• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.496-523
• /
• 2018

The objective of this study is to evaluate the economic feasibility of two fast pyrolysis and biooil upgrading (FPBU) plants including feed drying, fast pyrolysis by fluidized-bed, biooil recovery, hydro-processing for biooil upgrading, electricity generation, and wastewater treatment. The two FPBU plants are Case 1 of an FPBU plant with steam methane reforming (SMR) for $H_2$ generation (FPBU-HG, 20% yield), and Case 2 of an FPBU with external $H_2$ supply (FPBUEH, 25% yield). The process flow diagrams (PFDs) for the two plants were constructed, and the mass and energy balances were calculated, using a commercial process simulator (ASPEN Plus). A four-level economic potential approach (4-level EP) was used for techno-economic analysis (TEA) under the assumption of sawdust 100 t//d containing 40% water, 30% equity, capital expenditure equal to the equity, $H_2$ price of $1050/ton, and hydrocarbon yield from dried sawdust equal to 20 and 25 % for Case 1 and 2, respectively. TCI (total capital investment), TPC (total production cost), ASR (annual sales revenue), and MFSP (minimum fuel selling price) of Case 1 were $22.2 million, $3.98 million/yr, $4.64 million/yr, and $1.56/l, respectively. Those of Case 2 were $16.1 million, $5.20 million/yr, $5.55 million/yr, and $1.18/l, respectively. Both ROI (return on investment) and PBP (payback period) of Case 1(FPBU-HG) and Case 2(FPBU-EH) were the almost same. If the plant capacity increases into 1,500 t/d for Case 1 and Case 2, ROI would be improved into 15%/yr.

• Applied Chemistry for Engineering
• /
• v.33 no.5
• /
• pp.496-501
• /
• 2022

In this study, an anode material for lithium secondary batteries was manufactured using petroleum-based residual oil, which is a petroleum refining by-product. Among petroleum-based residual oils, pyrolysis fuel oil (PFO), fluidized catalyst cracking-decant oil (FCC-DO), and vacuum residue (VR) were used as carbon precursors. The physicochemical characteristics of petroleum-based residual oil were confirmed through Matrix-assisted laser desorption/ionization Time-of-Flight (MALDI-TOF) and elemental analysis (EA), and the structural characteristics of anode materials manufactured from residual oil were evaluated using X-ray crystallography (XRD) and Raman spectroscopic techniques. VR was found to contain a wide range of molecular weight distributions and large amounts of impurities compared to PFO and FCC-DO, and PFO and FCC-DO exhibited almost similar physicochemical characteristics. From the XRD analysis results, carbonized PFO and FCC-DO showed similar d₀₀₂ values. However, it was confirmed that FCC-DO had a more developed layered structure than PFO in Lc (Length of a and c axes in the crystal system) and La values. In addition, FCC-DO showed the best cycle characteristics in electrochemical characteristics evaluation. According to the physicochemical and electrochemical results of the petroleum-based residual oil, FCC-DO is a better carbon precursor for a lithium secondary battery than PFO and VR.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.42-49
• /
• 2017

To replace phthalate plasticizer for PVC, acetylated monoglyceride (AMG) plasticizers were prepared from plant oil and their plasticization effects were also investigated. Transesterification of coconut oil by glycerol followed by acetylation with acetic anhydride gave AMG-CoCo (Coco : Coconut Oil). In addition, AMG-GMO (GMO : Glycerol monooleate) and AMG-GMO-Epoxy were synthesized by acetylation and epoxidation with glycerol monooleate. It was found that the thermal stability of AMG plasticizers increased in the following order: AMG-GMO-Epoxy > AMG-GMO > AMG-CoCo and all three plasticizers were thermally more stable than those of common petroleum-based plasticizer DOP (Dioctyl phthalate). The tensile strain values of the PVC containing AMG compounds were ca. 770~810%, while tensile strength values were ca. 19~22 MPa, which were higher than those of PVC containing DOP. DMA (Dynamic Mechanical Analysis) results showed that the miscibility of AMG-GMO-Epoxy in PVC was excellent and the $T_g$ of PVC containing AMG-GMO-Epoxy at 50 phr decreased down to $24^{\circ}C$. Finally, the leaching experiment result showed that the weight loss values of PVC containing AMG-GMO and AMG-GMO-Epoxy at 50 phr were as low as 2 and 1%, respectively, indicating that they have high water migration resistance. The above findings suggested that AMG-GMO-Epoxy could be one of plant oil-based PVC plasticizers to replace DOP.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.51-58
• /
• 2008

A series of oleic acid esters containing mercaptobenzothiazole and dialkylenedithiocarbamate, which are potential environmentally friendly lubricating grease additives, were synthesized as 90% yield through several method such as nucleophilic substitution of dialkyl amine and carbon disulfide, reduction reaction, and condensation reaction. The structures of the additives were confirmed by $^1H$-NMR, FT-IR and EA analysis. The additives (1 wt%) were soluble in 100 N BO except C4-DTC-OE and soluble in soybean oil. The tribological properties as lubricating additives in 100 N BO were evaluated using 4-ball tester and the results showed as follows: Bz-thia-OE < C4-DTC-OE < Pyrro-DTC-OE < C8-DTC-OE. Whereas, the 4-ball anti-wear properties were not shown in soybean oil.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.285-290
• /
• 2013

Recently a novel bio refinery process with using nonedible biomass, especially microalgae, has been developed in order to directly reduce $CO_2$ concentration from flue gas and simultaneously produce renewable bio fuel. Micro algae-to-biofuel processes are composed of microalgae cultivation, harvesting, lipid extraction, and bio fuel conversion. So, there are concerns about the energy efficiencies of bio refinery processes. In this study, the net energy ratio of microalgae processes were calculated for the microalgae produced from a pilot photobioreacto using $CO_2$ released from coal combustion. In this study, trans-esterification and pyrolysis processes were used to analyze the net energy efficiencies. Micro algae-to-biofuel processes might produce bio fuels with the higher energy than that of the total consumed energy for cultivation, harvesting, extraction and conversion. If the lipid content of microalgae was higher, the trans-esterification conversion process was more effective than that of pyrolysis process.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.1
• /
• pp.97-102
• /
• 2012

A hermetically sealed oil transformer is designed by applying expanding function of the tank due to the volume changes of the insulation oil according to the temperature rises. When the insulation oil expands, an increase in the volume of the corrugated fin prevents a pressure rise of the transformer. For a wind turbine transformer, a vegetable-oil-immersed transformer has the advantages of excellent biodegradation and fire-resistant properties like an exceptionally high fire point. When vegetable oil is substituted for mineral oil, however, the maximum winding temperature rises because of the decrease in the internal circulation flow rate resulting from the variations of the oil's physical characteristics, such as density and viscosity. The purpose of this study is to develop a hermetically sealed vegetable oil transformer that can be applied in a wind turbine and to analyze the thermal stability of the active part of the transformer to deal with pressure variations due to the temperature changes. In addition, thermal tests for the vegetable oil transformer have been performed, and the measured values are compared with the analysis results.

• Journal of the korean veterinary medical association
• /
• v.33 no.4
• /
• pp.222-234
• /
• 1997

유질은 성분과 위생상태로 결정되어 진다. 질/위생은 사람건강 보호와 적정소비에 대한 관점에서 보면 장점인 영양적 중요성에서 오는 욕망을 이르키는 성질과 일정범위의 좋은점 사이에 원유변화와 만나게되는 것이 필요하다. 높은 질/위생적 원유에 대한 가치의 주요 평가는 : - 부패미 생물의 낮은 수 - 유방염 병원성균이 포함된 병원성군이 없거나 대단히 낮은 수 - 가능한 한 멀리 피할 것은 잔류와 오염 그리고 또는 최고잔류한계(Maximum Residue linits. )이하를 지킬 것. 우유내 부패세균은 다음 군에서 주요 우유성분에 대한 공격의 그들 주요점에 의하여 세분할 수 있다. - 당분해(Glycolytes) - Streptococci, lactobacill; - 단백질 분해(Proteolytes) - Pseudomonads, Enterobacteriaceae, Aerobic sporeformer - 지방분해(Lipolytes) - Pseudomonads, Micncocci, Aeromonads, Coryneb acteria 원유내 부패세균의 존재와 분열은 우유성분 변화와 생산품의 질에 영향을 줄 것이다. 더구나 원유의 맛은 역의 영향이 될 것이며 열 안정성 세균성 효소는 생산품에서 계속적으로 작용된다. 특히 오랜 저장시에 그러하다. 그리고 안정성, cream의 맛과 UHT 우유에 나쁜 영향을 준다. 이 병원성 세균을 고전적 미생물과 최근 발견된 미생물이 포함된다. 현재는 Salmonella, 병원성 E. Coli 균주, Listeria monocytogenes, Campylobacter Jejuni, Yersinia enterocolitica, Staphylococcm aureu는 대단히 중요하다. 원유의 세균학적 질과 지불제도에 대한 법적요구는 우유위생지침 92/94 EEC와 IDF설문 2893/A(전문가모임 A8군)의 결과를 기준으로 설명되었다. IDF Nr. 305/1995는 농장 지불제도에 관한 정보가92/93년 동안 IDF국가들 사이 차이나는 실제적 위치가 실려있다. 지불제도의 차이나는 현상은 보고의 초점과 연관 유질, 위생적 질, 우유시료채취, 수집방법론 그리고 여러가지 지불공식과 관계된 조사는 논쟁이 있었다. 현재 있는 자료를 제시한 몇 나라는 1992년에 응용한 것이고, 기타는 그후 응답으로 1993년과 1994년에 있던 것이 제시되었다. 식품위생에서 법적인 요구는 HACCP제도가 더욱더 추가로 포함된다. 더우기 위험분석은 위생과 질에 관련시켜 모든 연결결정에 대하여는 과학적 근거가 있어야 한다.

• Applied Microscopy
• /
• v.38 no.4
• /
• pp.363-374
• /
• 2008

In this paper we have examined the usefulness of IWFR (the iterative wave-function reconstruction) analysis for through-focal series of high-resolution images for a relative thick crystal. In the work we employed JEOL ARM 1300S, and observed the high-resolution images for a Si crystal at the two orientations of [01-1] and [11-2] having 30 nm and 35 nm thickness respectively. As a result of applying IWFR method on the images we found out that even for a thick crystal by the method we can retrieve the exit-surface wave function. However because of the strong dynamical scattering effect, the image pattern of the function reflects only qualitatively the atomic column structure of the crystal examined. Nevertheless it is no doubt that the pattern would give important clue for the crystal structure.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.138-144
• /
• 1998

$\alpha$-$Fe_2O_3$ fine powders with the sizes smaller than 0.5 $\mu \textrm{m}$ were prepared by the solvolysis and condensation reaction using iron(III) nitrate and ethanol as starting materials. The variation of pH and the change of FT-IR absorption peak were observed to study the reaction mechanism of iron(III) nitrate solution. In addition, the decomposition mechanism of the precipitated gel was investigated by differential scanning calorimeter, X-ray diffractometer and FT-IR spectrometer. Scanning electron microscope and BET method were performed to analyze the effects of Iron (III) nitrate concentration and reaction temperature on the particle size of $\alpha$-$Fe_2O_3$ powders.

• Korean Journal of Food Science and Technology
• /
• v.4 no.2
• /
• pp.61-71
• /
• 1972

The selenium content of a wide variety of Korean food was determined by neutron activation analysis. Most fruits and vegetables contained quantities of selenium less than $0.4{\mu}g/g$. Grain products varied widely in their selenium content with $0.5{\mu}g/g$ and barley cereal as high as $0.7{\mu}g/g$. Dried milk powder sample ranged from $0.7\;to\;0.15{\mu}g/g$. Chicken muscle contained about $0.7{\mu}g/g$. The content of sea food was generally higher, ranging from $0.3\;to\;3.65{\mu}g/g$. These values suggest that a diet well balanced in other nutrients is probably also nutritionally adequate with regard to selenium, although possible effects of cooking and biological availability remain to be investigated.