• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.164-167
• /
• 2001

본 연구에서는 포항제철소에서 제철부산물로 발생되는 제강분진을 전처리 없이 산화촉매로 사용하여 김포 수도권 매립지의 침출수 처리공정에서 펜톤산화조에 유입되는 원수를 대상으 로 과산화수소를 이용한 연속식 산화처리 실험을 수행하였다. 먼저 회분식 실험결과를 바탕 으로 최적 반응조건에서 lab-scale 연속식 기초반응실험과 자체 설계.제작한 연속산화공정에서의 처리실험을 수행하였다. 또한 기존의 펜톤산화공정에서 Fe 공급원으로 사용되고 있는 FeSO$_4$.7($H_2O$)와의 반응성 비교실험도 수행하였다. 반응기간동안 일정 pH를 유지하기 위해 pH controller를 사용하였으며 침출수 수질은 CODcr로 나타내었다. 반응 pH 3.5, 체류시간 1 hr, 과산화수소 주입량 1,500mg/1에서 제강분진과 FeSO$_4$.7($H_2O$)를 각각 주입하여 수행한 연속처리 기초실험에서는 제강분진을 산화반응촉매로 사용한 경우에 침출수CODcr 처리율 62%, 과산화수소의 분해율 52%를 나타내었다. FeSO$_4$.7($H_2O$)를 산화반응 촉매로 사용한 경우에는 약 65-70%정도의 다소 높은 처리효율을 나타낸 반면에 과산화수소의 소비량은 제강분진의 경우보다 약 20%이상의 높은 값을 나타내었다. 연속산화공정 실험에서는 운전 3시간 이후에 유출수 중의 CODcr과 $H_2O$$_2$의 농도가 안정된 값을 나타내었다. 이 때 산화 반응조의 침출수 CODcr 제거효율은 약 43%이었으며, 처리수의 농도는 현재의 침출수 방류기준 이하로 나타났다. 결론적으로 침출수의 연속식 산화처리 실험결과, 처리효율과 경제성에서 제강분진의 산화촉매활용 공정의 개발 가능성이 매우 높은 것으로 나타났다.ell에 의해 완전분해 되었으며, 함께 존재시 TC는 Fe$^{\circ}$만으로는 분해가 되지 않았지만 cell에 의해 완전분해 되었으며, 함께 존재시 TCE분해에 저해작용을 미치는 것으로 나타났다.술의 첨가가 요구되고 있다. 따라서, 산성광산배수 오염지대에 대해 획일적으로 같은 처리방법을 채택하여 사용하는 것보다 각 지역 또는 광산산성폐수가 유출되어 나오는 광산폐기물의 특성 등을 고려하여 거기에 맞는 기술들을 복합적으로 또는 단독으로 사용하되 처리방법 채택 시 신중을 기할 것이 요망된다.정시에는 SeaWiFS 위성과 관련된 global algorithms 중에서 490nm와 555nm의 복합밴드를 포함하는 OC2 알고리즘(ocean color chlorophyll 2 algorithm)을 사용하는 것이 OC2 series 및 OC4 알고리즘보다 좋은 추정 값을 도출할 수 있을 것으로 기대된다.환경에서는 5일에서 7월에 주로 이 충체의 유충이 발육되고 전파되는 것으로 추측되었다.러 가지 방법들을 적극 적용하여 금후 검토해볼 필요가 있을 것이다.잡은 전혀 삭과가 형성되지 않았다. 이 결과는 종간 교잡종을 자방친으로 하고 그 자방친의 화분친을 사용할 때만 교잡이 이루어지고 있음을 나타내고 있다. 따라서 여교잡을 통한 종간잡종 품종육성 활용방안을 금후 적극 확대 검토해야 할 것이다하였다.함을 보이고 있다.X> , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경우 Dv값이 제일 작았다. 바. 본 연구의 목적중의 하나인 인체유해 중금속이온인 Hg(II), Cd(II)등이 NaCl같은 염화물

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.283-283
• /
• 2015

1,4-dioxane은 페인트, 광택제 및 코팅제의 제조시에 첨가되는 화학물질로 인간에 대한 발암 가능성과 수중에서의 지속성으로 인해 EPA priority pollutant로 지정되어 있다. 이에 최근 고도산화법을 이용한 처리가 계속적으로 연구되고 있으며, UV/$H_2O_2$ 공법을 통하여 수계에서 발견되는 난분해성 유기 오염물의 제거가 효과적인 것으로 밝혀졌다. 하지만 고도산화공정(AOP)은 다량의 에너지 소모와 산화제 투여로 인한 높은 운전비용이 현실적인 적용에 장애가 되고 있다. 한편 상대적으로 저렴한 비용으로 1,4-dioxane을 처리할 수 있다는 장점으로 인하여 생물학적 분해에 대한 많은 연구가 진행되어 왔다. 하지만, 1,4-dioxane에 대한 많은 연구들이 주로 분해미생물의 분리동정 및 회분식 분해특성에 대한 연구들 위주로 보다 실질적인 연속적 처리반응조의 운전결과들은 거의보고 되지 않고 있다. 본 연구는 Lab scale 연속처리반응조의 장기운전 후 pilot plant 현장적용에 앞서 인공폐수와 합성폐수에서의 분해효율 비교 회분식 실험을 통해 합성폐수내 생물학적 분해에 영향을 미치는 inhibitor의 영향을 확인하였으며, 미생물의 배양 조건에 따른 분해효율 비교 회분식 실험과 modeling을 통하여 현장운영 효율을 예측하였다. 이를 반영하여 추후 진행예정인 pilot plant의 현장 적용성 검토 및 최적 설계인자 도출, 장기운전에서의 효율성 증대를 목적으로 한다.

• Korean Journal of Food Science and Technology
• /
• v.40 no.2
• /
• pp.146-151
• /
• 2008

In this study, batch or semi-continuous reactions, introducing site-specific carboxylic acids in ${\beta}$-1,3-glucan structures, were performed to increase water solubility and gel forming ability, using TEMPO/hypobromite with or without NaBr as catalysts. Regio-selective carboxylic acid formations were determined with infrared (IR) and $^{13}C$ nuclear magnetic resonance (NMR) spectroscopic analyses. The regio-selective reactions with and without NaBr gave oxidation yields of 92.5 and 85.6%, respectively, in the batch type, and yields of 93.9 and 86.4%, respectively, in the semi-continuous type. The reaction times in the batch and semi-continuous reactions without NaBr were delayed by 100 and 150%, respectively, as compared to those with NaBr. A combination of IR and $^{13}C$ NMR analyses were used to confirm the formation of carboxylic acids in ${\beta}$-1,3-glucan. From the batch reactions with and without NaBr, the water solubilities of oxidized products were 50.0 and 55.6%, respectively, and in the semi-continuous reactions they were 52.6 and 53.5%, respectively; while the water solubility of the native ${\beta}$-1,3-glucan was less than 1.0%. Finally, as compared to the native ${\beta}$-1,3-glucan, the gel forming ability of the reaction products was greatly increased irrespective of the presence of NaBr or the reaction type.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.10
• /
• pp.919-926
• /
• 2009

Enrichment of anaerobic ammonium oxidation (ANAMMOX) bacteria is the essential step for operating full-scale ANAMMOX bioreactor because adding a significant amount of seeding sludge is required to stabilize the ANAMMOX reactor. In this study, the enrichment of ANAMMOX bacteria from an activated sludge using sequencing batch reactor was conducted and verified by analyzing changes in the microbial community structure. ANAMMOX bacteria were successfully enriched for 70 days and the substrate removal efficiencies showed 98.5% and 90.7% for $NH_4\;^+$ and $NO_2\;^-$ in the activity test, respectively. The phylogenetic trees of Planctomycetes phylum showed that the diverse microbial community structure of an activated sludge was remarkably simplified after the enrichment. All 36 clones, obtained after the enrichment, were affiliated with ANAMMOX bacteria of Candidatus Brocadia (36%) and Candidatus Anammoxoglobus (64%) genera. The quantification using real-time quantitative PCR (RTQ-PCR) revea ed that the 16S rDNA concentration of ANAMMOX bacteria was 74.8% compared to the granular ANAMMOX sludge obtained from an upflow ANAMMOX sludge bed reactor which had been operated for more than one year. The results of molecular analysis supported that the enriched sludge could be used as a seeding sludge for a full-scale ANAMMOX bioreactor.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1083-1091
• /
• 2000

The objective of this study is to develop effective and economical treatment processes for the removal of non-biodegradable organics by reusing the sludge generated from Fenton's Oxidation Process. It was found that about 50% of coagulants and 50% of catalyst can be reduced by reusing the sludge generated from Fenton's Oxidation Process. It was also found that the amount of sludge generation can be reduced in coagulation process and Fenton's Oxidation Process. From the results of bench-scale test, it was found that the average removal efficiency increased to 8.5% and the amount of sludge generation was reduced up to 35% by reusing the sludge as coagulant. The average organic removal efficiency increased to 5.3% and the amount of sludge generation was reduced up to 14% by reusing the sludge as catalyst in Fenton's Oxidation. It can be concluded that the reuse of sludge generated from Fenton's Oxidation Process would be reduced cost of chemical consumption and Fenton's sludge treatment.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.379-381
• /
• 2001

굴절율 측정에 의하여 당 성분을 정량하는 방법을 이용한 장치로, 글루코오스의 환원성에 기초하여 산화ㆍ환원 반응을 이용한 적정법이나 흡광도 측정법과 비교하여 시약이 필요없고 시간이 단축되는 장점이 있다. 그리고, 보통의 굴절율 측정기(예로 Abbe refractometer)가 당 농도 0.5％일 때의 굴절율 값 단위로 측정되는 한계를 극복하여 본 당 모니터링 장치는 바탕 물질과의 굴절율 차이를 증폭한 값으로 data(differential refractive index)를 얻을수 있으므로 글루코오스 농도 0.01% 단위까지 정량할 수 있어서 0.1% 이하의 저농도도 측정 가능하며 그 이상의 농도 범위에서도 측정 오차를 줄일수 있는 장점이 있다. (중략)

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.7
• /
• pp.700-704
• /
• 2008

Nitrite and free ammonia have been known as substrate inhibitors in anaerobic ammonium oxidation. To reduce inhibitory effect of these substrates, the NH$_3$-N/NO$_2$-N ratio in the influent could be properly controlled in anaerobic ammonium oxidation process. Five kinds of NH$_3$-N/NO$_2$-N ratio were assayed in batch to find optimum NH$_3$-N/NO$_2$-N ratio, curtailing substrate inhibition. As the results of batch test, the highest T-N removal efficiency of 88% was obtained at 1.00 : 1.30 of NH$_3$-N/NO$_2$-N ratio. In addition, rate constants for ammonium and nitrite in zero-order kinetics were found to be the highest values as 7.66 mg/L$\cdot$hr and 11.89 mg/L$\cdot$hr at 1.00 : 1.30 ratio, respectively. However, as for the specific anammox activity, the ratio of NH$_3$-N/NO$_2$-N ratio was recommended as 1 : 1.15 which can maintain the highest SAA during continuous operation and preclude the accumulation of nitrite in the reactor.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.2
• /
• pp.102-108
• /
• 2009

DO, ORP and pH values measured during SBR operation can provide information about removal reaction of organic contaminants and nutrient materials in the reactor. It is already generalized control strategy to control reaction phase time using their special patterns indicating the end of the removal reactions. However, those informations are limited to point out the end time of oxidative reaction in the aerobic phase or reductive reaction in the anoxic phase without giving quantitative value of influent loading level. In this research, a diagnosis algorithm which can estimate the loading level of carbon and ammonia as high, medium and low was developed using the basic measurements like DO, ORP, and pH. It will be possible to know the level of influent loading rate from those online measurements without experimental analysis.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.8
• /
• pp.489-493
• /
• 2017

Microbial fuel cells (MFC) are bio-electrochemical processes that can convert various organic materials present in wastewater into electrical energy. For scaling-up and practical application of MFC, it is necessary to investigate the effect of anode size, electrode distance, and total area of anode on substrate degradation. Spaced electrode assembly (SPA) type microbial fuel cell with multiple anodes treating domestic wastewater was used for simulation. According to computer simulation results, the shorter the distance between electrodes than the size of single electrode, the faster the substrate degradation rate. Particularly, when the total area of the anode is large, the substrate decomposition is the fastest. In this study, it was found that the size of the anode and the distance between the electrodes as well as the cathode electrode, which is known as the rate-limiting step in the design of the microbial fuel cell process, are also important factors influencing the substrate degradation rate.

• Resources Recycling
• /
• v.13 no.2
• /
• pp.9-15
• /
• 2004

A large tons of spent iron oxide catalyst come from the Styrene Monomer(SM) production company. It is caused to pollute the land and underground water due to the high alkali contents in the catalyst by burying them in the landfill. In order to recycle the spent catalyst, a basic study on the recovery of chromium ion from metal plating wastewater with the spent catalyst was carried out. The iron oxide catalyst adsorbed physically $Cr^{+6}$ in the lower pH 3.0, that is the isoelectric point of the spent catalyst. It was found that the iron oxide catalyst reduced the $Cr^{+6}$ into Cr+3 by the oxidation of ferrous ion into ferric ion on the surface of catalyst, and precipitated as $Cr(OH)_3$ in the higher than pH 3.0. The $Cr^{+6}$ was recovered 2.0∼2.3g/L catalyst in the range of pH 0.5∼2.0, but it was recovered 1.5 g/L catalyst at pH 3.0 of wastewater. The recovery of Cr was increased as the higher concentration in the continuous process, but the flowrates were nearly affected on the Cr recovery.