• Progress in Medical Physics
• /
• v.19 no.1
• /
• pp.73-79
• /
• 2008

Retinal prosthesis is regarded as the most feasible method for the blind caused by retinal diseases such as retinitis pigmentosa (RP) or age related macular degeneration (AMD). Recently Korean consortium launched for developing retinal prosthesis. One of the prerequisites for the success of retinal prosthesis is the optimization of the electrical stimuli applied through the prosthesis. Since electrical characteristics of degenerate retina are expected to differ from those of normal retina, we performed voltage stimulation experiment both in normal and degenerate retina to provide a guideline for the optimization of electrical stimulation for the upcoming prosthesis. After isolation of retina, retinal patch was attached with the ganglion cell side facing the surface of microelectrode arrays (MEA). $8{\times}8$ grid layout MEA (electrode diameter: $30{\mu}m$, electrode spacing: $200{\mu}m$, and impedance: $50k{\Omega}$ at 1 kHz) was used to record in-vitro retinal ganglion cell activity. Mono-polar electrical stimulation was applied through one of the 60 MEA channel, and the remaining channels were used for recording. The electrical stimulus was a constant voltage, charge-balanced biphasic, anodic-first square wave pulse without interphase delay, and 50 trains of pulse was applied with a period of 2 sec. Different electrical stimuli were applied. First, pulse amplitude was varied (voltage: $0.5{\sim}3.0V$). Second, pulse duration was varied $(100{\sim}1,200{\mu}s)$. Evoked responses were analyzed by PSTH from averaged data with 50 trials. Charge density was calculated with Ohm's and Coulomb's law. In normal retina, by varying the pulse amplitude from 0.5 to 3V with fixed duration of $500{\mu}s$, the threshold level for reliable ganglion cell response was found at 1.5V. The calculated threshold of charge density was $2.123mC/cm^2$. By varying the pulse duration from 100 to $1,200{\mu}s$ with fixed amplitude of 2V, the threshold level was found at $300{\mu}s$. The calculated threhold of charge density was $1.698mC/cm^2$. Even after the block of ON-pathway with L-(1)-2-amino-4-phosphonobutyric acid (APB), electrical stimulus evoked ganglion cell activities. In this APB-induced degenerate retina, by varying the pulse duration from 100 to $1200{\mu}s$ with fixed voltage of 2 V, the threshold level was found at $300{\mu}s$, which is the same with normal retina. More experiment with APB-induced degenerate retina is needed to make a clear comparison of threshold of charge density between normal and degenerate retina.

• Journal of the Korean Geographical Society
• /
• v.50 no.3
• /
• pp.255-276
• /
• 2015

This paper presents a multi-agent system model of land-use and cover changes, which is developed and applied to the Gariwang-san and its vicinity, located in Pyeongchang and Jeongseon-gun, Gangwon province, Korea. The Land Use Dynamics Simulator (LUDAS) framework of this study is well suited for representing the spatial heterogeneity and dynamic interactions between human and natural environment, and capturing the impacts of forest-opening policy interventions to future socio-economic and natural environment changes. The model consists of four components: (1) a system of human population, (2) a system of landscape environment, (3) decision-making procedures integrating human(or household), environmental and policy information into forest land-use decisions, and (4) a set of policy scenarios that are related to the forest-opening. The results of model simulation by different combination of various forest management scenarios are assessed by the levels of household income, ecosystem service value and income inequality in the study region. As a result, the optimal scenario of forest-opening policies in the study region is to open the forest to local residential community for the purpose of recreation, considering the distinctive topographical feature. The model developed in this research is expected to contribute to a decision support system for sustainable forest management and various land-use policies in Korea.

• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.221-226
• /
• 2017

The objective of this study was to find out the most optimal bulbil size and planting densities of garlic bulbils to germination for production of leaf garlic. In the first this experiment, the bulbils classified by the size of bulbil to Big (>0.2) and Small (${\leq}0.2$), were planted at $13,680bulbils/m^2$ and $18,240bulbils/m^2$ (Big), $18,240bulbils/m^2$ and $22,800bulbils/m^2$ (Small), respectively. The germination rate, plant height and total yield were measured. In the second experiment, length, width, fresh weight and dry weight of 200 garlic bulbils were measured to analyze the correlation of days to first germination, T50 and germination rate. In the first experiment, the germination rate showed the highest at Big bulbils. The density of $18,240bulbils/m^2$ was the most suitable for cultivation because of the highest germination rate. In the case of yield, it was found that both of the fresh weight and the dry weight of Big bulbil was 2.8 times heavier than Small bulbil. Therefore, Big bulbil with the density of $18,240bulbils/m^2$ was the most suitable for cultivation because of the highest yield. The correlation between each factor of morphological characteristics had a positive correlation between fresh weight, dry weight and width. Also, the germination rate had a positive correlation with fresh weight and width. And, days to first germination and T50 had a negative correlation with fresh weight and width. In conclusion, the optimal planting density is $18,240bulbils/m^2$ and the optimal size of bulbil was 0.2g or more. However, thicker and heavier bulbils could lead to higher and faster germination.

• The Journal of the Petrological Society of Korea
• /
• v.22 no.2
• /
• pp.137-151
• /
• 2013

This study is focused on element behaviors and mineral compositions of the fault rock developed in Yongdang-ri, Yangbuk-myeon, Gyeongju City, Korea, using XRF, ICP, XRD, and EPMA/BSE in order to better understand the chemical variations in fault rocks during the fault activity, with emphasis on dependence of chemical mobility on mineralogy across the fault zone. As one of the main components of the fault rocks, $SiO_2$ shows the highest content which ranges from 61.6 to 71.0%, and $Al_2O_3$ is also high as having the 10.8~15.8% range. Alkali elements such as $Na_2O$ and $K_2O$ are in the range of 0.22~4.63% and 2.02~4.89%, respectively, and $Fe_2O_3$ is 3.80~12.5%, indicating that there are significant variations within the fault rock. Based on the chemical characteristics in the fault rocks, it is evident that the fault gouge zone is depleted in $Na_2O$, $Al_2O_3$, $K_2O$, $SiO_2$, CaO, Ba and Sr, whereas enriched in $Fe_2O_3$, MgO, MnO, Zr, Hf and Rb relative to the fault breccia zone. Such chemical behaviors are closely related to the difference in the mineral compositions between breccia and gouge zones because the breccia zone consists of the rock-forming minerals including quartz and feldspar, whereas the gouge zone consists of abundant clay minerals such as illite and chlorite. The alteration of the primary minerals leading to the formation of the clay minerals in the fault zone was affected by the hydrothermal fluids involved in fault activity. Taking into account the fact that major, trace and rare earth elements were leached out from the precursor minerals, it is assumed that the element mobility was high during the first stage of the fault activity because the fracture zone is interpreted to have acted as a path of hydrothermal fluids. Moving toward the later stage of fault activity, the center of the fracture zone was transformed into the gouge zone during which the permeability in the fault zone gradually decreased with the formation of clay minerals. Consequently, elements were effectively constrained in the gouge zone mostly filled with authigenic minerals including clay minerals, characterized by the low element mobility.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_3
• /
• pp.1031-1042
• /
• 2023

In this study, a deep learning model was developed to predict the yield of cabbage and radish, one of the five major supply and demand management vegetables, using satellite images of Landsat 8. To predict the yield of cabbage and radish in Gangwon-do from 2015 to 2020, satellite images from June to September, the growing period of cabbage and radish, were used. Normalized difference vegetation index, enhanced vegetation index, lead area index, and land surface temperature were employed in this study as input data for the yield model. Crop yields can be effectively predicted using satellite images because satellites collect continuous spatiotemporal data on the global environment. Based on the model developed previous study, a model designed for input data was proposed in this study. Using time series satellite images, convolutional neural network, a deep learning model, was used to predict crop yield. Landsat 8 provides images every 16 days, but it is difficult to acquire images especially in summer due to the influence of weather such as clouds. As a result, yield prediction was conducted by splitting June to July into one part and August to September into two. Yield prediction was performed using a machine learning approach and reference models , and modeling performance was compared. The model's performance and early predictability were assessed using year-by-year cross-validation and early prediction. The findings of this study could be applied as basic studies to predict the yield of field crops in Korea.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.559-571
• /
• 2017

This study was conducted to determine the adhesive performances of plywoods affected by layering direction and the amounts of thermoplastic films. The face and back layers of veneer were hardwood species (Mixed light hardwood) and core layer veneer was radiata pine (Pinus radiata D. Don). Thermoplastic film used as adhesive were polypropylene (PP) film and polyethylene (PE) film. Thermal analysis and tensile strength were investigated on each films. As a result, the melting temperature of PP and PE films were $163.4^{\circ}C$ and $109.7^{\circ}C$, respectively, and the crystallization temperature were $98.9^{\circ}C$ and $93.6^{\circ}C$, respectively. Tensile strength and elongation of each films appeared higher on the width direction than length direction. Considering the characteristics of the thermoplastic films, the test for the amount of film used was carried out by layering film to the target thickness on veneer. The effecting of layering direction of film on plywood manufacturing was conducted by laminating in the length and width directions of the film according to the grain direction of veneer. Tensile-shear strength of plywood in wet condition was satisfied with the quality standard (0.7 MPa) of KS F 3101 when the film was used over 0.05 mm of PP film and over 0.10 mm of PE film. Tensile-shear strength of plywood after cyclic boiling exceeded the KS standard when PP film was used 0.20 mm thickness. Furthermore, higher bonding strength was observed on a plywood made with width direction of film according to grain direction of veneer than that of length direction of film. Based on microscopic analysis of the surface and bonding line of plywood, interlocking between veneers by penetration of a thermoplastic film into inner and cracks were observed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.3
• /
• pp.137-144
• /
• 2002

To obtain the basic information about pedo-genetic properties and origin of the parent materials of "Yongil" series in Korea, this study was conducted. The soil characteristics such as chemical and sand particles of typifying pedon, and distributional patterns in the area were analysed. The typifying pedon of "Yongil" series was distributed on the top of rolling area in the eastern coastal area of Korea, Yonggan-ri, Heunghae-eup, Pohang-si, Gyongbuk province. The results are as follows; The "Yongil" series in Korea was distributed on the rolling hill under altituede of 50m, and was used for cultivated upland, and the total acreage about 376ha. The content of sand was more than 50%, however the clay content in the depth of 40~100cm of the soil profile rapidly increased. The medium sand (0.5~0.1mm in size) are dominant among sand fraction, but coarse one are rare. So the rate of medium to total sand was higher in IIB horizon as 0.62~0.76 than A and C horizons. The content of heavy minerals in medium sand was low as 1.0~6.6% and the ratio of quartz to feldspars was higher in Ap2 and B1 horizon as 1.7 than IIB horizon which had less than 1.39. The cumulative curves of sand particles in Yeongil series showed the well sorted and differ from residuum soils derived from sand stone, but similar to dune soils(Haeri series). So it could be deducted from this study that "Yeongil" series are aeolian deposits derived from aeolian materials and have bisequum profile; the upper part depth of 40cm was recent cover sand, the horizon of 40~100cm depth was developed in Pleistocene epoch from the same materials.

• Journal of Mushroom
• /
• v.15 no.3
• /
• pp.129-133
• /
• 2017

Oyster mushroom is a type of mushroom that is commonly cultivated and consumed in Korea. P. ostreatus 'Suhan' is a preferred cultivar for many mushroom farmers because it has a dark pileus and thick stipe. However, as it is very sensitive to environmental conditions, farmers consistently demand an alternative cultivar. To develop a new cultivar, the parental strains KMCC01680 ('Suhan') and KMCC00478 ('Gosol') were selected from various collected P. ostreatus strains by cultivating genetic resources. P. ostreatus 'Heuksol' was developed by the method of Mon-Mon crossing between monokaryotic strains derived from 'Suhan' and 'Gosol'. Thirty strains of 174 crossed strains were initially selected by cultivation experiments. After bulk cultivation tests, 'Heuksol' was selected. The nuclear DNA profile of 'Heuksol' was similar to those of the parental strains, 'Suhan' and 'Gosol', when RAPD (random amplified polymorphic DNA) primers and UPF (Universal PCR Fingerprinting) 2, 3, and 4 were used. The optimum temperature for mycelial growth was $30^{\circ}C$ for 'Heuksol', but medium-high temperatures were also appropriate, especially $13-20^{\circ}C$. The fruiting body production per bottle (1,100 mL) was approximately 140.8 g. When compared to the control strain 'Suhan', the thickness of the stipe of 'Heuksol' was greater than that of 'Suhan' (13.5 mm vs 9.4 mm). The pileus diameter of 'Heuksol' was similar to that of 'Suhan' and the pileus thickness of 'Heuksol' and 'Suhan' was 19.7 mm and 21.8 mm, respectively. 'Heuksol' had more a productive stipe number than 'Suhan' and the pileus of 'Heuksol' was dark gray, even at high temperatures. Therefore, it was suggested that this new cultivar, 'Heuksol', could provide an alternative to 'Suhan' and contribute to the profit of oyster mushroom farms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.136-152
• /
• 2017

The thermodynamic models, PC-SAFT (Perturbed-Chain Statistical Associated Fluid Theory) state equation and the Two-model approach liquid activity coefficient model NRTL (Non Random Two Liquid) + Henry + Peng-Robinson, for modeling the Rectisol process using methanol aqueous solution as the $CO_2$ removal solvent were compared. In addition, to determine the new binary interaction parameters of the PC-SAFT state equations and the Henry's constant of the two-model approach, absorption equilibrium experiments between carbon dioxide and methanol at 273.25K and 262.35K were carried out and regression analysis was performed. The accuracy of the newly determined parameters was verified through the regression results of the experimental data. These model equations and validated parameters were used to model the carbon dioxide removal process. In the case of using the two-model approach, the methanol solvent flow rate required to remove 99.00% of $CO_2$ was estimated to be approximately 43.72% higher, the cooling water consumption in the distillation tower was 39.22% higher, and the steam consumption was 43.09% higher than that using PC-SAFT EOS. In conclusion, the Rectisol process operating under high pressure was designed to be larger than that using the PC-SAFT state equation when modeled using the liquid activity coefficient model equation with Henry's relation. For this reason, if the quantity of low-solubility gas components dissolved in a liquid at a constant temperature is proportional to the partial pressure of the gas phase, the carbon dioxide with high solubility in methanol does not predict the absorption characteristics between methanol and carbon dioxide.

• Journal of Mushroom
• /
• v.9 no.2
• /
• pp.59-62
• /
• 2011

To develop a new cultivar of King oyster mushroom(Pleurotus eryngii), G09-21 as parental strain was selected by the method of Di-mon crossing between monokaryotic strains derived from ASI 2824(Keunneutari No.2) and dikaryotic strain ASI 2887(Aeryni 3). The Pe21-51($G09-21-10{\times}2844-11$) was shown the best cultural characteristics, selected to be a new cultivar and named as 'Song-A'. The 'Song-A' was formed incompatibility line distinctly in the confrontation growth of parental strains Keunneutari No.2, Aeryni 3 and ASI 2844. The optimum temperature for mycelial growth, fruiting body development and pH arrange were $25{\sim}30^{\circ}C$, $14{\sim}16^{\circ}C$ and pH5~8, respectively. Fruiting body production per bottle was about $94.7{\pm}29.5$ g which is almost 106% quantity compared to that of other cultuvar Keunneutari No.2. And also the stip is thick and long but the number of available stipe is few. Analysis of the genetic characteristics of the new cultivar 'Song-A' showed a different DNA profile as that of the control strains, Keunneutari No.2, Aeryni 3 and ASI 2844, when RAPD(Random Amplified Polymorphic DNA) primers URP4 and 7 were used. This new cultivar 'Song-A' of Pleurotus eryngii is characterized by a small number of primordia formation and the stip is thick and long. Therefore, we expect that this new strain will save of labor and cost by without culling work.