• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.494-499
• /
• 2006

LSIV (Large Scale Image Velocimetry)는 영상 처리 기술을 이용하여 수표면의 유속을 측정하는 장비이다. 처리가 용이한 좋은 LSIV의 영상을 만들기 위해서는 높은 고도에서 내려다 보며 영상을 획득하는 것이 측정의 정밀도를 높이는 데 도움이 된다. 이를 위해 트럭에 장착된 기중기를 이용하는 이동용 LSIV를 개발하고 있다. 이 때 기중기의 흔들림에 따라 획득된 영상이 흔들리는 문제가 발생하며, 영상의 흔들림을 보정하여 유속을 측정할 수 있는 영상 처리 알고리듬이 필요하게 된다. 이 연구에서는 PTV(Particle Tracking Velocimetry)의 입자 추적 알고리듬과 LSIV의 좌표 변환 알고리듬, LSIV의 유속 산정 알고리듬을 조합하여 흔들리는 영상에서 표면 유속을 측정하는 알고리듬을 개발하였다. 입자 추적 알고리듬은 비디오 카메라로 촬영된 연속 영상의 참조점들의 움직임을 추적하여 카메라의 위치 변동을 파악한다. 영상 분석된 결과들을 이러한 참조점들을 기준으로 변환하였다. 개발된 알고리듬의 검증을 위해서 실험 수로에서 동일한 흐름에 대해 흔들리지 않은 영상과 흔들리는 영상의 두 가지 영상을 만들었다. 흔들림이 없는 영상의 처리결과를 기준으로 삼아, 흔들림이 있는 영상의 처리 결과를 검토하였다. 그 결과, 흔들림이 지나치게 커서 참조점들의 추적이 불가능한 경우를 제외하고는 두 자료의 처리 결과는 거의 동일하였으며, 유속 측정의 최대 오차는 약 5 % 내외로 나타났다. 이 오차는 흔들림 때문에 생기는 영상의 열화 때문으로 추정된다. 이 알고리듬은 이동용 LSIV 시스템에 효율적으로 활용될 수 있을 것으로 기대된다.비용적 측면이나 생태 보존적 측면에서 유리할 것으로 판단된다.one)을 설치하는 대책이 필요하다. 저수지 관리를 효과적으로 수행하기 위해서는 저수지 내부의 탁도 거동을 정확히 예측할 수 있어야 한다. 따라서 추후 동수역학 및 열역학에 기초한 3차원 수치모형 연구와 성층흐름에 정밀한 밀도류 실험연구 및 이에 대한 적용이 필요할 것으로 판단된다.함으로써 정보의 질적보장과 정보전환의 표준화방안을 제시하는 정보분석시스템이다.이용, 수자원의 지속적 확보기술의 특성에 따른 4개의 평가기준과 26개의 평가속성으로 이루어진 2단계 기술가치평가 모형을 구축하였으며 2개의 개별기술에 대한 시범적용을 실행하였다.하는 것으로 추정되었다.면으로의 월류량을 산정하고 유입된 지표유량에 대해서 배수시스템에서의 흐름해석을 수행하였다. 그리고, 침수해석을 위해서는 2차원 침수해석을 위한 DEM기반 침수해석모형을 개발하였고, 건물의 영향을 고려할 수 있도록 구성하였다. 본 연구결과 지표류 유출 해석의 물리적 특성을 잘 반영하며, 도시지역의 복잡한 배수시스템 해석모형과 지표범람 모형을 통합한 모형 개발로 인해 더욱 정교한 도시지역에서의 홍수 범람 해석을 실시할 수 있을 것으로 판단된다. 본 모형의 개발로 침수상황의 시간별 진행과정을 분석함으로써 도시홍수에 대한 침수위험 지점 파악 및 주민대피지도 구축 등에 활용될 수 있을 것으로 판단된다. 있을 것으로 판단되었다.4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익

• Journal of the Korean Society of Radiology
• /
• v.6 no.3
• /
• pp.207-215
• /
• 2012

As one of photo dynamic therapies, the existing LED photo irradiation method with 635 nm continuous wave has most frequently been used for acne treatment, it suffered from a low energy efficiency and generation of a large amount of heat in tissues requiring improvement measures. In this thesis, a LED photo irradiation system for acne treatment has been designed using PWM(Pulse Width Modulation) mode to enhance the energy efficiency and prevent thermal destruction in tissues. System configuration consisting largely of timer module, PWM module, and photo transfer device has been designed with the use of 1 W LED at a wavelength of 660 nm for the photo transfer device to increase skin penetration depth for treatment of acne. Frequency and wave form generated by using PWM control was verified along with confirmation of output energy of 660 nm LED and surface temperatures of tissues, followed by evaluation of stable energy outputs and stability of tissues. The results indicated that whereas power loss was high and thermal destruction in tissues was exhibited when C.W mode was used to obtain the optical energy of 1 W LED at a wavelength of 660 nm for acne treatment, realization of PWM mode allowed lowering of power consumption for LED through pulse width modulation, and no occurrence of thermal destruction in tissues, suggesting that PWM mode is safer and more effective for treatment of acne than C.W mode.

• Journal of Adhesion and Interface
• /
• v.9 no.3
• /
• pp.20-26
• /
• 2008

It is well know that the structure of shape memory alloy (SMA) can change from martensite austenite by either temperature or stress. Due to their inherent shape recovery properties, SMA fiber can be used such as for stress or cure-monitoring sensor or actuator, during applied stress or temperature. Incomplete superelasticity was observed as the stress hysteresis at stress-strain curve under cyclic loading test and temperature change. Superelasticity behavior was observed for the single-SMA fiber/epoxy composites under cyclic mechanical loading at stress-strain curve. SMA fiber or epoxy embedded SMA fiber composite exhibited the decreased interfacial properties due to the cyclic loading and thus reduced shape memory performance. Rigid epoxy and the changed interfacial adhesion between SMA fiber and epoxy by the surface treatment on SMA fiber exhibited similar incomplete superelastic trend. Epoxy embedded single SMA fiber exhibited the incomplete recovery during cure process by remaining residual heat and thus occurring residual stress in single SMA fiber/epoxy composite.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.809-817
• /
• 2008

This paper deals with the development of ViscoElastic Continuum Damage Finite Element Program (VECD-FEP++) and its verification with the results from both field and laboratory accelerated pavement tests. Damage characteristics of asphalt concrete mixture have been defined by Schapery's work potential theory, and uniaxial constant crosshead rate tests were carried out to be used for damage model implementation. VECD-FEP++ predictions were compared with strain responses (longitudinal and transverse strains) under moving wheel loads running at different constant speeds. To this end, an asphalt pavement section (A5) of Korea Expressway Corporation Test Road (KECTR) instrumented with strain gauges were loaded with a dump truck. Also, a series of accelerated pavement fatigue tests have been conducted at pavement sections surfaced with four asphalt concrete mixtures (Dense-graded, SBS, Terpolymer, CR-TB). Planar strain responses were in good agreement with field measurements at base layers, whereas strains at both surface and intermediate layers were found different from simulation results due to the complexity of tire-road contact pressures. Finally, fatigue characteristics of four asphalt mixtures were reasonably described with VECD-FEP++.

• Pediatric Infection and Vaccine
• /
• v.13 no.1
• /
• pp.71-77
• /
• 2006

Purpose : Shigellosis is still an important cause of acute food-borne diarrheal diseases throughout the world. We investigated the transmission routes and clinical course through the outbreak of shigellosis in Mapo-Gu, Seoul. Methods : From October 7th to November 19th in 2005, Mapo-Gu public health center had referred 32 patients with confirmed or suspected shigellosis to the National Medical Center. We had investigated source of infection, epidemiology, laboratory findings, and clinical course of the cases occurred during this outbreak. Results : Among 32 patients, 24 patients had been confirmed with shigellosis, 8 patients had been diagnosed with suspected shigellosis. They ranged in age from 5 months to 12 years old and their mean age was 6.5 years. The clinical manifestations were as follows; diarrhea, fever, abdominal pain and asymptomatic condition. Symptoms had sustained for 3.7 days on the average. S. sonnei were cultured by rectal swab and founded to be resistant to ampicillin and TMP/SMX except to 3rd generation cephalosporin. After treatment with antibiotics such as cefixime and ceftriaxone or imipenem and conservative treatment with electrolyte and fluid replacement for 5~7 days, Stool cultures of the rectal swab grew no Shigella in these cases except 3 cases. Conclusion : An outbreak of shigellosis had occurred in a preschool and elementary school children. From the same results of antimicrobial susceptibility and pulsed-field gel electrophoresis patterns in this study, we suggest that the outbreak of shigellosis in this report had been originated from a single strain. According to all negative results about suspected food and water cultures, we couldn't find out source of infection. Through materials offerred by Mapo-Gu Public Health Center, we presumed the trasmission routes probably were person-to-person.