• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.685-693
• /
• 1990

The heat transfer coefficients were calculated numerically to see the effects of radiation around the porous medium put on the flat plate at a distance from the leading edge of flat plate for the two-dimensional laminar flows. To verify the analytical model developed and invoke the heat/mass transfer analogy, an experiment was carried out using naphthalene sublimation technique. From the effects of the wake, Sherwood number is maximum around the region where the porous medium is attached. The theoretical results correspond well with the experimental results at small Darcy number. Permeability of ceramic blocks used for experiment was also measured and the Forchheimer equation is applicable in our measurement range.

• Ceramist
• /
• v.4 no.1
• /
• pp.5-13
• /
• 2001

차세대 ULSI 소자의 다층금속배선을 위한 저유전 물질중에서, 기존의 절연막인 TEOS-$SiO_2$ 증착 장비 및 공정을 최대한 이용할 수 있으며, 물성 또한 TEOS oxide와 유사하다는 점에서 적용 시점을 앞당길 수 있는 SiOF 박막과 SiOC 박막의 특성에 대해 고찰해 보았다. 1세대 저유전 물질이라 할 수 있는 SiOF는 후속공정에도 안정적인 상태의 박막을 얻기 위해서는 3.0이하의 유전상수를 얻는 것이 불가능한 반면, SiOC는 3.0 이하의 유전상수를 가지는 안정적인 박막을 얻을 수 있다. SiOC 물질은 저밀도의 단일물질로서, 물질 내부에 후속공정에 영향을 미칠만한 기공을 포함하지 않기 때문에 후속 CMP 공정에 적합하였으며, $450^{\circ}C$이하의 열 공정에서도 응력변화 및 박막성분 탈착이 거의 일어나지 않는 점 또한 SiOC 박막의 우수한 후속공정 적합성을 보여주는 결과였다. 이러한 결과를 종합하여 볼 때, 현재 사용되고 있는 1세대 저유전 물질인 SiOF 박막을 대체할 차세대 저유전 물질로 SiOC 물질이 유망하며, 이는 3.0 이하의 유전상수를 요구하는 Gb DRAM 소자나 보다 빠른 동작속도가 생명인 논리회로(logic circuit) 소자에 적용될 경우 큰 소자특성 개선이 기대된다.

• Prospectives of Industrial Chemistry
• /
• v.20 no.4
• /
• pp.1-20
• /
• 2017

질화붕소나노튜브(BNNT: Boron Nitride Nanotubes)는 근래에 들어 전 세계적으로 많은 주목을 받고 있는 나노신소재이다. CNT와 유사한 기계적 특성과 열전도, 열팽창 특성을 가지고 있지만 동시에 세라믹의 특성도 가지고 있어 열적/화학적 안정에 있어서는 CNT와 비교하여 매우 우수하다. 특히 BNNT를 구성하고 있는 붕소는 열중성자를 흡수할 수 있는 능력이 CNT를 구성하고 있는 탄소와 비교하여 20만 배나 높기 때문에, 우수한 기계적 특성을 이용한 경량화와 방사선 차폐능을 동시에 보유할 수 있는 미래 우주공학 물질로 매우 유용하다. 그러나 제조하는데 상대적으로 많은 에너지가 필요하고, 전 세계적으로 아직 대량생산이 이루어지지 않고 있으며, 제조 시 생성되는 불순물의 양이 많은 것이 단점이다. 또한 BNNT를 정제하는 것은 매우 어려워 산업적 응용은 아직 제한적이라 할 수 있지만, BNNT가 CNT와 세라믹의 특성을 동시에 보유하고 있다는 물질의 우수성과 활발한 연구개발 활동을 감안하면, 이에 대한 해결점을 찾을 수 있을 것으로 예상된다. 본 고찰에서는 다양한 BNNT의 제조방법과 각 방법의 장단점을 소개하고, 현재 연구되고 있는 BNNT의 산업적 응용에 대해 소개할 것이다. 이를 통해 국내에서 매우 미진한 BNNT 관련 연구가 활성화되는 계기가 될 것을 기대한다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.7
• /
• pp.1026-1034
• /
• 2016

To develop a natural antimicrobial agent, we investigated the antimicrobial activities of 13 species of edible herbal plant extracts against major Gram-positive foodborne bacteria. Among the 13 screened edible herbal plants, Caesalpinia sappan L. showed the highest antimicrobial activity. In the paper disc agar diffusion assay, Caesalpinia sappan L. extracts had strong antibacterial activities against most Gram-positive bacteria but did not have antibacterial activities against most Gram-negative bacteria. Minimum inhibitory concentrations of the ethanol extract were 0.06 mg/mL against Clostridium difficile and Listeria monocytogenes and 0.03 mg/mL against Staphylococcus aureus. Their inhibitory activities were not reduced by heat treatment or pH adjustment against C. difficile, L. monocytogenes, and S. aureus. Antimicrobial activities were higher in ethanol extract than in distilled water extract. These results support the potential use of Caesalpinia sappan L. ethanol extract as an antimicrobial agent or functional food components against Gram-positive bacteria.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.37-55
• /
• 1997

최근 선진국가들에서는 전자파 장애 증후군에 관심이 집중되고 있는데, 전자파에 장기 노출 되는 인구에서 뇌암이나 유방암, 백혈병 등의 발생률이 높다는 보고(Kolmodin-Hedman 등, 1988 ; Demers등, 1991)가 있어서 전자제품의 생산업체는 물론이고 사용자에 대해서도 불안한 관심사가 되 어 있다. 전자파가 생체에 미치는 영향은 열적 효과와 비열적 효과에 의한 것으로 구분된다. Microwave는 약 300MHz에서 300GHz 사이(파장 1m에서 1mm사이)의 주파수를 가지는 전자파로서 이온의 운동이나 쌍극자분자(dipole molecule)들을 진동시키므로서 조직에 열이 발생한다. 열이 과도하게 발생하면 세포 단백질이 응고하게 되는 등 일반적으로 생각할 수 있는 고열로 인한 여러 가지 유해환경이 조직 에 조성될 수 있다. 실제로 고전압의 전자파에 노출된 안구의 수정체에 백내장 등의 병변이 발생한 것 으로 보고된 바 있다(Adey,1981). 일반적으로 전자파의 생체에 대한 작용으로는 이렇듯 조직에 흡수 되는 전자파의 에너지에 의한 열작용이 지배적인 것으로 생각되어 왔다. 그러나 초저주파역대(Extre- mely low frequency, EMF)의 변조 및 펄스파 등의 영향에 관해서도 조직의 온도상승으로는 설명할 수 없는 현상이 보고된 바 있다. 이러한 비열적 효과가 신경계에 끼치는 영향에 대해서는 혈액뇌관문 의 투과성 변화(Oscar와 Hawkins, 1977), 뇌종양 발생, 칼슘대사 이상 및 신경전달물질에 대한 영향 등이 주장(Anderson, 1993)되고 있으나 아직 그 분명한 기전이 밝혀져 있지 않은 상태이다. 또한 그 영향의 평가에 서도 일정한 기준이나 지표가 정해지지 않은 실정이다. 그러므로 신경계에 대한 대체적인 소개와 더불어 전자기파의 영향에 대한 이제까지의 보고를 종합 하고 향후 연구의 방향을 소개하고자 한다.> 이온이 공동 첨가제로 더 적합하다.u(30 .angs. )/CoFe(35 .angs. )/NiO(800 .angs. ) 구조를 갖는 spin-valve 박막은 극대 MR비 6.3%, 유효자기장감응도 약 0.5(%/Oe)를 보여 spin-valve head 재료로 적합함을 알 수 있었다.다.다.다.는 각각 148 meV .angs. $^{2}$, 103.8 meV .angs. $^{2}$와 1.77 * $10^{-6}$ erg/cm, 0.67 * $10^{-6}$ erg/cm 였다.다.자 노인들을 영주권자와 귀화 시민권자의 구분없이 하나의 집단으로 간주하고 분석해 왔던 것을 볼 때, 앞으로의 연구는 이론적으로나 방법론적으로 시민권의 유무가 주거형태에 끼치는 영향도 함께 고려해야 할 것이다.에 나타난 인도의 영향은 여성복식과 남성복식에 있어서 서로 유사점과 차이점이 보이는데, 인도의 영향이 여성복식에 있어서 그 빈도가 더 높고, 종류가 더 다양함을 볼 수 있다. 여성복식에 있어서는 12가지의 다양한 인도복식스타일이 나타났으며, 그중 가장 많이 보이는 스타일은 Indian Shirt/Blouse/Smock/ Dress이며, 그 뒤를 이어 Madras, Indian lowery등을 볼 수 있다. 남성복식애 나타난 7가지의 스타일 중에는 Madras가 가장 빈도가 높으며 그외의 스타일들은 그 빈도가 매우 낮음을 볼 수 있다. 인도의 영향의 정도 (Attribution Categories) 있어서는 여성과 남성복식 모두에 있어서 인도에서 직접 수입된(originated) item이 각각 전체의 90%와 81%를 차지하여, 인도복식의 영향은 받았으나 미국내에서 제작된(attributed and connotated) item 보다 휠씬 더 많은 수를 보였다. 인도복식스타일이 가장

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.182-193
• /
• 2022

Purpose: By measuring and evaluating the risk of biodiesel through non-volatile residue (NVR) and flash point and explosion limit measurement at a specific temperature according to ASTM test standards, the risk of chemical fire causative substances is identified and a universal evaluation method By derivation and securing the risk-related data of the material, it can be used for the identification and analysis of the cause of the fire, and it can be applied to the risk assessment of other chemical substances Method: In order to measure the risk of biodiesel, it was measured using the non-volatile residue(NVR) measurement method, which measures how much flammable liquid is generated at a specific temperature. Heating was tested by applying KS M 5000: 2009 Test Method 4111. In addition, the flash point was measured using the method specified in ASTM E659-782005, and the energy supply method was measured using the constant temperature method. In addition, the explosion limit measurement was conducted in accordance with ASTM E 681-04 「Standard test method for concentration limits of flammability of chemicals(Vapors and gases)」 test standard. Result: As a result of checking the amount of combustible liquid by the non-volatile residue (NVR)measurement method, the non-volatile residue(NVR) of general diesel when left at 105±2℃ for 3 hours was about 30% (70% of volatile matter) and about 4% of biodiesel. In addition, similar results were obtained for the non-volatile residue(NVR)heating temperature of 150±2℃, 3 hours and 200±2℃ for 1 hour, and white smoke was generated at 200℃ or higher. In addition, similar values were obtained as a result of experimentally checking the explosion (combustion) limits of general diesel, general diesel containing 20% biodiesel, and 100% biodiesel. Therefore, it was confirmed that the flammability risk did not significantly affect the explosion risk. Conclusion: The results of this study suggested the risk judgment criteria for mixtures through experimental research on flammable mixtures for the purpose of securing the effectiveness, reliability, and reproducibility of the details of the criteria for determining dangerous substances in the existing Dangerous Materials Safety Management Act. It will be possible to provide reference data for the judgment criteria for flammable liquids that are regulated in the field. In addition, if the know-how for each test method is accumulated through this study, it is expected that it will be used as basic data in the research on risk assessment of dangerous substances and as a basis for research on the determination of dangerous substances.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.1
• /
• pp.143-150
• /
• 2014

Recently, supercritical fluid process has been widely used in material synthesis and processing due to their remarkable properties such as high diffusivity, low viscosity, and low surface tension. Supercritical carbon dioxide is the most attractive solvent owing to their characteristics including non-toxic, non-flammable, chemically inert, and also it has moderate critical temperature and critical pressure. In addition, supercritical carbon dioxide would dissolve many small organic molecules and most polymers. In this study, we have prepared the poly (ethylene oxide)/clay nanocomposites using supercritical fluid as a carbon dioxide. Commercialized Cloisites-15A and Cloisites-30B used in this study, which are modified with quaternary ammonium salts. The nanocomposites of polymer/clay were characterized by XRD, TGA and DSC. Poly (ethylene oxide)/clay nanocomposites by supercritical fluid show higher thermal stability than nanocomposites prepared by melt process. In addition, supercritical fluid process would be increased dispersibility of the nanoclay in the matrix.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.20 no.2
• /
• pp.133-138
• /
• 1998

Choanal atresia may be membrane or bony, unilateral or bilateral. Approximately 90% of the choanal atresia are bony type. Unilateral choanal atresia often eludes the diagnosis because of the absence of subjective symptoms in the neonatal period. However, bilateral choanal atresia presents at birth with cyclic respiratory distress aggravated by feedings. So complete bilateral choanal atresia is considered as a neonatal emergency. Examinations for the diagnosis of chonal atresia include 1) attempt at passing a rubber catheter or probe through the patient s nose, 2) mirror examination of the nasopharynx, 3) digital examination of the nasopharynx, 4) X-ray examination after installation of radiopaque materal into the nasal cavity. But, computed tomography has become accepted method for evaluation of choanal atresia. Surgical repair of choanal atresia is accomplished via transnasal or transpalatal approach. Advantages of the transpalatal approach are improved exposure and the preservation of mucosal flap along the newly formed apertures. On the other hand, the transpalatal approach carries the risk of injury to the greater palatine neurovascular complex, and requires longer operative time. After careful physical and radiographic examinations, we accomplished the surgical repair of the complete bony bilateral choanal atresia via transpalatal approach without complications.

• Resources Recycling
• /
• v.12 no.6
• /
• pp.13-18
• /
• 2003

The initial NiCuZn synthetic ferrite were acquired from thermally decomposing the metal nitrates Fe($NO_3$)$_3$ㆍ$9H_2$O, Zn($NO_3$)$_2$ㆍ$6H_2$O, Ni($NO_3$3)$_2$ㆍ $6H_2$O and Cu(NO$_3$)$_2$ㆍ $3H_2$O at 1$50^{\circ}C$ for 24 hours and was calcined at $500^{\circ}C$. Each of those was pulverized for 3 and 9 hours in a steel ball mill and was sintered between $700^{\circ}C$ and $1,000^{\circ}C$ for 1 hour, and then their microstructures and magnetic properties were examined. We could make the initial specimens chemically bonded in liquid at the temperature as low as $150 ^{\circ}C$, by using the melting points less than $ 200^{\circ}C$ of the metal nitrates instead of the mechanical ball milling, then narrowed a distance between the particles into a molecular level, and thus lowed sintering temperature by at least $200 ^{\circ}C$ to $300^{\circ}C$ Their initial permeability was 50 to 490 and their saturation magnetic induction density and coercive force 2,400G and 0.3 Oe to 1.2 Oe each, which were similar to those of NiCuZn ferrite synthesized in the conventional process.

• Journal of Korea Technology Innovation Society
• /
• v.12 no.4
• /
• pp.788-818
• /
• 2009

Renewable energy refers to solar energy, biomass energy, hydrogen energy, wind power, fuel cell, coal liquefaction and vaporization, marine energy, waste energy, and liquidity fuel made out of byproduct of geothermal heat, hydrogen and coal; it excludes energy based on coal, oil, nuclear energy and natural gas. Developed countries have recognized the importance of these energies and thus have set the mid to long term plans to develop and commercialize the technology and supported them with drastic political and financial measures. Considering the growing recognition to the field, it is necessary to analysis up-to-now achievement of the government's related projects, in the standards of type of renewable energy, management of sectional goals, and its commercialization. Korean government is chiefly following suit the USA and British policies of developing and distributing renewable energy. However, unlike Japan which is in the lead role in solar rays industry, it still lacks in state-directed support, participation of enterprises and social recognition. The research regarding renewable energy has mainly examinedthe state of supply of each technology and suitability of specific region for applying the technology. The evaluation shows that the research has been focused on supply and demand of renewable as well as general energy and solution for the enhancement of supply capacity in certain area. However, in-depth study for commercialization and the increase of capacity in industry followed by development of the technology is still inadequate. 'Cost-benefit model for each energy source' is used in analysis of technology development of renewable energy and quantitative and macro economical effects of its commercialization in order to foresee following expand in related industries and increase in added value. First, Investment on the renewable energy technology development is in direct proportion both to the product and growth, but product shows slightly higher index under the same amount of R&D investment than growth. It indicates that advance in technology greatly influences the final product, the energy growth. Moreover, while R&D investment on renewable energy product as well as the government funds included in the investment have proportionate influence on the renewable energy growth, private investment in the total amount invested has reciprocal influence. This statistic shows that research and development is mainly driven by government funds rather than private investment. Finally, while R&D investment on renewable energy growth affects proportionately, government funds and private investment shows no direct relations, which indicates that the effects of research and development on renewable energy do not affect government funds or private investment. All of the results signify that although it is important to have government policy in technology development and commercialization, private investment and active participation of enterprises are the key to the success in the industry.