• Journal of the Korean Chemical Society
• /
• v.51 no.2
• /
• pp.129-135
• /
• 2007

The critical micelle concentrations (CMC) and the counter ion binding constants (B) in a micellar state of the mixed surfactant systems of Tetradecyltrimethylammonium bromide (TTAB) with Polyoxyethylene(23) lauryl ether (Brij 35) in water were determined as a function of α1 (the overall mole fraction of TTAB) by the use of electric conductivity method and surface tensiometer method from 15 oC to 35 oC. Values of thermodynamic parameters (ΔGom, ΔHom, and ΔSom) for the micellization of TTAB/Brij 35 mixtures were calculated and analyzed from the temperature dependence of CMC values. The results say that the measured values of ΔGom are all negative at the whole measured condition but the values of ΔSom and ΔHom are positive or negative, depending on the measured temperature and α1.

• Journal of the Korean Chemical Society
• /
• v.45 no.1
• /
• pp.7-13
• /
• 2001

The interaction of benzenesulfonate anion and its derivatives ($C_6H_5SO_3^-, p-$CH_3C_6H_4SO_3^-, and $p-C_2H_5C_6H_4SO_3^-$) with the micellar system of cationic surfactant TTAB(tetradecyltrimethylammonium bromide) was studied by UV/Vis spectrophotometric method. The solubilization constants($K_s$) of benzenesulfonate anions into the micellar phase of this surfactant have been measured with the change of temperature. The effects of additives(n-pentanol and NaBr) on the solubilization of benzenesulfonate anions by this surfactant system have been also measured. There was a great decrease on the values of $K_s$ and CMC simultaneously with these additives so that the measured values of ln$K_s$ were linear relationships with the values of lnCMC. For the thermodynamic study, various thermodynamic parameters(${\Delta}G^0_s$, ${\Delta}H^0_s$ and ${\Delta}S^0_s$) have been calculated and analyzed from the dependence of Ks values on temperature.

• Journal of the Korean Chemical Society
• /
• v.48 no.3
• /
• pp.236-242
• /
• 2004

The critical micelle concentration (CMC) and the counterion binding constant (B) in a mixed micellar state of the Dodecylpyridinium chloride (DPC) with the Cetyldimethylethylammonium bromide (CDEAB) at 25$^{\circ}C$ in aqueous solutions of n-butanol were determined as a function of ${\alpha}_1$ (the overall mole fraction of DPC) by the use of electric conductivity method. Various thermodynamic parameters (($X_i,\;{\gamma}_i,\;C_i,\;a^M_i,\;{\beta},\;and {\Delta}H_{mix})$were calculated by means of the equations derived from the nonideal mixed micellar model. The effect of n-butanol on the mixed micellization of the DPC/CDEAB mixtures has been also studied by analyzing the measured and calculated thermodynamic parameters (CMC, B 및 $;{\Delta}G_o\;^m$).

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.4
• /
• pp.315-321
• /
• 2012

In this study, a sequential multiscale homogenization method to characterize the effective thermal conductivity of nano particulate polymer nanocomposites is proposed through a molecular dynamics(MD) simulations and a finite element-based homogenization method. The thermal conductivity of the nanocomposites embedding different-sized nanoparticles at a fixed volume fraction of 5.8% are obtained from MD simulations. Due to the Kapitza thermal resistance, the thermal conductivity of the nanocomposites decreases as the size of the embedded nanoparticle decreases. In order to describe the nanoparticle size effect using the homogenization method with accuracy, the Kapitza interface in which the temperature discontinuity condition appears and the effective interphase zone formed by highly densified matrix polymer are modeled as independent phases that constitutes the nanocomposites microstructure, thus, the overall nanocomposites domain is modeled as a four-phase structure consists of the nanoparticle, Kapitza interface, effective interphase, and polymer matrix. The thermal conductivity of the effective interphase is inversely predicted from the thermal conductivity of the nanocomposites through the multiscale homogenization method, then, exponentially fitted to a function of the particle radius. Using the multiscale homogenization method, the thermal conductivities of the nanocomposites at various particle radii and volume fractions are obtained, and parametric studies are conducted to examine the effect of the effective interphase on the overall thermal conductivity of the nanocomposites.

• Journal of the Korean Geographical Society
• /
• v.34 no.5
• /
• pp.473-491
• /
• 1999

세균성 이질은 국내 제1종 법정 전염병으로 분류되어 관리되고 있는 질환으로서 1998년 이후 그 발병 사례가 급속히 증가하고 있다. 본 연구는 1999년 3월 부산시 사상구에서 집단 발병한 세균성 이질을 대상으로 하여, 각 환자들의 발병 시점과 장소의 분포패턴에 대한 지리학적 고찰을 목적으로 한다. 환자분포의 특징적 공간패턴과 그들의 시계열적 확산 양상 등을 탐색하기 위한 방법론은 보건지리학과 지도학 및 공간통계학에 기반을 둔 공간분석기법을 중심으로 설정하였다. 분석자료는 해당 지역의 수치지형도, 지적도, 인구 센서스 자료를 포함한 GIS 데이터베이스로 구축되었다. 인구분포를 감안한 밀도구분도를 바탕으로 개별환자의 위치자료와 동 단위로 집계된 자료를 자료의 형태에 따라 분석기법을 달리하였으며, 환자 발생 밀도, 상대적 위험지수 등을 지도화하여 역학자료의 시각적 통계적 분석을 수행하였다. 환자분포의 공간적 중심위치와 분산의 변화 등 기술적 통계분석과 함께 제1차 공간속성을 커널추정법으로 찾아보았다. 이와 더불어 ‘공간적 의존성’과 관련된 제2차 공간속성은 K-함수와 시뮬레이션을 통해 분석하여 군집성 등이 통계적으로 확인되었다. 본 연구를 통해 역학조사시 GIS의 활용사례가 제시되었으며, 모집단 인구를 고려한 확률지도 작성 기법과 다양한 데이터 가시화 방법, 그리고 시계열별 발생 환자들의 지리적 변이를 분석 하는데 따르는 문제들이 논의되었다.

• The Korean Journal of Applied Statistics
• /
• v.6 no.2
• /
• pp.191-200
• /
• 1993

This study introduced speical characteristics of an epidemiologic study on blood pressure and compared several statistical methods for evaluating the tracking phenomenon of blood pressure for Korean children. While correlation coefficients adjusted for measurement error are commonly used for the evaluation of tracking, it is hard to interpretate the results when correlation functions for lag-difference are not monotonous. McMahan defined a tracking as maintenance of relative rank over time and calculated tracking index usng growth curve model. The tracking index in McMahan's model is complicate to calculate, and it is hard to determine the degree of growth curve parameter. Blomqvist showed the relationship between the rate of change and the initial value. This concept could be extended for the evaluation of tracking. However, it is not so easy to interpretate the estimates in his model when those are non-positive.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.1-15
• /
• 1992

A Practical and easily applicable methods for the numerical analysis and the optimum design of continuous and horizontally curved two-way slab systems with twelve possible edge conditions are presented. The proposed method for the numerical structural analysis is based on the use of design moment coefficients which are derived from the elastic theory of thin curved plates. The optimum values are selected from within the feasible region in the design space defined by the limit state requirements. The sequential linear programming is introduced as an analytical method of nonlinear optimization. The optimum design variables, including a effective depth and transformed steel ratios per unit width of middle and column strips of slabs, are then determined.

• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.333-340
• /
• 1999

A numerical study of turbulent condensing vapor jet submerged in subcooled liquids has been conducted. A physical model of the process is presented employing the locally homogeneous flow approximation of two phase flow in conjunction with a $\kappa$-$\varepsilon$-g model of turbulence properties. In this model the turbulence is represented by differential equations for its kinetic energy and dissipation. A differential equation for the concentration fluctuations is solved and a clipped normal probability distribution function is proposed for the mixture fraction. Effects of steam mass flux, pool temperature and nozzle internal diameter on the condensing vapor jet are also analyzed. The model is evaluated using existing data for turbulent condensing vapor jets. The agreement between the predictions and the available experimental data is good.

• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.474-481
• /
• 2005

In this study, modeling and optimization work were performed to obtain nearly pure anhydrous ethanol from aqueous ethanol mixtures using benzene as an entrainer. NRTL liquid activity coefficient model was adopted for phase equilibrium calculations and PRO/II with PROVISION 6.01, a commercial process simulator, was used to simulate the azeotropic distillation process. We used the total reboiler heat duties as an objective function and the concentration of ethanol at concentrator top as a manipulated variable. As a result, 76 mole percent of ethanol at concentrator top gave an optimum value which minimized the total reboiler heat duties of three distillation columns.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.23-28
• /
• 2018

We derive a gap of specific heat discontinuity of superconducting crystals theoretically at the critical temperature $T_{CH}$ as an explicit function of applied magnetic field H by using the thermodynamic relations for Gibbs free energy and the linear model for the critical magnetic field $H_{CT}$. The derived a gap of specific heat discontinuity is compared with experimental results by J. Kacmarcik et al. for superconducting MgCNi3 crystal. Our specific heat gap function well explain the jump up phenomena of the superconducting crystals.