• Journal of Bio-Environment Control
• /
• v.25 no.3
• /
• pp.153-161
• /
• 2016

This study aims to determine the optimal maturity of strawberry fruits as affected by the application of lysophosphatidylethanolamine (LPE) and its optimal concentration for postharvest stability and quality. Prior to application of treatments, fruits that were classified into levels of maturity (0%, 50%, 70% and 100%) were air-dried for 40 minutes and stored in the refrigerator at $4^{\circ}C$ for 12 days. Fruits at 70% maturity were dipped into 0, 10, 50 and $100mg{\cdot}L^{-1}$ LPE solutions for 1 minute. A lower range of concentration (0, 2.5, 5, 10 and $25mg{\cdot}L^{-1}$) was applied to fruits at different maturity levels. Data on fresh weight, hardness at vertical and horizontal loading positions, color index and sugar content during storage were collected. Based on fruits with 70% maturity dipped in LPE concentrations, there were no significant differences found on fresh weight, color index and sugar content. However, the application of $10mg{\cdot}L^{-1}$ LPE gave the highest hardness at vertical loading position while $100mg{\cdot}L^{-1}$ had the lowest average. At lower range of LPE concentrations, fresh weight was not significantly affected by LPE application and maturity levels. Hardness of fruits was mainly based on the maturity of the fruits. Increased hardness was observed in the fruits with 70% maturity dipped into the $5mg{\cdot}L^{-1}$ of LPE solution. The hardness and Hunter's $L^*$ and $b^*$ value of 100% matured fruits gave lowest values despite the application of $25mg{\cdot}L^{-1}$ LPE 12 days after storage.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.1-40
• /
• 1973

There is a general tendency to increase nitrogen level in rice production to insure an increased yield. On the other hand, percentage of ripened grains is getting decreased with such an increased fertilizer level. Decreasing of the percentage is one of the important yield limiting factors. Especially the newly developed rice variety, 'Tongil' is characterized by a relatively low percentage of ripened grains as compared with the other leading varieties. Therefore, these studies were aimed to finding out of some measures for the improvement of ripening in rice. The studies had been carried out in the field and in the phytotron during the period of three years from 1970 to 1972 at the Crop Experiment Station in Suwon. The results obtained from the experiments could be summarized as follows: 1. The spikelet of Tongil was longer in length, more narrow in width, thinner in thickness, smaller in the volume of grains and lighter in grain weight than those of Jinheung. The specific gravity of grain was closely correlated with grain weight and the relationship with thickness, width and length was getting smaller in Jinheung. On the other hand, Tongil showed a different pattern from Jinheung. The relationship of the specific gravity with grain weight was the greatest and followed by that with the width, thickness and length, in order. 2. The distribution of grain weight selected by specific gravity was different from one variety to another. Most of grains of Jinheung were distributed over the specific gravity of 1.12 with its peak at 1.18, but many of grains of Tongil were distributed below 1.12 with its peak at 1.16. The brown/rough rice ratio was sharply declined below the specific gravity of 1.06 in Jinheung, but that of Tongil was not declined from the 1.20 to the 0.96. Accordingly, it seemed to be unfair to make the specific gravity criterion for ripened grains at 1.06 in the Tongil variety. 3. The increasing tendency of grain weight after flowering was different depending on varieties. Generally speaking, rice varieties originated from cold area showed a slow grain weight increase while Tongil was rapid except at lower temperature in late ripening stage. 4. In the late-tillered culms or weak culms, the number of spikelets was small and the percentage of ripened grains was low. Tongil produced more late-tillered culms and had a longer flowering duration especially at lower temperature, resulting in a lower percentage of ripened grains. 5. The leaf blade of Tongil was short, broad and errect, having light receiving status for photosynthesis was better. The photosynthetic activity of Tongil per unit leaf area was higher than that of Jinheung at higher temperature, but lower at lower temperature. 6. Tongil was highly resistant to lodging because of short culm length, and thick lower-internodes. Before flowering, Tongil had a relatively higher amount of sugars, phosphate, silicate, calcium, manganese and magnesium. 7. The number of spikelets of Tongil was much more than that of Jinheung. The negative correlation was observed between the number of spikelets and percentage of ripened grains in Jinheung, but no correlation was found in Tongil grown at higher temperature. Therefore, grain yield was increased with increased number of spikelets in Tongil. Anthesis was not occurred below 21$^{\circ}C$ in Tongil, so sterile spikelets were increased at lower temperature during flowering stage. 8. The root distribution of Jinheung was deeper than that of Tongil. The root activity of Tongil evaluated by $\alpha$-naphthylamine oxidation method, was higher than that of Jinheung at higher temperature, but lower at lower temperature. It is seemed to be related with discoloration of leaf blades. 9. Tongil had a better light receiving status for photosynthesis and a better productive structure with balance between photosynthesis and respiration, so it is seemed that tongil has more ideal plant type for getting of a higher grain yield as compared with Jinheung. 10. Solar radiation during the 10 days before to 30 days after flowering seemed enough for ripening in suwon, but the air temperature dropped down below 22$^{\circ}C$ beyond August 25. Therefore, it was believed that air temperature is one of ripening limiting factors in this case. 11. The optimum temperature for ripening in Jinheung was relatively lower than that of Tongil requriing more than $25^{\circ}C$. Air temperature below 21$^{\circ}C$ was one of limiting factors for ripening in Tongil. 12. It seemed that Jinheung has relatively high photosensitivity and moderate thermosensitivity, while Tongil has a low photosensitivity, high thermosensitivity and longer basic vegetative phase. 13. Under a condition of higher nitrogen application at late growing stage, the grain yield of Jinheung was increased with improvement of percentage of ripened grains, while grain yield of Tongil decreased due to decreasing the number of spikelets although photosynthetic activity after flowering was. increased. 14. The grain yield of Jinheung was decreased slightly in the late transplanting culture since its photosynthetic activity was relatively high at lower temperature, but that of Tonil was decreased due to its inactive photosynthetic activity at lower temperature. The highest yield of Tongil was obtained in the early transplanting culture. 15. Tongil was adapted to a higher fertilizer and dense transplanting, and the percentage of ripened grains was improved by shortening of the flowering duration with increased number of seedlings per hill. 16. The percentage of vigorous tillers was increased with a denser transplanting and increasing in number of seedlings per hill. 17. The possibility to improve percentage of ripened grains was shown with phosphate application at lower temperature. The above mentioned results are again summarized below. The Japonica type leading varieties should be flowered before August 20 to insure a satisfactory ripening of grains. Nitrogen applied should not be more than 7.5kg/10a as the basal-dressing and the remained nitrogen should be applied at the later growing stage to increase their photosynthetic activity. The morphological and physiological characteristics of Tongil, a semi-dwarf, Indica $\times$ Japonica hybrid variety, are very different from those of other leading rice varieties, requring changes in seed selection by specific gravity method, in milling and in the cultural practices. Considering the peculiar distribution of grains selected by the method and the brown/rough rice ratio, the specific gravity criterion for seed selection should be changed from the currently employed 1.06 to about 0.96 for Tongil. In milling process, it would be advisable to bear in mind the specific traits of Tongil grain appearance. Tongil is a variety with many weak tillers and under lower temperature condition flowering is delayed. Such characteristics result in inactivation of roots and leaf blades which affects substantially lowering of the percentage of ripened grains due to increased unfertilized spikelets. In addition, Tongil is adapted well to higher nitrogen application. Therefore, it would be recommended to transplant Tongil variety earlier in season under the condition of higer nitrogen, phosphate and silicate. A dense planting-space with three vigorous seedlings per hill should be practiced in this case. In order to manifest fully the capability of Tongil, several aspects such as the varietal improvement, culural practices and milling process should be more intensively considered in the future.he future.

• Journal of the Korean Geographical Society
• /
• v.30 no.3
• /
• pp.269-295
• /
• 1995

This research is concerned with the social division of labor within the traditional industry district: Damyang bamboo ware industry district and Yeoju pottery industry district in South Korea, Damyang bamboo ware and Yeoju pottery are well known of the Korean traditional industry. The social division of labor in an industry district is considered as an important factor. The social division of labor helps the traditional industry to survive today. This summary shows five significant points from the major findings. First, Damyang bamoo ware industry and Yoeju pottery industry have experienced the growth stages until 1945, the stagnation in the 1960s, and the business recovery in the 1980s. Most Korean traditional industries had been radically declined under the Japanese colonization; while, Damyang bamboo ware industry and Yeoju pottery industry district have been developed during above all stages. The extended market to Japan helped the local government to establish a training center, and to provide financial aids and technical aids to crafts men. During the 1960s and 1970s, mass production of substitute goods on factory system resulted in the decrease of demand of bamboo ware and pettery. During the 1980s, these industries have slowly recovered as a result of the increased income per capita. The high rate of economic growth in the 1960s and 1970s was playing an important role in the emerging the incleased demand of the bamboo ware and pottery. Second the production-and-marketing system in a traditional industry district became diversified to adjust the demand of products. In Damyang bamboo ware industry district, the level of social division of labor was low until the high economic development period. Bamboo ware were made by a farmer in a small domestic system, The bamboo goods were mainly sold in the periodic market of bamboo ware in Damyang. In the recession period in the 1960s and 1970s, the production-and-marketing system were diversified; a manufacturing-wholesale type business and small-factory type business became established; and the wholesale business and the export traders in the district appeared. In the recovery period in the 1980s, the production-and-marketing systems were more diversified; a small-factory type business started to depend On subcontractors for a part of process of production; and a wholesale business in the district engaged in production of bamboo ware. In Yeoju pottery industry district, the social division of labor was limited until the early 1970s. A pottery was made by a crafts man in a small-business of domestic system and sold by a middle man out of Yeoju. Since the late 1970s, production-and-marketing system become being diversified as a result of the increased demand in Japan and South Korea. In the 1970s, Korean traditional craft pottery was highiy demanded in Japan. The demand encouraged people in Yoeju to become craftsmen and/or to work in the pottery related occupation. In South Korea, the rapid economic growth resulted in incline to pottery due to the development of stainless and plastic bowls and dishes. The production facilities were modernized to provide pottery at the reasonable price. A small-busineas of domestic system was transformed into a small-factory type business. The social division of labor was intensified in the pottery production-and-maketing system. The manufacturing kaoline began to be seperated from the production process of pottery. Within the district, a pottery wholesale business and a retail business started to be established in the 1980s. Third the traditional industry district was divided into "completed one" and "not-completed one" according to whether or not the district firms led the function of the social division of labor. The Damyang bamboo ware industry district is "completed one": the firm within the district is in charge of the supply of raw material, the production and the marketing. In the Damyang bamboo ware district, the social division of labor w and reorganized labor system to improve the external economics effect through intensifying the social division of labor. Lastly, the social division of labor was playing an important role in the development of traditional industry districts. The subdivision of production process and the diversification of business reduced the production cost and overcame the labor shortage through hiring low-waged workers such as family members, the old people and housewives. An enterpriser with small amount of capital easily joined into the business. The risk from business recession were dispersed. The accumulated know-how in the production and maketing provided flexiblility to produce various goods and to extend the life-cycly of a product.d the life-cycly of a product.

• Radiation Oncology Journal
• /
• v.20 no.1
• /
• pp.41-52
• /
• 2002

Purpose : 3D conformal radiotherapy, the optimum dose delivered to the tumor and provided the risk of normal tissue unless marginal miss, was restricted by organ motion. For tumors in the thorax and abdomen, the planning target volume (PTV) is decided including the margin for movement of tumor volumes during treatment due to patients breathing. We designed the respiratory gating radiotherapy device (RGRD) for using during CT simulation, dose planning and beam delivery at identical breathing period conditions. Using RGRD, reducing the treatment margin for organ (thorax or abdomen) motion due to breathing and improve dose distribution for 3D conformal radiotherapy. Materials and Methods : The internal organ motion data for lung cancer patients were obtained by examining the diaphragm in the supine position to find the position dependency. We made a respiratory gating radiotherapy device (RGRD) that is composed of a strip band, drug sensor, micro switch, and a connected on-off switch in a LINAC control box. During same breathing period by RGRD, spiral CT scan, virtual simulation, and 3D dose planing for lung cancer patients were peformed, without an extended PTV margin for free breathing, and then the dose was delivered at the same positions. We calculated effective volumes and normal tissue complication probabilities (NTCP) using dose volume histograms for normal lung, and analyzed changes in doses associated with selected NTCP levels and tumor control probabilities (TCP) at these new dose levels. The effects of 3D conformal radiotherapy by RGRD were evaluated with DVH (Dose Volume Histogram), TCP, NTCP and dose statistics. Results : The average movement of a diaphragm was 1.5 cm in the supine position when patients breathed freely. Depending on the location of the tumor, the magnitude of the PTV margin needs to be extended from 1 cm to 3 cm, which can greatly increase normal tissue irradiation, and hence, results in increase of the normal tissue complications probabiliy. Simple and precise RGRD is very easy to setup on patients and is sensitive to length variation (+2 mm), it also delivers on-off information to patients and the LINAC machine. We evaluated the treatment plans of patients who had received conformal partial organ lung irradiation for the treatment of thorax malignancies. Using RGRD, the PTV margin by free breathing can be reduced about 2 cm for moving organs by breathing. TCP values are almost the same values $(4\~5\%\;increased)$ for lung cancer regardless of increasing the PTV margin to 2.0 cm but NTCP values are rapidly increased $(50\~70\%\;increased)$ for upon extending PTV margins by 2.0 cm. Conclusion : Internal organ motion due to breathing can be reduced effectively using our simple RGRD. This method can be used in clinical treatments to reduce organ motion induced margin, thereby reducing normal tissue irradiation. Using treatment planning software, the dose to normal tissues was analyzed by comparing dose statistics with and without RGRD. Potential benefits of radiotherapy derived from reduction or elimination of planning target volume (PTV) margins associated with patient breathing through the evaluation of the lung cancer patients treated with 3D conformal radiotherapy.

• Korean Journal of Weed Science
• /
• v.3 no.1
• /
• pp.75-99
• /
• 1983

The herbicidal properties of perfluidone [1,1,1-trifluoro-N-2-methyl-4-(phenylsulponyl) phenyl methanesulfonamide] were investigated in pots and paddy fields. At the rate of 2.0kg prod./10a, perfluidone did not cause any injury to the 4 leaf stage (LS) rice seedlings. Although the crop injury increased with increasing the application rate, the injury caused by 16kg prod. perfluidone/10a gave rise to only 30% yield reduction. The crop injury was greatest when perfluidone was applied 2 days before transplanting and decreased as the application time delayed. Perfluidone showed greater crop injury to the 3 LS seedlings, at more than 7cm water depth, and at high temperature than to the 4 LS seedlings, at 3-5cm water depth, and at low temperature. Indica and indica ${\times}$ japonica rice varieties were generally more sensitive to perfluidone than japonica rice variety. Perfluidone effectively controlled most of annual weeds and such perennial weeds as Sagittaria pygmaea MIQ., Potamogeton distinctus A. BENN, Cyperus serotinus ROTTB, Scirpus maritimus L., Eleocharis kuroguwai OHWL, and Scirpus hotarui OHWL, whereas Sagittaria trifolia L. and Polygonum hydropiper SPACH. were tolerent to perfluidone. The weeding effect decreased with increasing the leaching amount of water and the overflowing of irrigated water within 24 hours after the herbicide application. When the application time was done later than 8 days after transplanting, the perennial weeds were shown at deeper soil layers, and the standing water was deeper than 7cm, the effect tended to decrease. However, there was no difference in the weeding effect between soil types. Downward movement of perfluidone in flooded soil ranged from 2 to 8cm deep. The movement increased with increasing the leaching amount of water and the application rate and at a sandy loam soil which possessed less adsorptive capacity. Residual effect of perfluidone was found at 35 to 80 days after application, which varied such factors as Soil types. Increase in the leaching amount of water resulted in decrease in the period of the residual effect. The period was shorter at non-sterilized soil than at sterilized soil. The 0.75kg ai perfluidone + 1.5kg ai SL-49 (1,3-dimethyl-6-(2,4-dichlor-benzoyl)-5-phenacyloxy-pyrazole)/ha and 1.5kg ai perfluidone + 1.05kg ai bifenox (2,4-dichlorophenyl-3-methoxy carbonyl-4-nitro phenyl ether)/ha showed less crop injury than 1.5kg ai/ha perfluidone alone. However, the weeding effect of the former was similar to that of the later.

• Radiation Oncology Journal
• /
• v.13 no.4
• /
• pp.331-338
• /
• 1995

Purpose : To evaluate our clinical experience with the combination of teletherapy and intraluminal brachytherapy in patients with unresectable or inoperable esophageal cancers. Materials and Methods : From Nov 1989 to Mar 1993, twenty patients with esophageal cancer were treated with radical radiotherapy and intraluminal brachytherapy at Yonsei Cancer Center. All patients had squamous histolgy and stage distribution was as follows: stage II, 4($20{\%}$)patients; III, 15 ($75{\%}$)patients; IV, 1($5{\%}$)patients. A dose of S-12Gy/1-3weeks with intraluminal brachytherapy (3-5Gy/fraction) to 5mm from the outside of the esophageal tube using high dose rate Iridium-192 remotely afterloading brachytherapy machine was given 2 weeks after a total dose of 59-64Gy with external radiotherapy. Induction chemotherapy using cisplatin and 5-FU was performed in 13 patients with median 3 cycles(1-6 cycles), Response rate, local control rate, survival and complications were analysed retrospectively. Results : Two-year overall survival rate and median survival were $15.8{\%}$ and 13.5 months. Response rates were as follows complete remission(CR) 5($25{\%}$): partial remission a(PRa) 7($35{\%}$): partial remission b(PRb) 7($35{\%}$), no response(NR) 1($5{\%}$). Patterns of failure were as follows; local failure 13($65{\%}$), local and distant failure 3($15{\%}$), distant failure 0($0{\%}$). Ultimate local control rate was $20{\%}$. Treatment related complications included esophageal ulcer in two patients and esophageal stricture in one. Conclusion : Though poor local conrol rate, median survival was improved as compared with previous results of radiation therapy alone(8months) and chemoradiation combined treatment(11 months) in Yonsei Cancer Center High-dose-rate intraluminal brachytherapy following external irradiation is an effective treatment modality with acceptable toxicity in esophageal cancer.

• Economic and Environmental Geology
• /
• v.12 no.3
• /
• pp.147-176
• /
• 1979

The Yeonhwa II zinc-lead mine is characterized by a dozen of moderately dipping tabular orebodies of skarn and zinc-lead sulfides, developed in accordance with the ENE-trending bedding thrusts and bedding planes of the Pungchon Limestone and underlying Myobong Formation, mostly along the contacts of a ENE-trending sill and a NW-trending dike of quartz mononite porphyry. The orebodies occur in three groups: (1) the footwall Wolgok orebodies with respect to the sill, (2) the hangingwall Wolgok orebodies, and (3) the Seongok orebodies extended from dike contacts into carbonate beds. Mineral compositions of these orebodies are dominated by calc-silicates (skarn) associated with ore minerals of sphalerite, galena, and chalcopyrite, as well as sulfide gangue of pyrrhotite. A pair of exo- and endo-skerns in the Wolgok footwall contact aureole between the Pungchon Limestone and quartz monzonite porphyry on the -120 level represents a well-developed symmetrical pattern of mineral zoning: a garnet/quartz zone in the center of exoskarn, two zones of pyroxene with ore minerals on both sides of the garnet/quartz zone, further outwards-an epidote/chlorite-bearing hornfelsic zone in the Myobong slate beyond a zone of unaffected limestone, and an epidote-dominated zone of endo skarn on the opposite side toward fresh quartz monzonite porphyry. These features indicate a combination of two effects on the skarn formation: (1) differences in composition of the host rocks(sedimentary and ignous), and (2) progressive outward migration of inner zones on outer zones on the course of metasomatic replacement of the pre-existing minerals. Microprobe analyses of garnet, pyroxene, pyroxenoids, epidote, and chlorite for nine major elements on a total of 23 mineral grains revealed that: the pyroxenes are hedenbergitic, in most zones, with a gradual decrease of Fe- and Mn-contents toward the central zone, whereas the garnets are andraditic in outer zones, but are grossularitic in the central zone. This indicates a reverse relationship of Fe-contents between pyroxene and garnet across the exoskarn zones. Pyroxenoids are lacking in wollastonite but are dominated by pyroxmangite, rhodonite and bustamite, indicating a Mn-rich nature in bulk chemistry. Pseudomorphic fluorite after garnet occurs abundantly reflecting a fluorine-enhanced evidence of the skarn-forming fluids. Epidote contains 0.19-0.25mole fraction of pistacite, and chlorite is Mn-rich but is Mg-poor. Sulfide mineralization took place with the most Fe-rich pyroxene rather than with garnet as indicated by the fact that the highest value of hedenbergite mole fraction occurs in the ore-bearing pyroxene zone. The Yeonhwa II ores are characterized by high zinc and low lead in metal grade, with minor quantity of copper content in almost constant grade. The hangingwall Wolgok and Seongok orebodies, that formed in a more open environment with respect to their local configurations of geologic setting, are more variable in metal grades and ratios, than are the footwall Wolgok orebodies formed in a more closed condition in a narrow interval of sedimentary beds.

• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.2
• /
• pp.171-178
• /
• 2016

Purpose : In order to minimize the dose of femoral head as an appropriate treatment plan for rectal cancer radiation therapy, we compare and evaluate the usefulness of 3-field 3D conformal radiation therapy(below 3fCRT), which is a universal treatment method, and 5-field 3D conformal radiation therapy(below 5fCRT), and Volumetric Modulated Arc Therapy (VMAT). Materials and Methods : The 10 cases of rectal cancer that treated with 21EX were enrolled. Those cases were planned by Eclipse(Ver. 10.0.42, Varian, USA), PRO3(Progressive Resolution Optimizer 10.0.28) and AAA(Anisotropic Analytic Algorithm Ver. 10.0.28). 3fCRT and 5fCRT plan has $0^{\circ}$, $270^{\circ}$, $90^{\circ}$ and $0^{\circ}$, $95^{\circ}$, $45^{\circ}$, $315^{\circ}$, $265^{\circ}$ gantry angle, respectively. VMAT plan parameters consisted of 15MV coplanar $360^{\circ}$ 1 arac. Treatment prescription was employed delivering 54Gy to recum in 30 fractions. To minimize the dose difference that shows up randomly on optimizing, VMAT plans were optimized and calculated twice, and normalized to the target V100%=95%. The indexes of evaluation are D of Both femoral head and aceta fossa, total MU, H.I.(Homogeneity index) and C.I.(Conformity index) of the PTV. All VMAT plans were verified by gamma test with portal dosimetry using EPID. Results : D of Rt. femoral head was 53.08 Gy, 50.27 Gy, and 30.92 Gy, respectively, in the order of 3fCRT, 5fCRT, and VMAT treatment plan. Likewise, Lt. Femoral head showed average 53.68 Gy, 51.01 Gy and 29.23 Gy in the same order. D of Rt. aceta fossa was 54.86 Gy, 52.40 Gy, 30.37 Gy, respectively, in the order of 3fCRT, 5fCRT, and VMAT treatment plan. Likewise, Lt. Femoral head showed average 53.68 Gy, 51.01 Gy and 29.23 Gy in the same order. The maximum dose of both femoral head and aceta fossa was higher in the order of 3fCRT, 5fCRT, and VMAT treatment plan. C.I. showed the lowest VMAT treatment plan with an average of 1.64, 1.48, and 0.99 in the order of 3fCRT, 5fCRT, and VMAT treatment plan. There was no significant difference on H.I. of the PTV among three plans. Total MU showed that the VMAT treatment plan used 124.4MU and 299MU more than the 3fCRT and 5fCRT treatment plan, respectively. IMRT verification gamma test results for the VMAT plan passed over 90.0% at 2mm/2%. Conclusion : In rectal cancer treatment, the VMAT plan was shown to be advantageous in most of the evaluation indexes compared to the 3D plan, and the dose of the femoral head was greatly reduced. However, because of practical limitations there may be a case where it is difficult to select a VMAT treatment plan. 5fCRT has the advantage of reducing the dose of the femoral head as compared to the existing 3fCRT, without regard to additional problems. Therefore, not only would it extend survival time but the quality of life in general, if hospitals improved radiation therapy efficiency by selecting the treatment plan in accordance with the hospital's situation.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.1
• /
• pp.5-37
• /
• 1982

Plywood used for construction as a decorative inner material is inflammable to bring large fire accidents and burn out human life and their properties. To diminish the fire disaster, fire retardant plywood has been required indeed. In the methods of manufacturing the fire retardant plywood the soaking method is occasionally used. However after soaking plywood into fire retardant chemical solutions, redrying of soaked plywood is the most important. In this study, 3.5mm thin and 5.0mm thick plywoods were selected for fire retardant treatment. Treating solutions were prepared for 20% dilute solutions of ammonium sulfate, monoammonium phosphate, diammonium phosphate, borax-boric acid and minalith, and water solution. 1-, 3-, 6-, and 9 hour-soaking treatments were applied and after treatments hot plate drying was applied to those treated plywoods at $90^{\circ}C$, $120^{\circ}C$ and $150^{\circ}C$, of press temperature. Drying rates, drying curves, water absorption rates of fire retardant chemicals, weight per volume and fire retardant degree of plywood were investigated. The results may be summarized as follows: 1. The plywoods treated with ammonium sulfate, monoammonium phosphate and diammonium phosphate and diammonium phosphate showed increase of chemical absorption rate with proportion to increase of treating time, but not in case of the plywood treated with borax-boric acid and minalith. 2. In the treatment of definite time, the absorption rate per unit of volume of plywood showed higher in thin plywood (thickness of 3.5mm) than in thick plywood (thickness of 5.0mm). In both thin and thick plywoods, the highest absorption rate was observed in 9 hour-treatment of ammonium sulfate. The value was 1.353kg/$(30cm)^3$ in thin plywood and 1.356kg/$(30cm)^3$ in thick plywood. 3. The volume per weight of plywood after chemical treatment increased remarkably and. after hot plate drying, the values were to a little extent higher than before chemical treatment. 4. The swelling rates of thickness in chemical-treated plywoods increased similarly with that of water-treated plywood in 1- and 3 hour-treatment of both thin and thick plywoods. But in 6- and 9 hour-treatment, the greater increased value showed in water-treated ply wood than any other chemical, especially in thick plywood. 5. The shrinkage rates after hot plate drying showed the same tendency as the swelling rate, and the rate showed the increasing tendency with proportion to increase of treating time in thick plywood of both chemical and water treatments. 6. Among drying curves, the curves of water-treated plywood placed more highly than chemical-treated plywood without-relation to thickness in 6- and 9 hour-treatment except in 1- and 3 hour-treatment. 7. The drying rate related to thickness of treated plywood, was twice above in thin plywood compared with thick plywood. 8. The drying rate remarkably increased with proportion to increase of the plate temperature and, the values were respectively 1.226%/min., 6.540%/min., 25.752%/min. in hot plate temperature of $90^{\circ}C$, $120^{\circ}C$, $150^{\circ}C$ in thin plywood and 0.550%/min., 2.490%/min, 8.187%/min, in hot plate temperature of $90^{\circ}C$, $120^{\circ}C$, $150^{\circ}C$ in thick plywood. 9. In the treatment at $120^{\circ}C$ of hot plate temperature, the drying rates of chemical-treated plywood showed the highest value in monoammonium phosphate of thin plywood and in diammonium phosphate of thick plywood. But the drying rate of water-treated plywood was highest in 6- and 9 hour-treatment. 10. The fire retardant degree of chemical-treated plywood was higher than that of the untreated plywood as shown in loss of weight, burning time, flame-exhausted time and carbonized area. 11. The fire-retardant effect among fire retardant chemicals were the greatest in diammonium phosphate, the next were in monoammonium phosphate and ammonium sulfate, and the weakest were in borax-boric and minalith.

• The Korean Nurse
• /
• v.20 no.4 s.112
• /
• pp.27-38
• /
• 1981

오늘 저희에게 주어진 주제, 내일에 타당한 간호사업 및 간호교육의 향방을 어떻게 정하여야 하는가의 논의는 오늘날 간호계 주변에 일어나고 있는 변화의 실상을 이해하는 데서 비롯되어져야 한다고 생각하는 입장에서 먼저 세계적으로 건강관리사업이 당면한 딜레마가 어떠한 것이며 이러한 문제해결을 위해 어떠한 새로운 제안들이 나오고 있는가를 개관 하므로서 그 교육적 의미를 정의해 보고 장래 간호교육이 지향해야할 바를 생각해 보려 합니다. 오늘의 사회의 하나의 특징은 세계 모든 나라들이 각기 어떻게 전체 국민에게 고루 미칠 수 있는 건강관리체계를 이룩할 수 있느냐에 관심을 모으고 있는 사실이라고 봅니다. 부강한 나라에 있어서나 가장 빈궁한 나라에 있어서나 그 관심은 마찬가지로 나타나고 있읍니다. 보건진료 문제의 제기는 발달된 현대의학의 지식과 기술이 지닌 건강관리의 방대한 가능성과 건강 관리의 요구를 지닌 사람들에게 미치는 실질적인 혜택간에 점점 더 크게 벌어지는 격차에서 발생한다고 봅니다. David Rogers는 1960년대 초반까지 갖고 있던 의료지식의 축적과 민간인의 구매력 향상이 자동적으로 국민 건강의 향상을 초래할 것이라고 믿었던 순진한 꿈은 이루어지지 않았고 오히려 의료사업의 위기는 의료지식과 의료봉사간에 벌어지는 격차와 의료에 대한 막대한 투자와 그에서 얻는 건강의 혜택간의 격차에서 온다고 말하고 있읍니다. 균등 분배의 견지에서 보면 의료지식과 기술의 향상은 그 단위 투자에 대한 생산성을 낮춤으로서 오히려 장애적 요인으로 작용해온 것도 사실이고 의료의 발달에 따른 일반인의 기대 상승과 더불어 의료를 태성의 권리로 규명하는 의료보호사업의 확대로 야기되는 의료수요의 급증은 모두 기존 시설 자원에 압박을 초래하여 전래적 의료공급체제에 도전을 가해 왔으며 의료의 발달에 건 기대와는 달리 인류의 건강 문제 해결은 더욱 요원한 과제로 남게 되었읍니다. 현시점에서 세계인구의 건강문제는 기아, 영양실조, 안전한 식수 공급 및 위생적 생활환경조성의 문제에서부터 가장 정밀한 의료기술발달에 수반되는 의료사회문제에 이르는 다양한 문제를 지니고 있으며 주로 각개 국가의 경제 사회적 여건이 이 문제의 성격을 결정짓고 있다고 볼수 있읍니다. 그러나 건강 관리에 대한 요구는 영구히, 완전히 충족될 수 없는 요구에 속한다는 의미에서 경제 사회적 발달 수준에 상관없이 모든 국가가 공히 요구에 미치지 못하는 제한된 자원문제로 고심하고 있는 실정입니다. 또 하나의 공통된 관점은 각기 문제의 상황은 달라도 오늘날의 건강 문제는 주로 의료권 밖의 유전적 소인, 사회경제적, 정치문화적인 환경여건과 각기 선택하는 삶의 스타일에 깊이 관련되어 있다는 사실입니다. 따라서 오늘과 내일의 건강관리 문제는 의학적 견지에서 뿐 아니라 널리 경제, 사회, 정치, 문화적 관점에서 포괄적인 접근이 시도되어야 한다는 점과 의료의 고급화, 전문화, 일변도의 과정에서 소외되었던 기본건강관리체계 강화에 역점을 둔 다양하고 탄력성 있는 사업전개가 요구되고 있다는 점입니다. 다양한 건강관리요구에 적절히 대처할 수 있기 위한 그간 세계 각처에서 시도된 새로운 건강관리 접근과 그 제안을 살펴보면 대체로 4가지의 뚜렷한 성격들로 집약할 수 있을 것 같습니다. 그 첫째는 건강관리사업계획 및 그 수행에 있어 지역 사회의 적극적 참여를 유도하는 일, 둘째는 지역단위의 일차보건의료에서 부터 도심지 신예 종합병원, 시설 의료에 이르기까지 건강관리사업을 합리적으로 체계화하는 일. 셋째로 의료인력이용의 효율화 및 비의료인의 훈련과 협조 유발을 포함하는 효과적인 인력관리에 대한 제안과 넷째로 의료보험 및 각양 집단 의료유형을 포함하는 대체 의료재정 운영관리에 관련된 제안들을 들 수 있읍니다. 건강관리사업에 있어 지역사회 참여의 의의는 첫째로 사회 경제적인 제약이 모든 사람에게 가능한 최대한의 의료를 모두 고루 공급하기 어렵게 하고 있다는 점에서 제한된 정부재정과 지역사회가용자원을 보다 효율적으로 이용할 수 있게 하는 자조적이고 자율적인 지역사회건강관리체제의 구현에 있다고 볼 수 있으며 둘때로는 개인과 가족 및 지역민의 건강에 영향하는 많은 요인들은 실질적으로 의료권 외적 요인들로서 위생적인 생활양식, 식사습관, 의료시설이용 등 깊이 지역사회특성과 관련되어 국민보건의 실질적 향상을 위하여는 지역 주민의 자발적인 참여가 필수여건이 된다는 점 입니다. 지역 단위별 체계적인 의료사업의 전개는 제한된 의료자원의 보다 합리적이고 효율적인 이용을 가능하게 하며 요구가 있을때 언제나 가까운 거리에서 경제 사회적 제약을 받지 않고 이용할 수 있는 일차건강관리망을 통하여 건강에 관련된 정보를 얻으며 질병예방, 건강증진 및 기초적인 진료의 도움을 얻을 수 있고 의뢰에 대한 제2차, 제3차 진료에의 길은 건강관리사업의 질과 폭을 동시에 높고 넓게 해 줄 수 있는 길이 된다는 것입니다. 인력 관리에 관련된 두가지 기본 방향으로서는 첫째로 기존보건의료인력의 적정배치 유도이고 둘째는 기존인력의 역할확대, 조정 및 비의료인의 교육훈련과 부분적 업무대체를 들수 있으며 이러한 인력관리의 기본 방향은 부족되는 의료인력의 생산성을 높이고 주민들의 자조적 능력을 강화시킨다는 데에 두고 있음니다. 대체적 의료재정운영안은 대체로 의료공급과 재정관리를 이원화하여 주민의 경제능력이 의료수혜의 장애요소로 작용함을 막고 의료인의 경제적 동기에 의한 과잉치료처치에 의한 낭비를 줄임으로써 의료재정의 투자의 효과를 증대하는 데(cost-effectiveness) 그 기본방향을 두고 있다고 봅니다. 이러한 주변의료 사회적인 동향이 간호교육의 미래상에 끼치는 영향은 지대한 것이라 봅니다. 첫째로 장래 세계인구의 건강문제는 정치, 사회, 경제, 환경적인 의료권 밖의 요인들에 의해 더욱 크게 영향 받는다고 전제한다면 건강문제해결에 있어서도 전통적인 의료사업의 접근에서 더나아가 문제발생의 근원이 되는 생활개선이라는 차원에서 포괄적 접근을 생각하여야 하고 이를 위해선 정치, 경제, 사회전반에 걸친 깊이있는 이해과 주민의 생활환경에 직접 영향하는 교통수단, 통신망 mass media, 전력문제, 농업경영방법 및 조직적 사회활동 등 폭넓은 이해가 요구된다고 봅니다. 둘째로, 지역사회참여의 의의를 인정한다면 지역민의 자발적 참여를 효과적으로 유발시킬수 있고 의료집단과 각종 주민조직과 일반주민들 사이에서 협조적으로 일할수 있는 역량을 기르기위한 교육적 준비가 요구된다고 봅니다. 셋째로, 지역주민의 건강관리 자조능력 강화를 하나의 목표로 삼는다면 치료자에서 교육자로, 지도자에서 촉진자로, 제공자에서 지원자료의 역할의 변화 내지 다양화를 요구하게 될 것이므로 그에 대처할 수 있는 준비가 필요하다고 봅니다. 넷째로, 생각되어야 할 점은 지역중심건강관리사업을 지향하는 보건의료의 이념적 방향과 그에 상응하는 구체적 접근방법을 효율적으로 적용하기 위해서는 종횡으로 연결되는 의사소통체계의 정립과 민활한 정보교환이 이루어질 수 있어야 한다는 점에서 의사소통의 구심체로서 역할할 수 있는 역량을 함양해야 할 교육적 과제가 있다고 봅니다. 마지막으로 생각되어야 할 점은 지역중심으로 전개될 건강관리사업은 건강증진 및 질병예방적 측면과 질병진료 및 회복과 재활에 이르는 종합적이고 포괄적인 사업이어야 한다는 점에서 종래 공공 의료부문과 사설의료기관 사이에 나누어져 있던 예방의학과 치료의학의 통합 뿐 아니라 정부주축으로 이루어 지고 있는 지역사회개발사업 및 농촌지도사업과 종교 및 각종 민간인 집단이 벌이고있는 사업들과의 전체적인 통합적 접근이 이루어져야 한다고 생각하는 입장에서 종래 간호교육이 강조하지 않던 진료의 의무와 대외적 조직활동에 대한 보완적인 교육조치가 요구된다고 봅니다. 간호의 학문체계로서의 입장은 오랜 역사를 두고 논의의 대상이 되어왔으나 아직까지 뚜렷이 어떤 것이 간호 특유의 지식체계이며 건강문제에 관련하여 무엇이 간호특유의 결정영역이며 이 결정과 그 결과를 어떠한 방법으로 치료적 행위로 옮길 수 있는가에 대한 확실한 답을 얻지 못하고 있는 실정이라고 봅니다. 다만 근래에 제시된 여러 간호이론들 속에서 공통적으로 이야기되어지고 있는 개념들로선 우선 간호학문을 건강과 질병에 관련된 인간의 전인적이고 전체적인 상황을 다루는 학제적 과학으로서보는 입장이 있고 따라서 생물신체적인 면 외에 정신심리적, 사회경제적, 정치문화적 환경과의 상호작용 속에서 인간의 건강과 질병문제를 생각한다는 지향을 갖고 있다고 말할 수 있겠읍니다. 간호교육은 간호계 내적인 학문적, 이론적 체계화의 요구에 못지않게 대민봉사하는 전문직으로서의 사회적 책임을 감당해야하는 중요과제를 안고있어 변화하는 사회요구에 효과적으로 대처해 나가야 할 당면문제를 안고 있읍니다. 간효역할 확대, 보건진료원훈련 등 이러한 사회적 요구에 대응하려는 조치가 되겠읍니다. 이러한 시점에서 간호계가 분명히 짚고 넘어가야 할 사실은 이러한 움직임들이 종래의 의사들의 외업무공급을 연장 확대하는 입장에 서서 간호의 특수전문직 명목을 흐리게 할수있는 위험을 감수할 것인지 아니면 가능한 대체방안을 갖고 간호전문직의 독자적인 진로를 개척하면서 다각적인 도전을 받아들일 준비를 갖추든지 그 방향을 뚜렷이 해야할 일이라 생각합니다. 저로서는 이미 잘 훈련된 간호원들과 조산원들의 교육적, 경험적 배경을 기반으로 지역사회 최일선 건강관리요원으로 사회적 효능을 다 할수 있는 일차건강관리간호조직의 구현을 대체방안으로 제시하고 싶습니다. 간호원과 조산원들의 훈련된 역량과 건강관리체제의 구조적 변화를 효과적으로 조화시킨다면 대부분의 세계인구의 건강문제는 해결가능하다고 보는 입장입니다. 물론 정책과 의료와 행정적지원이 활성화되어지는 환경속에서만 그 기대하는 결과가 확대되리라는 점 부언하는 바입니다. 마지막으로 언급하고 싶은 점은 바로 오늘의 주제 ''교육의 동역자-선생과 학생''이라는 개념입니다. 특히 상회정의적 입장에서 보는 의료사업전개에 지역민 내지 의료소비자의 참여를 강조하는 현시점에 있어 교육자와 학생이 교육의 현장에서 서로 동역자로서 학습의 책임을 나누는 경험은 아주 시기적으로 적합하여 교육적으로 지대한 의미를 갖는 것이라고 생각합니다. 이에 수반되어져야 할 역할의 변화에 수용적인 자세를 갖고 적극 실제적용하려 노력하는 선생앞에서 자주적 결정을 행사해본 학생이야말로 건강관리대상자로 하여금 같은 결정권을 행사할수 있도록 촉구하여 주민의 자조적 역량을 기르고 의료사업의 민주화, 인간화를 이룩할 수 있는 길잡이가 될 수 있으리라 믿는 바입니다.