and their thermal behaviour by differential thermal and thermogravimetric analysis have been studied. Comparison of structural formulae with experimental results by thermal analysis gave evidence of that both substitutions of Fe for Al in octahedral and Al for Si in tetrahedral positions appear to affect dehydroxylation temperature, which is valid for the present samples. Further detailed study of this topic using well-known samples which have various degree of substitution will be justified.

• Elastomers and Composites
• /
• v.48 no.4
• /
• pp.276-281
• /
• 2013

Polyester type polyurethane foam modified with acrylic polyol was prepared by quasi prepolymer method. Thermal and dynamic mechanical properties of polyurethane foam were analysed by thermal gravimetric analysis(TGA) and dynamic mechanical analysis(DMA). Also, glass transition temperature was measured by differential scanning calorimeter(DSC). As acrylic polyol contents were increased, thermal stability measured by TGA was slightly decreased. Storage modulus was increased and tan delta was decreased with increasing of acrylic polyol contents.

• Proceedings of the Korean Fiber Society Conference
• /
• 1999.10a
• /
• pp.517-520
• /
• 1999

개질제로 1,4-cyclohexandimethanol과 dimethyl isophthalate를 사용하여, PET 규칙적인 분자쇄에 분자유동성이 적은 cyclohexane 구조와 벤젠 unit에 iso형태인 "kink"구조를 도입하여, 개질제의 함량에 따른 공중합물의 열적성질과 그에 따른 morphology를 관찰하였다.