• Journal of Welding and Joining
• /
• v.10 no.3
• /
• pp.40-53
• /
• 1992

고온고압장치(High Temperature and Pressure Vessels)의 적용을 위한 기초연구로서 9Cr-1Mo강 용접부의 연화특성에 대하여 검토하였다. 9Cr-1Mo 강재에 Bead-on-Plate용접을 실시한 후, 용접부의 기계적 성질과 그 현미경조직관찰 및 미세경도를 측정한 결과, As-Welded 및 용접 후열처리(PWHT)등의 조건에 관계없이 용접열향부의 변태역과 템퍼링역의 경계에서 모재의 경 도보다 낮은 경도값(연화역)을 나타내었으며 이러한 원인은 결정립계(Grain boundary)에 석출 되는 탄화물의 형성에 의한 뜨임 현상임이 판명되었다.

• Korean Journal of Plant Resources
• /
• v.27 no.2
• /
• pp.174-182
• /
• 2014

This study was carried out to investigated the effects of soil type and light condition on seedling quality of rare and endemic plants Orostachys iwarenge and Orostachys iwarenge for. magnus. The best seedling quality of O. iwarenge and O. iwarenge for. magnus seedling were shown in Klasmann soil at non-shading or LED (Red+Blue) condition, 50% shading or LED (Red+Blue) condition, respectively. Survival of O. iwarenge seedling was not influenced by the period of experiment but survival of O. iwarenge for. magnus seedling in sandy soil conditions decreased significantly. Results of correlation analysis of seedling quality and survival rate, indicated that O. iwarenge showed a correlation of 0.8 or more at plant height, leaf length and fresh weight. O. iwarenge for. magnus showed a correlation of 0.8 or more at plant height, leaf width and leaf length. Especially, seedling survival of O. iwarenge and O. iwarenge for. magnus showed a correlation of 0.8 or more at first seedling survival and second seedling survival. It was important to manage the early seedling stages of O. iwarenge and O. iwarenge for. magnus. Therefore, seedlings with plant height (over 2.5~4 cm) and root length (over 3~5 cm) were grown vigorously at 35 days after the seedling was transplanted in mid-April in Klasmann soil of 72 plug cell tray at LED (Red+Blue) conditions.

• Journal of Welding and Joining
• /
• v.15 no.1
• /
• pp.92-100
• /
• 1997

Weld repair of ASTM A-470 class 8 high pressure (HP) steam turbine rotor steel has been performed to extend the service life of older fossil units. Microhardness measurements were conducted across the weldment from unaffected base metal (BM) to weld metal (WM). The hardness of the BM was VHN 253, however it dropped up to VHN 227 at the heat affected zone (HAZ) close to unaffected BM for multipass SAW. This area of hardness drop is called "siftening zone" and has a width of 0.5-0.6mm. During creep rupture test, failure occurred around the softening zone and rupture time was 772.4hr at 19Ksi (132 Mpa) and 593.deg. C. Multipass MIG and TIG welding have been employed to reduce the softening zone width. The softening zone width for MIG was 0.3-0.4mm and for TIG was zero-0.4mm depending on heat inputs. However creep rupture time was decreased as softening zone width reduced. Creep rupture time also showed a close relationship with heat inputs in TIG process. The higher heat input, the longer rupture time. Most failure occurred at intercritical HAZ (ICHAZ), however rupture location was shifted to coarse grained HAZ (CGHAZ) as heat input decreased. The rupture surface showed tearing and dimple which indicated transgranular fracture. fracture.

• Elastomers and Composites
• /
• v.42 no.3
• /
• pp.168-176
• /
• 2007

When the rubber vulcanizates reinforced with carbon black or silica are subjected to cyclic loading from its virgin state, the stress required on reloading is less than that on the initial loading. This stress softening phenomenon is referred to as the Mullins effect. The strain energy function of rubber vulcanizates was investigated using theory of pseudo-elasticity incorporated damage parameter that Ogden and Roxburgh have proposed to describe the damage-induced stress softening effect in rubber-like solids. The quasi-static cyclic loading test was performed using the NR-SBR vulcanizates reinforced with carbon black, and then the effect of a damage parameter to stress-strain curve in reloading and subsequent reloading paths was studied. The strain energy function of the rubber vulcanizates with a different filler content was also evaluated.

• Korean Journal of Plant Resources
• /
• v.10 no.4
• /
• pp.397-400
• /
• 1997

The experiment was carried out to determine the optimum fertilization level showing high quality on Aralia cordata Thunb. Plant height of fertilization(27-15-27kg) was promoted significantly compared with conventional fertilization(17-9-17kg). This effect was followed with increment of blanched length. Among underground parts, main root length was increased in conventional fertilization, and more cultural year was prolonged, the more yield of dry root weight was increased. Fresh leaf yield to produce high quality of Aralia cordata plant was remarkably increased about 6% in fertilization of 27-15-27kg per 10a. As a result, to produce higher good quality of the plant. the optimum fertilization level was 27-15-27kg per 10a.

• Tunnel and Underground Space
• /
• v.16 no.6 s.65
• /
• pp.495-505
• /
• 2006

Calculating the distribution of stresses and displacements around a circular tunnel excavated in infinite isotropic rock mass subjected to hydrostatic stress condition is one of the basic problems in rock engineering. While closed-form solutions for the distribution are known if rock masses are considered as elastic, perfectly plastic, or brittle-plastic media, a few numerically approximated solutions based on various simplifying assumptions have been reported for strain-softening rock mass. In this study, a simple numerical method is introduced for the analysis of strain-softening behavior of the circular tunnel in Mohr-Coulomb rock mass. The method can also applied to the analysis of the tunnel in brittle-plastic or perfectly plastic media. For the brittle-plastic case where closed-formsolution exists, the performance of the present method is verified by showing an excellent agreement between two solutions. In order to demonstrate the strain-softening behaviors predicted by the proposed method. a parameter study for a softening index is given and the construction of ground reaction curves is carried out. The importance of defining the characteristics of dilation in plastic analysis is discussed through analyzing the displacements near the surface of tunnel.

• Journal of Chest Surgery
• /
• v.39 no.8 s.265
• /
• pp.643-647
• /
• 2006

Congenital tracheomalacia associated esophageal atresia is a rare foregut anomaly. We report a case of 40-day old male infant with tracheomalacia who has undergone repair of esophageal atresia at his age of 1 day. The patient had progressive dyspnea and stridor after repair of esophageal atresia. His 3-dimensional chest computed tomography showed severe stenosis at the middle of trachea. We underwent resection and end-to-end anastomosis under cardiopulmonary bypass. Histologic examination revealed esophageal tissues indicating congenital origin as well as no cartilage.

• Journal of Welding and Joining
• /
• v.8 no.4
• /
• pp.69-75
• /
• 1990

In this paper, ultimate compressive strength of TMCP 50HT steel plates (yield stress .sigma.$_{o}$=36kg/mm$^{2}$) with HAZ softening is studied. Finite element method formulated by the author is applied to analyze the elasto-plastic large deflection behaviour of the plates. The influence of HAZ softening breadth, welding direction and slenderness ratio on the ultimate compressive strength is investigated. The results obtained are summarized as 1) With the increasing of the HAZ softening breadth, early plasticity on the plates is formed and then the ultimate compressive strength is decreased, in which about 8% of the ultimate strength for the plate with h/t=4(h: HAZ softening breadth, t: plate thickness) was reduced comparing with no HAZ softening. 2) The large decrease of the ultimate strength for the case that the welding direction is normal to the loading direction is occurred than the case that the welding direction is parallel to the loading direction. 3) The influence of HAZ softening on the ultimate compressive strength is serious for thick plates, while it may be negligible for thin plates.s.

• Journal of Welding and Joining
• /
• v.8 no.3
• /
• pp.79-88
• /
• 1990

Welded joint often contains soft or softened regions such as the HAZ of TMCP steel welded with high heat input. In this study, the equivalent yield strength of plate structure containing softened region was predicted by FEM analysis, and its incremental behavior was explained with the results of the analysis. The calculated results of yield strength indicated the following for the plate structures. 1) As the softened region starts to yield, shear stress begins to build up along the boundary between base metal and softened region. This results in multi-axial stress condition which gives restraint on the softened region. 2) Restraint effect has a significant influence on the distribution of the shear stress, the nominal stress, and the strain. 3) The yielding behavior of softened region becomes the same as that of base metal when both ratios of length to width and thickness to width of softened region are larger than 30 and 13 respectively.

• Proceedings of the KWS Conference
• /
• 1998.10a
• /
• pp.80-82
• /
• 1998