• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.4
• /
• pp.375-381
• /
• 2010

In this paper, the heat-transfer characteristics of steam reforming in an annular reactor are presented. Heat is supplied by the catalytic combustion of syn-gas. The thermal behaviors of exothermic and endothermic reactions in a directly coupled concentric-tube packed-bed reactor were investigated experimentally. The gas mixture supplied for catalytic combustion consisted of the off-gas emitted from MCFC anode. Methane in steam at a suitable S/C (steam-to-carbon) ratio was used in the reforming reactions. On the basis of the experimental results, a simple simulation was performed to predict the temperature profile required in the reforming side of the reactor to achieve optimum hydrogen yield. The results of this study may be utilized as reference data in future studies for further development of coupled reactors.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.677-682
• /
• 2001

Catalytic combustion is the environmental-friendly technology, which has been applied to a variety of areas for industrial and domestic use in recent years. Accordingly, this study performed the development of the catalytic manufacturing technology for the high temperature and of the catalytic combustor in priority, which were aimed to be applied to a commercialized boiler. Paliadium(Pd) of a noble metal was used as a catalyst for the high temperature and supported on alumina($Al_[2}O_{3}$) and zirconia($ZrO_{2}$) in constant weight ratio. Activity of Pd catalysts is compared and analyzed in the catalytic combustion of natural gas. The ratio of $Pd/Al_{2}O_{3}=4$ was found to be better than any other weight ratios in activity and durability. The performance examination of catalysts and of combustion through the plate-type combustor made it possible to be developed the cylindrical-type combustor which has increased combustion area. Catalytic combustion boiler of 25,000 kcal/hr class was also developed, which had the optimum combustion condition at the nozzle of 5.95mm and the orifice of 21mm. This condition was determined through the performance experiments of catalytic combustion boiler to which the cylindrical-type catalytic combustor was applied.

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.265-272
• /
• 2003

Some catalytic reactors for industrial/generation gas turbines were reviewed and investigated to understand the current status and future prospect for ultra low NOx catalytic gas turbine combustor. Catalytic reactor which was applied to 1${\sim}$10MW class gas turbine has achieved the ultra low emission corresponding to less than 3ppm NOx and 10ppm CO. But the durability and sizing flexibility of catalyst is needed to improve the catalyst performance for commercial gas turbine operation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.112-121
• /
• 2005

본 연구는 2003년부터 2005년까지 2년간 에너지관리공단의 선행연구과제로서 진행되었으며 20 Watt 급 소형 연료전지에 수소를 공급할 수 있는 소형의 마이크로 채널 메탄올 개질장치를 개발하는 것을 목적으로 하였다. 개질장치는 개질기 본체, 여기에 반응열을 공급 해주는 촉매 연소기 그리고 연료를 증발시켜 주는 연료증발기의 세부분으로 구성되며 각 반응기의 개발 및 통합을 수행하였다. 반응기는 반응면적을 증가시키기 위하여 폭 $200{\sim}5000{\mu}m$, 필이 $200{\sim}5000{\mu}m$ 규모의 마이크로 채널 유로를 금속 박판을 화학 에칭하여 구현하였으며 이를 수십장 적층하여 전체 반응기를 제작하였다. 마이크로 채널표면에 내부 촉매 지지체를 먼저 코팅한 후 촉매를 코팅하는 방법을 사용하여 담지체 코팅으로 기하학적 표면적 대비 표면적이 10 배 이상 향상되는 우수한 결과를 얻을 수 있었고 촉매의 내구성이 월등히 향상 되었다. 저온 활성 촉매를 사용하여 $350^{\circ}C$ 이하에서 메탄을 전환율 90% 이상을 구현하였다. 실제 운전 후 측정 결과 개질 반응기의 부분별 온도차가 $20^{\circ}C$ 이내로 설계의 우수성을 확인하였다. 촉매 연소기를 이용한 개질 반응열 공급장치를 개발하여 20Watt 급 수소 생산을 위한 개질 반응기에 반응열을 공급하도록 하였다. 이와 함께 촉매 연소기를 이용한 연료 증발열 공급 장치 개발하여 개질기 공급 연료의 90% 이상이 기화되도록 하였다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1994.05a
• /
• pp.98-102
• /
• 1994

천연가스의 주성분인 순수 메탄에 대한 촉매 산화반응은 Pd촉매가 가장 양호하나 LP가스의 주성분인 프로판에 대해서는 Pt촉매가 가장 양호한 결과를 보였다. 그러나 유황 피독된 Pd촉매는 메탄에 대해 영구피독 현상을 보였고, fresh한 Pd촉매는 연료 중 미량의 유황분량에 의해 반응 개시온도가 지연되는 경향을 보였다. 이와 같은 촉매독 영향이 적은 Rh촉매버너를 개발하여 8000시간 이상 성공적인 연소 실험을 하고 있으며 C 방적의 염색 시험기에 적응 실험한 결과 기존의 적외선 전기 건조기에 비해 에너지 절감은 약30-40%를 기하였고 연료비는 70-80%의 절약효과를 얻었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.508-512
• /
• 2017

In this study, we carried out the study on the combustion characteristics of HTPB/AP propellants with Al and Zr as fuel metal in order to develop the solid propellant with high burning rate. The major combustion characteristics of propellant were investigated as measuring of the burning rate and pressure exponent, and the HTPB/AP solid propellants were prepared with introducing Butacene as burning rate catalyst for the enhancement of burning rate. The propellant with Al and Zr was demonstrated the improvement of propellant performance and combustion characteristic.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.1
• /
• pp.11-18
• /
• 2011

The geometrically similar swiss roll reactors of different physical sizes were tested with the aim of independently determining the effects of Re and Da. It is found that the difference between catalytic and non-catalytic combustions extinction limits are narrowed as scale decreases. In addition to assess the importance of fuel chemistry, different families of fuels including alkanes and ethers were tested. From these results the effect of scale and fuel type on microscale reactor performance and implications for practical micro combustion devices are discussed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.2
• /
• pp.29-37
• /
• 2018

This paper reports the preliminary firing test performed with an ADN-based monopropellant using a 5 N scale thruster. ADN-based propellant and catalyst was fabricated and catalytic combustion of propellant was characterized by DSC-TG analysis. Although an explosion in the catalyst bed was occurred, high temperature in the catalyst bed obtained and demonstrated catalytic combustion of the propellant. Preliminary test results motivates the research for catalysts with better thermal stability.

• Journal of the korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.7-13
• /
• 1995

기관의 저연비화는 비단 경제적인 면뿐 아니라 환경 등 사회적인 면에서 보았을때에도 차량이 갖추어야 할 필수적인 요건이라 할 수 있다. 지금의 추세로는 차량에 희박연소기관을 탑재하는 것은 앞으로 더욱 증가될 것으로 예측된다. 이 저연비에 효과적으로 대응될 수 있는 희박연소는 일반적인 3원촉매를 사용할 경우 지금까지는 배기량 2l를 넘는 대배기량기관에서는 실용화가 어려운 것으로 되어 있어서 희박연소기관 대부분은 1.8l급까지로 되어 있다. 그런데 최근 일본의 미쓰미시사는 별개의 희박연소용 촉매를 사용하지 않으면서 2.5l급의 희박연소화한 대배기량기관을 차량에 탑재하는데 성공한 것으로 발표하고 있다. 더구나 지금까지 대부분의 희박연소기관에 채용되고 있는 전역 공연비센서가 아닌 보통의 $O_{2}$센서이고 이와 같이 큰 배기량기관의 희박연소화를 실현한 것을 세계에서 최초의 것으로 보고하고 있다.

• 한국연소학회:학술대회논문집
• /
• 2006.10a
• /
• pp.20-26
• /
• 2006

This study investigated on the conversion of nitrogen component in ammonia gas to control fuel-NOx. Control conditions were found to suppress the production of NOx in the catalytic combustion of the gasified fuels. Also, the results would provide the basis of the theoretical study on fuel-NOx generation mechanism.