• Title/Summary/Keyword: 열경화성

Search Result 145, Processing Time 0.024 seconds

GF/PE 복합계료의 인장파괴거동에 관한 연구

  • 엄윤성;최영근;고성위
    • Proceedings of the Korean Society of Fisheries Technology Conference
    • /
    • 2003.05a
    • /
    • pp.64-65
    • /
    • 2003
  • 열경화성 수지를 사용한 복합재료의 연구결과들을 종합하여 보면 인장강도에 영향을 미치는 인자에 대한 다양한 연구결과가 있으나, 섬유함유율과 온도에 따른 인장파괴기구에 대한 고찰은 아직 희박한 실정이다. 따라서 이 연구에서는 열가소성 복합재료의 기계적 특성과 파괴거동에 관한 종합적인 연구의 일환으로 섬유함유율이 10%인 GF/PE 복합재료를 -5$0^{\circ}C$에서 6$0^{\circ}C$사이의 온도범위에서 인장시험을 통하여 임계 파괴에너지의 거동을 고찰하고, 각각의 온도범위에서의 파단면을 SEM사진을 통해 비교 검토하였다. (중략)

  • PDF

페암면 재생패널의 제조 및 특성

  • 조명호;강영구
    • Proceedings of the Korean Institute of Industrial Safety Conference
    • /
    • 2001.11a
    • /
    • pp.343-346
    • /
    • 2001
  • 경량 건축소재는 건축자재의 경량화, 고급화 및 다양화 등의 기능성 건축소재로의 역할을 요구하고 있으며 그 중 대표적인 것으로는 polyurethane foam이 있다. 일반적인 플라스틱 foam의 경량 건축소재는 난연성에 대한 문제점과 첨가제에 의한 중량 증가, 화재발생시 과다연기발생 등의 문제점이 있으며 저밀도 콘크리트 등의 무기소재는 flexibility가 떨어져 충격과 휭강도가 매우 낮은 단점을 가지고 있다./sup 1.2)/ 열경화성 수지인 polyurethane도 난연성과 강도에 대한 단점을 가지고 있어 sodium silicate 혼합에 의한 난연성을 향상시킬 수 있으나/sup 3)/ 국내 난연 3급의 규격에도 미치지 못하는 특성을 가지고 있다.(중략)

  • PDF

A Viscoelastic Study of Glass Transition and Degradation Processes of Phenolic Resin/Carbon Fiber Composites (페놀수지/탄소섬유 열경화성 복합재료의 유리전이와 고온 분해과정에서 관찰되는 점탄성 특성 연구)

  • ;J. C. Seferis
    • The Korean Journal of Rheology
    • /
    • v.11 no.1
    • /
    • pp.9-17
    • /
    • 1999
  • Viscoelastic characteristics of cured phenolic resin/carbon fiber composite materials were investigated through glass transition and degradation reaction processes in the high temperature region up to $400^{\circ}C$. A typical glass transition of the cross-linked thermoset polymer was followed by irreversible degradation reactions, which were exhibited by the increasing storage modulus and loss modulus peak. A degradation master curve was constructed by using the vertical and horizontal shift factors, both of which complied well with the Arrhenius equation in light of the kinetic expression of degradation rate constants. Using an analogy to the Havriliak-Negami equation in dielectric relaxation phenomena, a viscoelastic modeling methodology was developed to characterize the frequency- and temperature-dependent complex moduli of the degrading thermoset polymer composite systems. The temperature-dependent relaxation time of the degrading composites was determined in a continuous fashion and showed a minimum relaxation time between the glass transition and degradation reaction regions. The capability of the developed modeling methodology was demonstrated by describing the complex behavior of the viscoelastic complex moduli of reacting phenolic resin composite systems.

  • PDF

Passivation Layer (Thermosetting Film)가 형성된 유기박막 트랜지스터의전기적 특성 변화에 대한 연구

  • Seong, Si-Hyeon;Kim, Gyo-Hyeok;Jeong, Il-Seop
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.380-380
    • /
    • 2013
  • 본 논문에서는 외기 환경 요인 중에서 H2O와 O2의 영향으로 성능이 저하되는 유기박막트랜지스터(OTFT)의 수명시간 향상을 위하여 필요한 passivation layer의 효과에 대하여 알아 보았다. OTFT에 기존의 액상 공정이나 증착 공정으로 단일 passivation layer또는 다층 passivation layer를 형성하는 방식과는 다르게 향후에 산업 전반에 적용이 기대되는 것을 고려하여 제작 공정의 간편성을 위하여 film 형태로 되어 있는 열경화성 epoxy resin film으로 passivation layer를 구현하는 방법을 사용하여 OTFT의 storage stability를 평가하였다. passivation layer가 없는 OTFT와 열경화성 epoxy resin film으로 passivation된 OTFT의 전기적 특성이 서로 비교 평가되었으며 또한 30일 동안 온도 $25^{\circ}C$ 상대습도 40%의 환경을 갖는 Desicator 안에서 소자를 보관하여 시간에 따른 전기적 특성 변화를 검증하여 epoxy resin film의 passivation layer으로의 적용가능성을 검증하였다. 결과적으로 30일 후의 passivation layer가 없는 OTFT의 전기적 특성은 매우 낮게 떨어진 반면에 epoxy resin film으로 passivation layer가 구현된 OTFT의 mobility는 $0.060cm^2$/Vs, VT는 -0.18 V, on/off ratio는 $3.7{\times}10^3$으로 초기의 소자 특성이 잘 유지되는 결과를 얻었다. OTFT는 Flexible한 polyethersulfone (PES)기판에 게이트 전극이 하부에 있는 Bottom gate 구조로 제작되었고 채널 형성을 위한 유기반도체 재료로 6,13-bis (triisopropylsilylethynyl) (TIPS) pentacene이 사용되었고 spin coating된 Poly-4-vinylphenol (PVP)가 게이트 절연체로 사용되었다. 이때 Au전극은 Shadow mask를 이용하여 증착하였다. 또한 OTFT의 채널 길이 $100{\mu}m$, 채널 폭 $300{\mu}m$의 영역에 Drop casting법을 사용하여 채널을 형성하였다. 물리적 특성은 scanning electron microscopy (SEM), scanning probe microscopy (SPM), x-ray diffraction (XRD)를 사용하여 분석하였고, 전기적 특성은 Keithley-4200을 사용하여 추출하였다.

  • PDF

The Recovery of Carbon Fiber from Carbon Fiber Reinforced Epoxy Composites Applied to Railway Vehicles (철도차량용 폐 복합소재로부터 탄소섬유 회수)

  • Lee, Suk-Ho;Kim, Jung-Seok;Lee, Cheul-Kyu;Kim, Yong-Ki;Ju, Chang-Sik
    • Journal of the Korean Society for Railway
    • /
    • v.12 no.6
    • /
    • pp.1059-1066
    • /
    • 2009
  • Recently, the amount of thermosetting plastic wastes has increased with the production of reinforced plastic composites and causes serious environmental problems. The epoxy resins, one of the versatile thermosetting plastics with excellent properties, cannot be melted down and remolded as what is done in the thermoplastic industry. In this research, a series of experiments that decompose epoxy resin and recover carbon fibers from carbon fiber reinforced epoxy composites applied to railway vehicles was performed. We experimentally examined various decomposition processes and compared their decomposition efficiencies and mechanical property of recovered carbon fibers. For the prevention of tangle of recovered carbon fibers, each composites specimen was fixed with a Teflon supporter and no mechanical mixing was applied. Decomposition products were analyzed by scanning electron microscope (SEM), gas chromatography mass spectrometer (GC-MS), and universal testing machine (UTM). Carbon fibers could be completely recovered from decomposition process using nitric acid aqueous solution, liquid-phase thermal cracking and pyrolysis. The tensile strength losses of the recovered carbon fibers were less than 4%.

Characteristics of Thermoplastic Vulcanizate Weatherstrip Prepared by Water-Foaming Technique (수발포 기술을 적용한 열가소성 고무 Weatherstrip 특성)

  • 이성훈;김진국
    • Polymer(Korea)
    • /
    • v.27 no.5
    • /
    • pp.436-442
    • /
    • 2003
  • Thermosetting elastomer such as EPDM (Ethylene Propylene Dien Rubber) has been applied to the sponge weatherstrip of a vehicle as a main material. However, the thermosetting elastomers have limited recycling and have brought about the environmental problems. Furthermore, many steps of the manufacturing process such as formulation, mastication and vulcanization make difficult to control uniformity of the endproducts. These problems of current EPDM weatherstrip necessitated development of a new recyclable material, Thermoplastic Vulcanizates (TPV). In this study the influence of the water contents, and the processing conditions. On the foam density and structure in water blowing process was carried out. We found that TPV also can be foamed with water, maintaining the uniformity form this study. Therefore, many inevitable problems of EPDM weatherstrip can be solved, and this new technique is expected to take a roll of making a breakthrough in the rubber industry.

A Molecular Dynamics Simulation Study on Hygroelastic behavior of Thermosetting Epoxy (열경화성 에폭시 기지의 흡습탄성 거동에 관한 분자동역학 전산모사)

  • Kwon, Sunyong;Lee, Man Young;Yang, Seunghwa
    • Composites Research
    • /
    • v.30 no.6
    • /
    • pp.371-378
    • /
    • 2017
  • In this study, hygroelastic behavior of thermosetting epoxy is predicted by molecular dynamics simulations. Since consistent exposures to humid environments lead to macroscopic degradation of polymer composite, computational simulation study of the hygroscopically aged epoxy cell is essential for long-time durability. Therefore, we modeled amorphous epoxy molecular unit cell structures at a crosslinking ratio of 30, 90% and with the moisture weight fraction of 0, 4 wt% respectively. Diglycidyl ether of bisphenol F (EPON862) and triethylenetetramine (TETA) are chosen as resin and curing agent respectively. Incorporating equilibrium and non-equilibrium ensemble simulation with a classical interatomic potential, various hygroelastic properties including diffusion coefficient of water, coefficient of moisture expansion (CME), stress-strain curve and elastic modulus are predicted. To establish the structural property relationship of pure epoxy, free volume and internal non-bond potential energy of epoxy are examined.

Synthesis and Characterization of Wholly Aromatic Polyester Liquid Crystalline Thermosets (전방향족 폴리에스터 열경화성 액정의 합성과 특성)

  • Moon, Hyun-Gon;Jung, Myung-Sup;Chang, Jin-Hae
    • Polymer(Korea)
    • /
    • v.36 no.1
    • /
    • pp.9-15
    • /
    • 2012
  • We prepared a series of aromatic liquid crystals (LCs) based on wholly aromatic ester units with the reactive end group methyl maleimide by means of melt condensation method, and the resulting LCs were thermally crosslinked to produce liquid crystalline thermoset (LCT) films. The synthesized LCs and LCTs were characterized with Fourier transform infrared (FTIR) spectroscopy, wide angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), thermomechanical analysis (TMA), and polarizing optical microscopy (POM) with a hot stage. The glass transition temperature ($T_g$) and coefficient of thermal expansion are strongly affected by the mesogen units in their main chain structures. The $p$-substituted biphenyl LC was found to have the highest thermal property value.

A Study on the Improvement of Bending Characteristics of 3D Printed Thermoplastic Structures Reinforced at the Lateral Surface using Continuous Fiber Reinforced Thermosetting Composites (열경화성 연속섬유 복합재를 이용해 외측 보강된 3D 프린팅 열가소성 복합재 구조물의 굽힘 특성 향상에 대한 연구)

  • Baek, Un-Gyeong;Nam, Gibeop;Roh, Jae-Seung;Park, Sung-Eun;Roh, Jeong-U
    • Composites Research
    • /
    • v.34 no.2
    • /
    • pp.136-142
    • /
    • 2021
  • 3D printing technology has the advantage of easy to make various shapes of products without a mold. However, it has a problem such as mechanical properties vary greatly depending on materials and manufacturing conditions. Thus, the need for research of 3D printing technology on ways to reduce manufacturing cost compared to physical properties is increasing. In this study, a 3D printing thermoplastic structure was fabricated using short fiber carbon fiber reinforced nylon filaments. And a method of improving mechanical properties was proposed by reinforcing the outer surface using pultruded continuous fiber-type carbon fiber or glass fiber-reinforced thermosetting composite material. It was confirmed that the bending properties were improved according to the reinforcing position of the stiffener and the type of fiber in the stiffener.

Fuorine-Containing High Temperature Polymers for Microelectronic Applications (불소를 함유하는 전자재료용 내열성 고분자)

  • Kim, Sang Youl
    • Polymer Science and Technology
    • /
    • v.3 no.1
    • /
    • pp.36-43
    • /
    • 1992
  • Trifluoromethyl group을 내열성고분자의 주쇄에 도입하면 내열성의 큰 손실없이 용해도의 증가 및 유전상수의 감소등 절연재료로서의 성능을 향상시켜 주지만, 유연한기의 도입에 따른 $T_g$의 저하등 부정적인 효과도 나타낸다. 분자구조설계에 의해 기존 고분자재료의 성능을 향상시키려는 시도는 흔히 향상되어지는 성질들에 반비례하여 어는 다른 성질의 저하를 초래하는 경향이 있으나, 유전상수나 가공성 이외에도 낮은 열팽창계수를 갖는 polyimides, 열경화성수지인 poly(benzocyclobutene) 등의 packaging 재료로서의 개발등, 낮은 절연율, 내열성, 가공성, 접착력, 적절한 열팽창계수 및 기계적 성질 등 가능한 모든 필요성질을 동시에 최대한 만족시키는 고분자재료에 대한 개발노력이 계속되어지고 있으며 장차 혁신적인 새로운 고분자 재료의 등장도 이루어지리라고 본다.

  • PDF