• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.478-485
• /
• 2012

A series of transparent polyimide (PI) nanocomposite films was synthesized from bicyclo(2,2,2)oct-7-ene-2,3,5,6-tetracarboxylic dianhydride (BTDA) and 1,3-bis(3-aminophenoxy)benzene (BAPB) with various organoclay contents via solution intercalation polymerization to poly(amic acid)s, followed by thermal imidization. Varying organoclay loading in a range of 0 to 1.5 wt% produced variations in the optical transparency, morphology, and oxygen barrier property of the hybrids. An optimum oxygen barrier property was observed for the hybrids containing 1.0 wt% Cloisite 30B; these properties were degraded gradually by further increases in the clay content. The PI hybrid films were found to exhibit excellent optical transparency and almost no color. However, the transparency of the hybrid films decreased slightly with increasing organoclay content. Transparent PI hybrid films containing 1.0 wt% Cloisite 30B were stretched equi-biaxially with various stretching ratios in a range of 100-140% to investigate their optical transparency and oxygen permeability in detail; the variations of clay dispersion and morphology were also determined as a function of equi-biaxial stretching ratio. PI hybrid films with ${\geq}120%$ stretching were found to contain homogeneously dispersed clay in the polymer matrix and exfoliated nanocomposites. The highest barrier to oxygen permeation was found at an equi-biaxial stretching ratio of 130%.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.217-221
• /
• 2003

Effect of direct addition of $CaCl_2$ into sodium alginate film-making solution and immersion of alginate films into $CaCl_2$ solutions on tensile strength (TS), percentage elongation at break (E), water vapor permeability (WVP), and water solubility (WS) of the films were investigated. TS of alginate films prepared by both methods increased. E of $CaCl_2-added$ films did not change significantly (P>0.05), whereas that of $CaCl_2-immersion$ films decreased significantly (p<0.05). WVP of films prepared by both methods decreased significantly, but the effect was more significant in the $CaCl_2-immersion$ films. Water resistance was not changed in the $CaCl_2-added$ films, whreras increased significantly in $CaCl_2-immersion$ films (p<0.05). Properties of alginate films depend on the concentration of $CaCl_2$ treatments in both methods, and they also depend on treatment time in the immersion method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.4
• /
• pp.325-330
• /
• 2004

Several kinds of low voltage cables have been used in nuclear power plants for the supply of electric power, supervision, and the propagation of control signals. These low voltage tables must be inspected for safe and stable operation of nuclear power plants. In particular, the degradation diagnosis to estimate the integrity of low voltage rabies has recently been emphasized according to the long use of nuclear power plants. In order to evaluate their degradation, the surrounding temperature, hardness of insulation material, elongation at breaking point (EAB), etc. have been used. However, the measurement of temperature or hardness is not useful because of the absence of quantitative criteria; the inspection of a sample requires turning off of the power plant power; and, the electrical inspection method is not sufficiently sensitive from the initial through the middle stage of degradation. In this research, based on the theory that the ultrasonic velocity changes with relation to the degradation of the material, we measured the ultrasonic velocity as low voltage cables were degraded. To this end, an ultrasonic degradation diagnosis device was developed and used to measure the ultrasonic velocity with the clothing on the cable, and it was confirmed that the ultrasonic velocity changes according to the degradation of low voltage cables. The low voltage cables used in nuclear power plants were degraded at an accelerated rate, and EAB was measured in a tensile test conducted after the measurement of ultrasonic velocity. With the increasing degradation degree, the ultrasonic velocity decreased, whose potential as a useful parameter for the quantitative degradation evaluation was thus confirmed.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.3
• /
• pp.500-508
• /
• 2014

For this research, synthesis acrylic resin by ethyl acrylate monomer(EAM) and prepared samples which set by difference amount of monoammonium phosphate solution in waterborne acrylic resin. Use these resins, analyzed mechanical properties and thermal stability by films and leather surface coated. The test of DSC experiment sample WAC-APS3 was $410^{\circ}C$ Tm values which means the highest content of monoammonium phosphate had highest thermal stability in acrylic resin. According to measure data for solvent resistance, all samples showed good property. As known in the results, increase of ammonium phosphate constant did not influence to big change of resin properties. In abrasion test WAC-APS3 was good abrasion properties(68.729 mg.loss). Test of tensile strength, as increase as monoammonium phosphate resin analyzed low properties $1.505kgf/mm^2$ to $1.275kgf/mm^2$. In elongation case, same as strength test result 425 % to 384 % by increase to monoammonium phosphate amount in acrylic resin.

• Journal of Korea Foundry Society
• /
• v.41 no.5
• /
• pp.411-418
• /
• 2021

In order to experimentally investigate the effect of Ni or Cu addition on microstructure and mechanical properties of high Si Solution Strengthened Ferritic Ductile cast Iron (SSF DI), a series of lab-scale sand casting experiment were conducted by changing initial concentration of Ni up to 3.0wt% or Cu up to 0.9wt% in the alloy. It was found that increase in Ni or Cu content in the alloy leads to increase in strength properties and hardness as well as decrease in ductility. The higher Ni or Cu content the SSF DI has, the higher fraction of pearlite was observed. At similar levels of Ni or Cu contents in the alloy, higher pearlite area fraction was observed in the Cu-containing SSF DI than that in the Ni-containing SSF DI. When the effect of the microstructure on the mechanical properties of Ni-containing SSF DI was considered, Ni-containing SSF DI was found to have excellent strength and hardness as well as good elongation when the pearlite fraction was controlled less than 10%. As the pearlite fraction in the Ni-containing SSF DI exceeds 10%, however, it shows drastic decrease in elongation. Meanwhile, gradual increase in strength and hardness, and decrease in elongation with respect to increase in pearlite fraction were observed in Cu-containing SSF DI. The different microstructure-mechanical property relationships between Ni-containing and Cu-containing SSF DI were due to the combined effect of the relatively weak pearlite stabilizing effect of Ni compared to that of Cu in high Si SSF DI, and matrix strengthening effect caused by the different amounts of those alloying elements required for similar pearlite fraction.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.147-153
• /
• 2019

The prestressing steel wire, which is applied a tension to reinforce the structure, is applied flexure simultaneously by the duct and the deviator. In order to evaluate the deflected tensile performance of the prestressing steel wire subjected to both tensile and flexural stresses, the numerical analysis for 600 cases with variables of wire diameters, mandrel diameters, and friction coefficient between mandrel and steel wire was performed. As the result of analysis, the larger the diameter of the steel wire was, the lower the deflected tensile performance was, and the effect decreased with the increase of the wire elongation. The effect of mandrel diameter and friction coefficient between mandrel and wire on the deflected tensile performance of the wire was very small. But the deflected tensile performance and the friction coefficient between mandrel and strand showed a relatively high correlation. Therefore, it is necessary to make enough large elongation to secure the deflected tensile performance. If there is a restriction on the elongation, it is necessary to reduce the diameter of the steel wire to an appropriate value, and to increase the friction between steel wires by adjusting the surface condition of the steel wire.

• Vending industry
• /
• v.1 no.2 s.2
• /
• pp.104-105
• /
• 2001

최근들어 오디션자판기 시장이 뜨겁게 가열되고 있다. 제품에 대한 본격적인 소비자 인기는 아직 기대하기 힘든 시점이지만 이 시장의 선점을 노리는 업체들이 각자만의 노하우를 가진 제품들을 속속 출시하고 있기 때문. 이런 가운데 CIA코리아에서는 본연의 오디션 기능 외에도 동영상 비디오 CD까지 제작 가능한 `락뱅` 오디션박스를 선보이고 신천점, 연신내점 등지에 샵을 오픈하며 제품에 대한 빠른 소비자 인기확산을 시도해 가고 있다. 금호 집중취재에서는 인터넷 시대 최고의 엔터테인먼트기로 락뱅을 띄우기 위해 야심찬 도전을 펼쳐 가고 있는 CIM코리아의 사업현황을 살펴본다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.68-71
• /
• 2003

Poly(trimethylene terephthalate)는 1941년 Caligo printing Ink 사의 Whinfield와 Dickson에 의해 PET와 함께 처음으로 그 중합방법이 보고 된 이래, 주원료인 1,3-propanediol의 생산가격이 너무 높아 지난 60년간 상업화 및 학문적 연구가 거의 이루어져 있지 않다. 미국의 Shell사와 독일의 Degussa(미국의 Dupont)에 의해 1,3-propanediol이 대량 생산되면서[1], PTT 섬유의 상업적 생산에 점점 관심이 집중되고 있다. 국내에서도 S사와 Shell의 공동연구에 의해 제품이 생산되는 둥 많은 연구가 진행중에 있기는 하지만, Poly(ethylene terephthalate)의 연구에 비한다면 아직 걸음마 단계의 기초 자료로 제품이 생산되고 있는 실정이다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.239-242
• /
• 2003

고분자 물질은 여러 가지 물질과 복합체를 형성하여 물리적 성질을 향상시켜왔다. 특히 유ㆍ무기물질의 복합체는 의류용, 산업용 차원에서 관심이 증대되고 있으며, 유ㆍ무기 입자가 첨가된 고분자 복합소재는 고분자 매트릭스에 기계적, 열적 특성을 향상시킬 뿐만 아니라 이들의 다양한 기능성을 부여할 수 있다.[1] 최근 수 십 년 동안 자연 오염문제로 인하여 섬유분야에서도 항균 처리가 관심이 증대되고 있다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.360-361
• /
• 2003

토목합성재료(geosynthetics)의 일종인 지오그리드(geogrids) 제품은 1979년 영국에서 개발된 이래 세계적으로 그 적용 용도와 수요가 지속적으로 증가하고 있는 토목합성 보강재이다. 일반적으로 지오그리드는 올레핀계 수지를 시트 상으로 압출하여 천공 및 연신하여 제조하는 플라스틱 타입 지오그리드와 고탄성 고강력 섬유로 제직 혹은 제편하고 이를 수지로 코팅하여 제조하는 텍스타일 타입 지오그리드의 두 가지로 분류된다. (중략)