• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.196.1-196.1
• /
• 2011

In this study, a test bed was constructed in order to evaluate thermal efficiency of the energy pile which carries out combined roles of a structural foundation and of a heat exchanger. The energy pile in this study is designed as a large-diameter drilled shaft equipped with the heat exchange pipes which configures a W-shape and an S-shape. The drilled shaft reached to the depth of 60 m whilst the heat exchange pipes were installed to about 30 m deep from the ground surface. The W-shaped and S-shaped heat exchange pipes were installed in the opposite sections of the same drilled shaft. In-situ thermal response tests were performed for both the shapes of heat exchange pipes. To avoid underestimating the thermal performance due to hydration heat of concrete inside the drilled shaft, the in-situ thermal response tests for the energy pile were performed after four weeks since the installation of the energy pile.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.369-376
• /
• 1998

원자로 압력용기는 원자력발전소의 일차 압력경계를 구성하는 핵심 부품으로 이의 건전성은 원전의 안전성과 수명관리에 결정적인 영향을 미친다. 탄소강으로 구성된 압력용기는 노심에 근접하게 위치하여 운전중 계속되는 고속중성자 조사로 인하여 인성이 감소한다. 운전중 비상노심 냉각수가 주입되어 압력용기가 급격하게 냉각되면서 압력이 높게 유지되거나 재가압이 되는 가압열충격 현상이 발생하는 경우 조사취화된 압력용기가 적절한 안전여유를 가지지 못할 수도 있다. USNRC에서는 이에 대한 종합적인 연구결과를 바탕으로 가압열충격 규정을 제정하여 가압열충격 기준온도(RT$_{PTS}$)의 계산 방법과 심사기준온도를 제시하였다. 가압열충격 심사기준온도의 결정근거가 기술되어 있는 SECY 82-465에 의하면 축방향 용접부에 대한 위험도를 평가하여 270℉를 심사기준온도로 정하고 원주방향 용접부에 대해서는 30℉를 더하여 300℉를 심사기준온도로 제시하였다. 이 연구에서는 이렇게 제정된 원주방향 용접부에 대한 심사기준온도의 적정성을 평가하기 위하여 균열방향에 따른 가압열충격 위험도를 VISA-II 코드로 평가하였다. 우선 가압열충격 기준온도 제정 시 사용된 방법과 결과들을 검토하고 NRC의 계산결과를 재현하였다. 이를 바탕으로 원주방향 용접부에 대한 위험도를 평가한 결과 균열방향의 차이를 고려하기 위해 적용된 기술적 여유도인 30℉는 과도한 보수성을 내포하고 있음을 알 수 있었다. 원주방향 용접부가 축방향 용접부와 동일한 수준의 가압열충격 위험도를 가지기 위한 심사기준온도 차이는 50℉ 이상인 것으로 평가되었다.을 수 있었다.ngineering because this field has large uncertainties on predicting the effect of earthquake on structures. This paper is based on the presented paper at the Bertero Symposium held in January 31an4 February 1 at Berkeley, California, USA which was entitled "Needs to Evaluate Real Seismic Performance of Buildings-Lessons from 1995 Hyogoken-Nambu Earthquake-". The lessons for buildings from the damage due to the Hyogoken-Nambu Earthquake are necessity to develop more rational seismic design codes based upon a performance-based design concept, and to evaluate seismic performance of existing buildings. In my keynote lecture at the Korean Association for Computational Structural Engineering, the history of seismic design and use of structural analysis in Japan, the lessons for buildings from

• Analytical Science and Technology
• /
• v.23 no.1
• /
• pp.24-35
• /
• 2010

To learn more about the calibration properties of reduced sulfur compounds (RSCs) by the combination of gas chromatography(GC)-pulsed flame photometric detector (PFPD) and thermal desorption method, a series of calibration experiments were conducted on the basis of both internal and external calibration approaches. For these experiments, gaseous standards of 4 RSCs ($H_2S$, $CH_3SH$, DMS, and DMDS) were prepared at two different concentration levels of both low (10, 20, 50,and 100 ppb) and high ranges (100, 200, 500, and 1000 ppb) along with $CS_2$ as an internal standard. First, the external calibration results were compared between fixed standard volume (FSV) and fixed standard concentration (FSC) method. Secondly, FSV-based calibration results were compared between external and internal calibration results. As FSV method suffers from sensitivity variations less significantly than FSC, the former is recommended to maintain the consistency in GC-TD sensitivity for RSC analysis. In addition, when the calibration data were examined in terms of RSE between external and internal calibration data, the results were not consistent enough to show improvements in internal method. Hence, diverse efforts are desirable to optimize the reproducibility in terms of GC-TD sensitivity for RSC analysis.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.12
• /
• pp.125-134
• /
• 2022

The Global Expansion Roadmap published by the International Space Exploration Coordination Group, which is organized by space agencies around the world, presents future lunar exploration guidance and stresses a lunar habitat program to utilize lunar resources. The Moon attracts attention as an outpost for deep space exploration. Simulating lunar surface environments is required to evaluate the performances of various equipment for future lunar surface missions. In this paper, an experimental study was conducted to simulate high vacuum pressure and cryogenic temperature of the permanent shadow regions in the lunar south pole, which is a promising candidate for landing and outpost construction. The establishment of an efficient dirty thermal vacuum chamber (DTVC) operation process has never been presented. One-dimensional ground cooling tests were conducted with various vacuum pressures with the Korean Lunar Simulant type-1 (KLS-1) in DTVC. The most advantageous vacuum pressure was found to be 30-80 mbar, considering the cooling efficiency and equipment stability. However, peripheral cooling is also required to simulate a cryogenic for not sublimating ice in a high vacuum pressure. In this study, an efficient peripheral cooling operation process was proposed by applying the frost ratio concept.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.162-162
• /
• 2018

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.05a
• /
• pp.31-36
• /
• 1998

가압유동층 복합발전(Pressurized Fluidized Bed Combustion Combined Cycle 또는 PFBC-CC)은 고효율 및 공해물질 배출이 적은 석탄이용 차세대 발전기술이다. 석탄을 연소하면서 발생되는 열은 스팀으로 회수하여 스팀터빈을 구동하고, 고온, 고압의 연소가스로 가스터빈을 구동하여 복합 발전함으로서 효율을 42- 45%까지 얻을 수 있으며, 유동층연소의 장점인 연소중 탈황과 낮은 질소산화물 배출특성으로 환경친화적이며 경제성이 우수한 청정석탄 이용기술이다. (중략)

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.43-43
• /
• 2002

인공위성은 일반적으로 추력기(thruster)에서 플룸(plume)을 거의 진공에 가까운 외부환경으로 사출하여 자세를 제어한다. 이 때, 사출되는 플룸에 의해 위성체의 고도에 영향을 줄 수 있는 교란추력/교란토크, 열하중(thermol loading), 정밀계측장비에 영향을 주는 오염(contamination) 등, 여러 부정적인 효과들이 야기될 수 있으며, 이들 효과들은 결론적으로 위성체의 수명을 단축하기 때문에 이들에 대한 정확한 예측은 위성체 설계단계에서 매우 중요하다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.131-132
• /
• 2014

In this study, an experiment was carried out using graphite, conductive nickel powder, copper bar, carbon fiber for evaluate the exothermic properties and heating reproducibility of the cement mortar containing conductive material. As a result, the conductive materials that interfere with heating reproducibility are present, and the optimal conductive materials exist in each input voltage.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.114-115
• /
• 2002

다성분계 세라믹스에 대하여 초미립 및 나노 분말을 제조하기 위해 공침법, 비정질 citrate법, 무기 금속염을 이용한 sol-gel법, 분무 열분해법 등과 같이 비교적 단순한 공정이면서 입도 분포가 좁고 재현성이 우수한 구형의 초미립 또는 나노 분말의 제조에 적합한 방법들이 많이 연구되고있다[1-3]. 분무 열분해법은 출발물질로 용액을 사용하고 미세한 액적(droplet)을 초음파 분무 후 열분해 하여 분말을 합성하는 방법으로, 입자의 조성이 균질하고 구형의 형상을 갖는 우수한 결정상을 얻을 수 있다. (중략)

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2019.09a
• /
• pp.145-145
• /
• 2019