• Tunnel and Underground Space
• /
• v.25 no.2
• /
• pp.115-124
• /
• 2015

Thermal energy storage (TES) is a technology that stores surplus thermal energy at high or low temperatures for later use when the customer needs it, not just when it is available. TES systems can help balance energy demand and supply and thus improve the overall efficiency of energy systems. Furthermore, the conversion and storage of intermittent renewable resources in the form of thermal energy can help increase the share of renewable resources in the energy mix which refers to the distribution of energy consumption from different sources, and to achieve this, it is essential to combine renewable resources with TES systems. Underground TES using rock caverns, known as cavern thermal energy storage (CTES), is a viable option for large-scale, long-term TES utilization although its applications are limited because of the high construction costs. Furthermore, the heat loss in CTES can significantly be reduced due to the heating of the surrounding rock occurred during long-term TES, which is a distinctive advantage over aboveground TES, in which the heat loss to the surroundings is significantly influenced by climate conditions. In this paper, we introduced important factors that should be considered in the shape and multiple layout design of TES caverns, and proposed guidelines for storage space design.

• Tunnel and Underground Space
• /
• v.23 no.1
• /
• pp.78-85
• /
• 2013

A primary objective in creating a stratified thermal storage is to maintain the thermodynamic quality of energy, so thermally stratified energy can be extracted at temperatures required for target activities. The separation of the thermal energy in heat stores to layers with different temperatures, i.e., the thermal stratification is a key factor in achieving this objective. This paper introduces different methods that have been proposed to characterize the thermal stratification in heat stores. Specifically, this paper focuses on the methods that can be used to determine the ability of heat stores to promote and maintain stratification during the process of charging, storing and discharging. In addition, based on methods using thermal stratification indices, the degrees of stratification of stored energy in Lyckebo rock cavern in Sweden were compared and the applicability of the methods was investigated.

• Tunnel and Underground Space
• /
• v.23 no.3
• /
• pp.241-259
• /
• 2013

A packed bed thermal energy storage (TES) consisting of solid storage medium of rock or concrete through which the heat transfer fluid is circulated is considered as an attractive alternative for high temperature sensible heat storage, because of the economical viability and chemical stability of storage medium and the simplicity of operation. This study introduces the technologies of packed bed thermal energy storage, and presents a numerical model to analyze the thermal energy balance and the performance efficiency of the storage system. In this model, one dimensional transient heat transfer problem in the storage tank is solved using finite difference method, and temperature distribution in a storage tank and thermal energy loss from the tank wall can be calculated during the repeated thermal charging and discharging modes. In this study, a high temperature thermal energy storage connected with AA-CAES (advanced adiabatic compressed air energy storage) was modeled and analyzed for the temperature and the energy balance in the storage tank. Rock cavern type TES and above-ground type TES were both simulated and their results were compared in terms of the discharging efficiency and heat loss ratio.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.450.1-450.1
• /
• 2014

열에너지를 전기에너지로 변환하거나 또는 전기에너지를 열에너지로 직접 변환하는 열전 변환 기술이 주목받고 있다. 열전 변환 효율은 성능지수($ZT={\alpha}^2{\sigma}T{\kappa}^{-1}$)로 평가되며, 여기서 ${\alpha}$, ${\sigma}$, ${\kappa}$, T는 각각 열전재료의 제벡계수, 전기전도도, 열전도도 및 절대온도이다. 따라서 우수한 열전재료는 높은 제벡계수와 전기전도도 그리고 낮은 열전도도를 가져야 한다. Bismuth telluride는 상온영역에서 성능지수가 높은 재료로서, $Bi_2Te_3$에 $Bi_2Se_3$와 고용체를 형성하면 원자의 치환으로 포논산란에 의해 열전도도가 낮아지고, 도핑으로 전기적 특성을 조절하여 성능지수를 향상시킬 수 있다. 본 연구에서는 진공밀폐 용해법으로 $Bi_2Te_{2.85}Se_{0.15}:I_m$ (m=0.0~0.045) 고용체를 합성하여 상분석을 실시하고, 전자 이동특성 및 열전 특성을 평가하였다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.14 no.1
• /
• pp.53-60
• /
• 2003

Performance evaluation on thermal transport of a plate heat exchanger has been carried out. The $\varepsilon$-Ntu method is employed to evaluate the performance of a brazed type of plate heat exchanger. This problem is of particular interest in the design of a plate heat exchanger. The characteristics of heat transfer as well as pressure drop are studied in the wide range of Reynolds numbers in the cold side while that of hot side is fixed at 620. f-factor correlation in a plate heat exchanger is obtained from the pressure drop data. It is also found that the effectiveness of the plate heat exchanger is increased as the Ntu is increased.

• Journal of the korean Society of Automotive Engineers
• /
• v.16 no.4
• /
• pp.51-61
• /
• 1994

기관의 출력성능은 기관으로 공급되는 연료공기의 혼합기량에 따라서 크게 달라진다. 이것은 기관의 출력성능은 기관으로 공급되는 흡기 용량에 따라서 변화하기 때문이다. 고출력을 얻기 위하여는 동일한 조건의 경우 흡기량을 증가시켜 기관 실린더 내에서 많은 연소 열에너지를 생성하는 것이 필요하다. 이러한 관점에서 기관의 체적 효율(volumetric efficiency)을 증가시킬 목적으로 여러가지 흡기 계통의 개서을 도모하고 있으나 흡기 용량을 증가시키는 방법의 하나는 과급기(supercharger)를 이용하는 과급 방식이다. 이와같은 과급방식은 기관의 출력성능의 향상을 가져오지만 기관 내부의 노크(knock), 연소 압력 및 열부하의 증가, 연비 문제등에 관한 여러가지 문제점이 제기되고 있다. 여기서는 과급에 적용되는 과급기의 종류와 과급 성능 특성 등에 대하여 살펴보고 과급기관의 성능에 대하여 다루기로 한다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.571-580
• /
• 2020

In this study, an experimental study on storage media for thermal energy storage system was conducted. For thermal energy storage medium, concrete has excellent thermal and mechanical properties and also has various advantages due to its low cost. In addition, the ultra-high strength concrete reinforced by steel fibers exhibits excellent durability against exposure to high temperatures due to its high toughness and high strength characteristics. Moreover, the high thermal conductivity of steel fibers has an advantageous effect on heat storage and heat dissipation. Therefore, to investigate the temperature distribution characteristics of ultra-high-strength concrete, concrete blocks were fabricated and a heating test was performed by applying high-temperature thermal cycles. The heat transfer pipe was buried in the center of the concrete block for heat transfer by heat fluid flow. In order to explore the temperature distribution characteristics according to different shapes of the heat transfer pipe, a round pipe and a longitudinal fin pipe were used. The temperature distribution at the differnent thermal cycles were analyzed, and the thermal energy and the cumulated thermal energy over time were calculated and analyzed for comparison based on test results.

• Tunnel and Underground Space
• /
• v.25 no.2
• /
• pp.155-167
• /
• 2015

The thermal-hydrological-mechanical (T-H-M) behavior of rock mass surrounding a high-temperature cavern thermal energy storage (CTES) operated for a period of 30 years has been investigated by TOUGH2-FLAC3D simulator. As a fundamental study for the development of prediction and control technologies for the environmental change and rock mass behavior associated with CTES, the key concerns were focused on the hydrological-thermal multiphase flow and the consequential mechanical behavior of the surrounding rock mass, where the insulator performance was not taken into account. In the present study, we considered a large-scale cylindrical cavern at shallow depth storing thermal energy of $350^{\circ}C$. The numerical results showed that the dominant heat transfer mechanism was the conduction in rock mass, and the mechanical behavior of rock mass was influenced by thermal factor (heat) more than hydrological factor (pressure). The effective stress redistribution, displacement and surface uplift caused by heating of rock and boiling of ground-water were discussed, and the potential of shear failure was quantitatively examined. Thermal expansion of rock mass led to the ground-surface uplift on the order of a few centimeters and the development of tensile stress above the storage cavern, increasing the potential of shear failure.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.579-582
• /
• 2012

본 논문에서는 쿨튜브를 적용한 식물공장 이중창호와 삼중창호의 열전달 차단성능을 3차원 수치해석을 통해 비교분석하였다. 이중창호 설계변수인 유입구의 개수와 중공층 두께조건에 따라 창호를 통해 식물공장 외부에서 내부로 유입되는 열전달량을 분석하였다. 쿨튜브를 통해 중공층으로 유입되는 공기속도가 이중창호에서는 0.95 m/s, 삼중창호의 경우는 0.50 m/s 이상일 때 창호를 관통하여 외부에서 내부로 유입되는 열에너지가 차단되는 결과를 얻었다. 삼중창호의 경우에 중공층 유입 공기속도를 0.50 m/s 이상으로 증가시킬 경우 오히려 식물공장 내부의 열에너지가 중공층으로 빠져나가 실내온도를 낮추는 효과가 나타났다. 본 연구의 결과를 바탕으로 국내 지역별 기후데이터의 온도조건을 고려한 분석을 추가적으로 진행할 계획이다.

• Tunnel and Underground Space
• /
• v.23 no.2
• /
• pp.150-159
• /
• 2013

It is generally well known that the stratification of thermal energy in heat stores can be improved by increasing the aspect ratio (the height-to-width ratio) of the stores. Accordingly, it will be desirable to apply a high aspect ratio so as to demonstrate the good thermal performance of heat stores. However, as the aspect ratio of a store increases, the height of the store become larger compared to its width, which may be unfavorable for the structural stability of the store. Therefore, to determine an optimum aspect ratio of heat stores, a quantitative mechanical stability assessment should be performed in addition to thermal performance evaluations. In the present study, we numerically investigated the mechanical stability of silo-shaped rock caverns for underground thermal energy storage at different aspect ratios. The applied aspect ratios ranged from 1 to 6 and the mechanical stability was examined based on factor of safety using a shear strength reduction method. The results from the present study showed that the factor of safety of rock caverns tended to decrease with the increase in aspect ratio and the stress ratio of the surrounding rock mass was influential to the stability of the caverns. In addition, the numerical results demonstrated that under the same conditions of rock mass properties and aspect ratio, mechanical stability could be improved by the reduction in cavern size (storage volume), which indicates that one can design high-aspect-ratio rock caverns by dividing a single large cavern into multiple small caverns.