• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.5
• /
• pp.54-61
• /
• 2014

In this study, a plume exhausted from rocket nozzle is investigated by using an unstructured 2-dimensional axisymmetirc DSMC code at various altitude. The small back-pressure to total-pressure ratio($P_b/P_o$) and large $P_b/P_o$ represent low and high altitude condition, respectively. At low altitude, the plume shows a typical complicated structure (e.g. Mach disk) of underexpanded jet while the high altitude plume experiences plain expansion. The various features of exhaust plume is discussed including density, translational/rotational temperature, Mach number and Knudsen number. The results shows that even at 20 km altitude where the freestream Knudsen number is small as $1.5{\times}10^{-5}$, the transitional and rarefied flow regimes can occur locally within the plume. It confirms the necessity of DSMC computation at low altitude.

• Composites Research
• /
• v.33 no.6
• /
• pp.383-389
• /
• 2020

Thermoplastic composite is introduced to design an automotive door impact beam, and the manufacturing process is demonstrated. The safety regulation for vehicles has been steadily tightened, and weight-reduction has become a mandatory factor in the automotive industry. Hence, both high-performance and lightweight are demanded for automotive components. The aim of the present study is to develop an automotive door impact beam using fiber-reinforced thermoplastic composites to reduce the weight of the impact beam while increasing its mechanical performance. A new production method which combines continuous fiber-reinforced composite and LFT(Long Fiber-reinforced Thermoplastic) is implemented by using insert injection molding process. The mechanical performance of the composite impact beam was evaluated using 3-point bending tests. Thermoplastic composite will expand its application range to various automotive components due to its light-weight design capability and high productivity.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.196-201
• /
• 2000

There is a great demand for reducing the amount of material used in mass-produced plastics parts for material cost constitutes a large percentage of the total cost of a product up to 75% It may be noted that the price of plastics is directly related to the price of petroleum. Material reduction therefore decreases the amount of oil needed for the manufacture of plastics and thus help conserve this natural resource. Therefore microcellular foaming process(MCPs) was studied for solving this problems alternatively in 1980's at M. I. T. Until now in microcellular plastics processes carbon dioxide gas was mainly used for microcellular foaming Because carbon dioxide has more solubility than any other gases such as nitrogen gas or helium gas. The purpose of the this research is measurement of changing of the microcellular plastics' weight by using nitrogen gas in injection molding an comparing weight reduction of microcellular foamed plastics for using carbon dioxide gas with nitrogen gas.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.701-712
• /
• 2000

The continuous fiber reinforced composites of GF/PA were fabricated using a pultrusion resin impregnation apparatus and cut into pellets of 6 mm length. GF/PA pellets were then melt-mixed with PP resin to prepare new types of ternary composites, GF/PA/PP. Mechanical and rheological properties of such composites revealed to be better than conventional ternary composites due to the longer average glass fibers. Measurements also showed that the mechanical properties of the composites prepared by direct injection molding were higher than those of the composites prepared by injection molding followed by extrusion. To improve adhesions of fiber surfaces and polymer matrix, PP-MAH (maleic anhydride) has been introduced in the GF/PA/PP composites as a compatibilizer. It was found that PP-MAH did indeed improve surface adhesion between fibers and polymer matrix and that, as a result, various mechanical properties were markedly enhanced. Visualization of the phase structure in the samples was done by means of SEM. The surfaces of glass fibers in GF/PA/PP composites revealed that the fibers remained to be encapsulated by PA resin. However, pre-encapsulation did not persist in GF/PA/PP/PP-MAH composites due to the improvement of surface adhesion between fibers and polymer matrix, although resin sticking to the fiber was observed.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.128-128
• /
• 2017

현재 식물공장에서 사용되고 있는 이식장치는 핀을 이용하여 육묘트레이 위에서 플러그묘를 뽑아 육묘트레이 또는 포트로 옮겨 심는 방식을 채택하고 있다. 이러한 이식 방식은 셀과 셀 사이에 있는 다른 묘의 잎을 파지함으로써 묘를 2개 이상 취출하는 현상이라든지 핀에 의한 잎 손상 등이 우려되고 있어 이에 대한 개선책이 필요하다. 본 연구는 플러그묘의 이식작업 시 잎 손상을 줄이면서 기계 적응성을 향상시킬 수 있는 이식시스템을 개발하기 위해 진공흡인을 이용한 이식 메커니즘에 대해 검토하였다. 플러그묘 이식시스템은 육묘트레이 셀을 X-Y로 옮기는 묘 이송부, 육묘트레이의 셀 하단으로부터 진공을 발생시켜 묘를 떨어뜨리는 진공 흡인부, 낙하되는 묘를 감지하는 센서와 블로워 및 공압 실린더로 구성된 진공 발생부, 혈공된 포트를 진공 발생부의 유도관으로 옮기는 포트 이송부 등으로 설계 제작하였다. 이식 메커니즘은 육묘트레이 하단부로부터 플러그묘를 1개씩 진공흡인하는 방식을 채택하였고, 이를 위해 상하 모두 개방된 72공 육묘트레이($L538{\times}W280{\times}H45mm$)를 윗부분(Ø35mm) 보다 아랫부분(Ø37mm)의 셀이 넓은 형상으로 PP재질의 육묘트레이를 사출금형 제작하였다. 묘 이송부에 장착된 플러그묘는 X축 방향(12개 셀)으로 이식작업이 이루어지고, Y축(6개 셀)으로 이동된 후 다시 동일한 방향으로 연속 작업이 가능하도록 제어프로그램을 구성하였다. 이식 원리는 진공 흡인부에 플러그묘가 이송되면 진공 발생부의 흡착패드가 위로 전진하여 진공을 발생시켜 묘를 흡인하고, 유도관 내에 부착된 광화이버센서에 의해 묘를 감지하여 블로워와 공압실린더를 제어함으로써 이식 공정이 끝나게 된다. 로메인상추의 플러그묘를 대상으로 진공흡인 시험을 실시한 결과 묘 손상없이 이식작업이 가능한 것으로 확인되었다.

• Elastomers and Composites
• /
• v.34 no.3
• /
• pp.229-238
• /
• 1999

In this study, double bond, unsaturated group was introduced to the main chain of EVA by chemically treating EVA, nondiene polymer. Benzene sulfonic acid, ENB and DCPD were used as a third element. Also, from blending CR and SBR, conventional synthetic rubber we prepared vulcanizates and examined their physical properties. The datum lead to the following conclusion that some problems were modified; limited temperature in use and mechanical properties like hardness, tensile strength, tensile stress, and elongation rate of thermoplastic EVA, keeping the following advantages of original EVA; green strength, injection molding by Pressure, adhesion, tackiness, dimensional stability, and ozone resistance, etc. It is expected that continuous research of the modification between nondiene and diene polymer will improve what were shown disadvantages in synthetic polymer; processing, oxidation resistance, and adhesion. In addition, it will be possible to continue process of rubber products by utilizing possible fluidity for fusion of EVA.

• Journal of Adhesion and Interface
• /
• v.2 no.4
• /
• pp.24-31
• /
• 2001

Polypropylenes(PP) with different melt index values were mixed with ethylene-propylene rubber(EPR) or ethylene-propylene diene monomer rubber(EPDM) and an ethylene copolymer containing carboxylic acid group in a twin screw extruder. Then test specimens were prepared from the pellets of the blends with an injection molding machine. The mechanical properties and morphology of fractured surfaces were measured. Relative peak intensities of carboxylic acid group on the specimen surface were measured with an attennuated total reflection infrared spectrometer (ATR-IR) and compared with each other. The blend specimens were found to have the gradient morphology of rubber domains in PP matrix in the core region and PP skin layer. The blends containing PP of higher melt index showed greater content of ethylene copolymer containing carboxylic acid on the surface when the relative peak intensities of ATR-IR for carboxylic acid were compared. As the melt index values were increased, the decrease tendency in mechanical propeties such as tensile strength and impact strength was more significant for PP/EPR blends than PP/EPDM blends.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.80-85
• /
• 2016

Carbon fiber-reinforced composite materials have been widely used in various industrial fields, but there are limits to increasing their strength and stiffness, because of the short-length fibers that are impregnated in them. In this study, a lab-scale small extruder system was developed with the capability to perform the carbon fiber impregnation and extrusion process in order to evaluate the properties of long-length carbon fiber reinforced thermoplastic composite materials molded by the LFT-D method. Specimens were made with the small extruder to press-mold long-length carbon fiber composite materials and evaluate their material properties. As a result, it was found that the carbon fiber length, press load and carbon fiber contents have a considerable influence on the strength and stiffness. Additional studies on such factors as the mixing screw design and coating of the carbon fiber are needed in order to improve the mechanical properties of carbon fiber composite materials.

• Journal of Animal Science and Technology
• /
• v.52 no.5
• /
• pp.407-412
• /
• 2010

The objective of this study was to determine the effects of dietary supplementation of whole garlic powder (WGP) on semen characteristics and blood antioxidant level in boars. For this study, nine Duroc boars of 12 months age were used. Semen and blood samples were collected for 13 weeks, once in each week. The boars were fed the basal diet (BD; control) or BD supplemented with 3% WGP. There were no significant differences in the semen volume and sperm concentration between control and WGP group on all collection weeks. However, total sperm number per ejaculate was higher in the WGP group than that in the control group on collection weeks 6, 7 and 8 (P<0.05). Also, on collection weeks 5, 6, 7 and 8, mean of total ejaculated sperm numbers per boar were significantly higher in the WGP group compared to control group (P<0.05). On the other hand, ejaculation frequency per boar (boar's libido) and total ejaculated sperm number per boar were significantly increased in the WGP group compared to the control group, respectively (P<0.05). Although there was no difference in polyphenol level in seminal plasma between two treatment groups, polyphenol level in blood serum was significantly higher in the WGP group on collection weeks 9, 12 and 13 (P<0.05). These results indicate that dietary supplementation of 3% WGP improves boar libido and semen productivity such as ejaculation frequency per boar, total sperm number per ejaculate, mean of total ejaculated sperm number per head, and elevate the blood level of antioxidant (polyphenol) in boar serum.