• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.442-451
• /
• 2008

The evaluation of field degree of consolidation on soft clays has been an important problem in geotechnical areas. Monitoring either settlements or pore water pressures has been widely applied in the filed, but occasionally they have some problems. This study addresses the suggestion and application of another method for evaluating the degree of consolidation using shear wave velocities. A research site where soft clay layers were consolidated by surcharging loads was chosen. Laboratory tests were performed to determine the relation between shear wave velocity and effective stress. Field seismic tests were conducted several times during the consolidation of the clay layers. The tests results show that the shear wave velocity increased significantly as clays consolidated. The shear wave velocities at each field stress states were derived from the laboratory results and the degree of consolidation was evaluated by comparing the shear wave velocities obtained by laboratory and field seismic methods. In most stress states, the degree of consolidation evaluated using the shear wave velocity matched well with that obtained from field settlement record, showing the potential of applying the method using shear waves in the evaluation of field degree of consolidation on soft clay deposits.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.4
• /
• pp.115-123
• /
• 2000

This study compared the degree of consolidation by hyperbolic, curve fitting , Asaoka's and methods using values measured with a theoretical curve in consideration of smear effect and well resistance. The degree of consolidation by the Hyperboilc method was underestimated than the degree of consolidation by Curve fitting. Asaoka's , and Monden's methods. The typical range of the coefficient of horizontal consolidation was Ch=(2-3)Cv in the case considering smear effect and well resistance, and Ch =(0.5-2.1) Cv in the case disregarding smear effect and well resistance. The degree of consolidation obtained by ground settlement monitoring was nearly the same value when the coefficient of smear zone permeability by back analysis was shown to be half that of in-situ and the diameter of the smear zone was shown to be double that of mandrel. By increasing the diameter reduction ratio of the drain, the time of consolidation was delayed. The effect of well resistance showed that the case of a small coefficient of permeability was much more than in the case of a large coefficient of permeability . It was recommended that when designing diameter reduction of a drain, well resistance should be considered.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.3
• /
• pp.197-205
• /
• 2004

The relationships were studied between the range of hardening zone and the intensity of vacuum pressure in case of applying vacuum consolidation drainage method for soil improvement. A testing apparatus was made to measure the range of hardening zone varying the water content and the intensity of vacuum pressure for 3 different the highly compressible dredged clays(Gwangyang, Busan and Mokpo). In case of applying high vacuum pressure, the hardening zone is not spreaded as compared to low vacuum pressure because of the clogging of drainage and developed hardening zone near the drainage.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.4
• /
• pp.33-40
• /
• 2015

In the correlation formulas related to consolidation proposed at present, the analyzed areas are limited to certain overseas or domestic areas and in order to increase the number of data, experimental data of different areas are integrated and therefore in many cases application is difficult. In addition, models have been developed without clear statistic evaluation of the obtained data. Accordingly, this study divided the soft areas of the west coast into Hangang, Kumgang and Yeongsangang in order to maximally reduce uncertainty of the experimental data and performed normality test and regression analysis on the physical and dynamic characteristics. According to the analysis result, the compression index and the modified compression index had strong linearity and in all areas modified compression index and initial void ratio had closest correlation, followed by total unit weight, water contents and liquid limits. As for overconsolidation ratio with depth, the width of overconsolidation ratio was large when the depth was less than 5 to 6 m in all areas and when the depth was over 5 to 6 m, the ratio was constant.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.117-128
• /
• 2000

Sand compaction pile(SCP) is one of the ground improvement techniques which is being used for not only accelerating consolidation but also increasing bearing capacity of loose sands or soft clay grounds. In this study, laboratory model test and large-scale direct shear test were performed to investigate the effects of area replacement ratio of composite ground in order to find out the optimum value of area replacement ratio for the ground improvement purpose. Area replacement ratios of 20%, 30%, 40%, 50%, 60% were chosen respectively in the model tests to study the effects of area replacement ratio on variations of stress concentration ratio, settlement and shear strength characteristics of composite ground. In large-scale direct she4ar tests, area replacement ratios of 20%, 30%, 46% were applied to study their effects on shear strength characteristics of composite ground.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.3
• /
• pp.35-40
• /
• 2007

The vertical drain method recently being used in Korea is divided into the sand drain method, the pack drain method, the paper drain method, and the PBD method according to the drainage. However, these methods generate the disturbed zone called the smear zone when the drainage is penetrated into the in-situ ground. The characteristics of the smear zone generated cause the problems that the coefficient of permeability decreases and the consolidation time becomes longer than expected in the design. Although the size of the smear zone is a very important factor directly influencing the degree of consolidation, in the existing studies, the general value for the size of the smear zone proposed has been used in the design. However, the size of the smear zone proposed by the existing studies cause a loss of economical efficiency because of the inaccuracy of the design. Hence, in this study, the characteristics on the size of the smear zone were analyzed by carrying out the three dimensional numerical analysis and the method to determine the conversion size of the smear zone considering the change of the coefficient of permeability was proposed in order to consider the change of the coefficient of permeability in the actual design.

• Geotechnical Engineering
• /
• v.7 no.4
• /
• pp.65-74
• /
• 1991

Earth structures which located on the weak foundation settle for the long time due to the their own weight (embankment) simultaneously. Because of the consolidation and creep which are timedependent behaviour. This paper is presented creep test Processes using triaxial spparatus, and investigated creep charateristics of marine clay by creep test according to stress level And required and appropriate creep parameters of soil used in the creep equation are investigated by the creep test.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.11b
• /
• pp.35-48
• /
• 1999

The Nakdong River in Korea has formed a delta area .called the Kimhae Plain near the river mouth. Its clay deposit is unusually thick (up to 60m) compared with the clays deposited in other parts of the world. Some parts of the area has been reclaimed with the height of approximately 5 to 7m after installing vertical drains for the development of important new industrial complexes. Settlement measurements were taken during the reclamation works on the soft ground, and it was revealed that the measured settlements were extremely higher than predicted. This paper discusses possible reasons on unusual large settlements from depositional environments of Kimhae clay.

• Geotechnical Engineering
• /
• v.9 no.4
• /
• pp.93-102
• /
• 1993

Soil structures which are constructed over the soft ground settle continuously by the self-weight of embankment for a long time. It is because of timetependent behaviours . consolidation and creep occurring simultaneously. This paper tries to determine the required parameters for analysis of the creep behaviour in marine clays and studied the effect of the confining stress and stress level on the creep parameters . As a result, it presents an equation for the determination of creep parameters according to stress level considering that elastic modulus El and creep parameter f are found to be affected by the applied stress level.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.1
• /
• pp.5-19
• /
• 2003

A series of centrifuge model tests were conducted to investigate the behavior of piled bridge abutments subjected to lateral soil movements induced by approach embankments. The effect of clay layer depth and the rate of embankment construction on piled bridge abutments are the main focus of this study. Tests were performed for two loading types: (1) incremental loading applied in six lifts to the final embankment height; (2) instant loading corresponding to the final embankment height applied in one lift quickly. A variety of instrumentations such as LVDTs, strain gauges, earth pressure transducers, and pore pressure transducers are installed in designed positions in order to clarify the soil-pile interaction and the short- and long-term behavior for piled bridge abutments adjacent to surcharge loads. Based on the results of a series of centrifuge model tests, the distribution of lateral flow induced by staged embankment construction has trapezoidal distribution. The maximum lateral soil pressure is about 0.75$\gamma$H at surcharge loading stage, and about 0.35 $\gamma$H at over 80% consolidated stage.