• The Journal of the Petrological Society of Korea
• /
• v.28 no.2
• /
• pp.53-69
• /
• 2019

In the Jirisan area of the Yeongnam Massif, Korea, several ductile shear zones are developed within Precambrian gneiss complex (Jirisan metamorphic rock complex). The ductile shear zones have a general NS- and NNE-striking foliation with westward dipping directions. The foliation developed in the shear zones cut the foliation in gneiss complex. The stretching lineations are well developed in the foliated plane of the shear zone, showing ENE-trend with gentle plunging angle to the ESE direction. Within shear zone, several millimetric to centimetric size of porphyroclasts are deformed strongly as a sigmoid form by ductile shearing. The sigmoid patterns of porphyroclasts in the shear zones indicate the dextral shearing. The spatial distribution of ductile shear zone is characterized by the dominant NS- and NNE-striking dextral sense in the central and eastern regions respectively. In the western part, it develops in NE-striking dextral sense which is the general direction of the Honam shear zone. The U-Pb concordant ages obtained from the two samples, the strongly sheared leucocratic gneiss, are $1,868{\pm}3.8Ma$ and $1,867{\pm}4.0Ma$, respectively, which are consistent with the U-Pb ages reported around the study area. We supposed that the ductile shearing in the study area is occurred about 230~220 Ma during late stage of the continental collision around Korea and is preceded by granitic intrusion related to subduction during 260~230 Ma, which are supported by compiling the age data from sheared gneiss, deformed mafic dyke intruded gneiss complex, and non-deformed igneous rocks.

• The Journal of the Petrological Society of Korea
• /
• v.7 no.1
• /
• pp.53-68
• /
• 1998

Microstructural and rock structural analyses on the deformed Cheongsan granite characterized by abundant K-feldspar megacrysts have been carried out to understand the temperature condition for the ductile shear deformation. In K-feldspar, microkinks, microfractures and core-and-mantle structures without the development of subgrains in outer core-zone are the most common microstructures observed. Myrmekites and flame perthites are developed at the strain-localized areas along the microfractured K-feldspar. In plagioclase, microfractures, deformation twins and kink bands are predominant. The deformation twins cut across the igneous zonation of the plagioclase. Patterns of c-axis fabrics of dynamically recrystallized new quartz grains display single girdle and type II crossed girdle where prism slip system is predominant. These characteristic microstructures produced during the ductile shearing suggest that the ductile shear deformation in the Cheongsan granite occurred under epidote-amphibolite conditions($400-500^{\circ}C$). Three main shear zones are recognized at outcrop scale: discrete shear zone with anastomosing high-strain domain, shear zone with pervasive S-C structure and shear zone with homogeneously foliated domain. Geometric features of these shear zones produced during the ductile shear deformation are controlled by amount of strain under the $400-500^{\circ}C$ deformation temperature.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2003.05a
• /
• pp.84-85
• /
• 2003

소백산육괴의 동부에 분포하는 영양-울진지역의 선캠브리아기 변성암류는 평해층, 기성층, 원남층, 평해화강편마암, 하다우백질화강편마암 등으로 구성되어 있다(김옥준 외, 1963). 그러나, 최근 김남훈 외(2001, 2002)은 야외조사연구와 암석학적 및 지구화학적 연구를 통하여 주로 변성화산암류로 기재되었던 기성층은 변성화산암류가 아니라 평해층과 원남층에서 산출되는 화강암질편마암과 각섬암 기원의 변성암류가 연성전단변형을 받아 형성된 압쇄암 내지 초압쇄암으로 되어 있고, 기존의 기성층은 변성화산암류와 같이 성분상으로 구분되는 별개의 층이 아닌 구조적으로 만들어진 연성전단대의 중심부일 가능성을 시사한 바가 있다. 본 연구는 연성전단대의 연장성 및 연성전단대 형성과 관련된 지구조운동의 특성을 파악하고, 중첩된 변형구조들의 선후관계로부터 영양-울진지역 선캠브리아기 변성암류에 대한 변형작용사를 규명하기 위해 기성층의 분포지를 중심으로 이 지역 선캠브리아기 변성암류에 대한 상세한 야외지질조사를 실시하였다. 그 결과, 예천(북후면-평은면)지역을 통과하여 봉화 부근에서 동북동-서남서 방향이 동-서 방향으로 전환하여 장군봉지역까지 연장되는 것으로 알려져 있는 우수 주향 이동성 예천전단대(KIGAM, 1995; 강지훈 외 1997; 강지훈, 2000; 강지훈과 김형식, 2000)는 영양-울진지역까지 연장됨이 확인된다. 또한, 영양-울진지역의 선캠브리아기 변성암류에는 연성전단변형 이전에 적어도 한 번의 습곡작용과 이후에 적어도 두 번의 습곡작용이 인지된다. 각 변형단계별 특징적인 구조요소를 요약하면 다음과 같다. D1 변형: 편마면 내지 편리(S0)가 습곡되어 형성된 F1 습곡은 동-서 방향의 준 수평적인 습곡축을 갖는 뿌리 없는 등사습곡 형태로 인지된다. 양 날개부의 S0 엽리는 F1 습곡축면(S1)으로 완전히 전위된 하나의 엽리(S0-1)로 나타나고, S0-1 엽리는 이 지역의 광역엽리로 인지된다. S0-1 광역엽리는 구성암류의 대상 분포 방향과 유사한 서북서 주향에 북쪽으로 중각 경사하는 집중된 방향성을 보이며 분산되어 나타난다. D2 변형: 변형구조로는 신장선구조, 압쇄구조면, 비대칭습곡 등으로 인지된다. 신장선구조는 S0-1 엽리면상에서 주로 신장된 석영(집합체)과 장석(집합체)들의 정향배열에 의해 정의되고, S0-1 엽리의 주향 방향으로 저각으로 침강하는 집중된 방향성을 보이며 분산되어 나타난다. 신장선구조에 평행하고 S0-1 엽리에 수직한 단면에서는 상부-동쪽-이동의 우수주향 이동성 연성 전단운동감각을 지시하는 구조요소들이 다량 관찰된다. 연성전단변형에 의해 형성된 압쇄구조면은 전단엽리와 압쇄엽리에 각각 해당하는 C면과 S면 등이 인지된다. 전단엽리 C면은 S0-1 광역엽리와 거의 일치하고, 압쇄엽리 S면은 F2 비대칭습곡의 축면엽리와 거의 일치한다. S0-1 엽리를 습곡시키는 F2 비대칭습곡은 S0-1 엽리를 전단면으로 하여 상부-동쪽-이동 전단운동에 의해 형성된 밀착습곡 형태로 인지된다. F2 습곡축은 북동 방향으로 중각 내지 저각 침강하고 F1 습곡축과는 65$^{\circ}$-75$^{\circ}$ 범위의 사이각을 이룬다. F2 습곡축면은 동북동 주향에 북쪽으로 중각으로 경사하고 F1 습곡축면과는 20$^{\circ}$-40$^{\circ}$ 범위의 사이각을 이룬다. D3 변형. S0-1 엽리와 압쇄구조면 등을 습곡시키는 F3 습곡은 준 수평적인 습곡축과 습곡축면을 갖는 개방 횡와습곡의 형태로 인지된다. D4 변형: F4 습곡은 비대칭 공역성 킹크습곡, 공역성 충상단층에 수반되어 나타나는 드래그습곡, 대칭 개방 직림습곡 등의 다양한 습곡 형태로 인지된다. 이들 F4 습곡의 축면엽리는 일반적으로 동-서 주향에 남쪽과 북쪽으로 경사한다. 그 경사각은 비대칭 공역성 킹크습곡(저각), 드래그습곡(중각), 대칭 개방 직립습곡(고각) 순으로 고각을 이룬다. F4 습곡축은 동쪽과 서쪽으로 저각 침강하는 집중된 방향성을 보인다. 공역성 충상단층은 동-서 주향에 남쪽과 북쪽으로 경사하는 단층면과 상부가 북쪽과 남쪽으로 충상하는 운동상을 보인다. 드래그습곡의 축면엽리는 이러한 공역성 충상단층운동의 전단압축방향에 수직으로 발달한다. 이러한 D4 변형구조는 남-북 방향의 압축 지구조 환경하에서 형성된 것으로 고찰된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.101-110
• /
• 2015

Recently, nine $1397{\times}1397{\times}178mm$ RC panels were tested under in-plane pure-shear monotonic loading condition using the Panel Element Tester by Hsu (1997, ACI). By combining the equilibrium, compatibility, and the softened stress-strain relationship of concrete in biaxial state, Modern Truss Model (MCFT, RA-STM) are capable of producing the nonlinear analysis of RC membrane panel through the complicated trial-and-error method with double loop. In this paper, an efficient algorithm with one loop is proposed for the refined Mohr compatibility Method based on the strut-tie failure criteria. This algorithm can be speedy calculated to analyze the shear history of RC membrane element using the results of Hsu test. The results indicate that the response of shear deformation energy at Big Bang of shear strain significantly influenced by the principal compressive stress-strain (crushing failure).

• Journal of the Korean Geotechnical Society
• /
• v.27 no.10
• /
• pp.35-43
• /
• 2011

The area to be studied is the place where the main line rail way will be constructed in accordance with the scheduled construction project of Yeongju dam, and is a fold and mylonite zone over several km that is formed by ductile-shearing effect. The ductile shear zone, which has been transformed by faulting for long geological time, shows a complicated geological structure. Due to the recrystallization of mineral caused by transformation in deep underground (>8km), a mylonite zone with lamellar structure has properties distinguished from other fault zones formed by transformation near earth surface <2km). To see the properties of mylonite, this study analyzed the transformation rate of sample rocks and the shape of constriction structure accompanied with transformation. While the transformation of fault zone shows a round oblate, the mylonite zone shows a prolate form. Transformation rate in fault zone was measured to be less than 1.2 compared to the state before transformation while the measured rate in mylonite zone was 2.5 at most. Setting the surface of discontinuity as the base, the unconfined compressive strength of slickenside can be categorized in sedimentary rocks, and a change of strength was observed after water soaking over certain time. Taking into account that the weathering resistance of the rock based on mineral and chemical organization is relatively higher, its engineering properties seems to result from the shattered crack structure by crushing effect. When undertaking tunnel construction in mylonite zone, there should be a special care for the expansion of shattered cracks or the fall of strength by influx of ground water.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.10-13
• /
• 2011

내진설계의 기본 개념은 보를 기둥보다 약하게 설계하여 보에 소성힌지를 발생시켜 구조물 전체의 큰 변형을 방지하는 것이다. ACI 352R-02에서는 지역의 지진특성에 따라서 접합부의 상세 설계법을 구분하여 적용한다. 하지만 보와 접합부의 내력 차이가 상대적으로 작게 설계된 구조물의 경우 탄성 범위를 유지해야 하는 경우의 접합부에도 파괴가 발생할 가능성이 있다. 횡하중이 작용할 때 접합부 내부는 전단력의 지배를 받게 되고, 전단내력과 부착내력에 따라서 파괴모드가 결정된다. 본 논문에서는 양방향 반복하중이 작용하는 10개의 보-기둥 접합부를 통해서 접합부와 인접보의 전단내력 차이에 따라서 발생하는 파괴모드를 관찰하고 접합부 내의 전단내력 및 부착내력의 감소로 인해 발생하는 부재의 연성에 대해서 관찰하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.1
• /
• pp.175-181
• /
• 2010

The three truss models(equilibrium truss model, Mohr compatibility truss model, and the soften truss model) based on a rotating angle is called the rotating-angle model. The three rotating-angle models have a common weakness: they are incapable of predicting the so-called "contribution of concrete". To take into account this "contribution of concrete", the modern truss model(MCFT, STM) treats a cracked reinforced concrete element as a continuous material. By combining the equilibrium, compatibility, and the softened stress-strain relationship of concrete in biaxial state, MTM is capable of producing the nonlinear analysis of reinforced concrete structures composed of membrane element. In this paper, an efficient algorithm is proposed for the solution of proposed model incorporated with failure criteria. This algorithm is used to analyze the behavior of reinforced membrane element using the results of Hsu test.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.3
• /
• pp.224-259
• /
• 1997

The Janggunbong area(this study area) at the central-south part in the North Sobaegsan Massif, Korea, consists mainly of Precambrian(Wonnam and Yulri Formations)-Paleozoic [Joseon Supergroupuangsan Quarzite, Dueumri Formation and Janggun Limestone) and Pyeongan Group (Jaesan and Dongsugok Formations)l metasedimentary rocks and Mesozoic granitoid(Chunyang granite). This study is to interpret geological structure of the North Sobaegsan Massif in the Janggunbong area by analysing rock-structure and microstructure of the constituent rocks. It indicates that its geological structure was formed at least by four phases of deformation after the formation of gneissosity(S0) in the Wonnam Formation and bedding plane(S0) in the Paleozoic metasedimentary rocks. The first phase deformation(D1) formed tight isoclinal fold(F1). Its axial plane(S1) strikes east-west and steeply dips north. Its axis(L1) subhorizontally plunges east-west. The second phase deformation(D2), which was related to ductile shear deformation, formed stretching lineation(L2) and shear foliation(S2). The sense of the shear movement indicates dextral strike-slip shearing(topto-the east shearing). The third phase deformation(D3) formed open inclined fold(F3). Its axial plane(S3) strikes east-west and moderately or gently dips north. Its axis(L3) subhorizontally plunges east-west. The F3 fold reoriented the original north-dipping S1 foliation and D2 shear sense into south-dipping S1 foliation(top-to-the west shear sense on this foliation) at its a limb. The four phase of deformation(D4) formed asymmetric-type open inclined fold(F4) of NE-vergence with NW striking axial plane(%) and NW-NNW plunging axis(L4). The F4 fold partly reoriented pre-D4 structural elements with east-west trend into those with north-south trend. Such reorientaion is recognized mainly in the Paleozoic metasedimentary rocks.

• The Journal of the Petrological Society of Korea
• /
• v.13 no.4
• /
• pp.179-190
• /
• 2004

Precambrian metamorphic rocks of Yeongyang-Uljin area, which is located in the eastern part of Sobaegsan Massif, Korea, are composed of Pyeonghae, Giseong, Wonnam Formations and Hada leuco granite gneisses. These show a zonal distribution of WNW-ESE trend, and are intruded by Mesozoic igneous rocks and are unconformably overlain by Mesozoic sedimentary rocks. This study clarifies the deformation history of Precambrian metamorphic rocks after the formation of gneissosity or schistosity on the basis of the geometric and kinematic features and the forming sequence of multi-deformed rock structures, and suggests that the geological structures of this area experienced at least four phases of deformation i.e. ductile shear deformation, one deformation before that, at least two deformations after that. (1) The first phase of deformation formed regional foliations and WNW-trending isoclinal folds with subhorizontal axes and steep axial planes dipping to the north. (2) The second phase of deformation occurred by dextral ductile shear deformation of top-to-the east movement, forming stretching lineations of E-W trend, S-C mylonitic structure foliations, and Z-shaped asymmetric folds. (3) The third phase deformation formed I-W trending open- or kink-type recumbent folds with subhorizontal axes and gently dipping axial planes. (4) The fourth phase deformation took place under compression of NNW-SSE direction, forming ENE-WSW trending symmetric open upright folds and asymmetric conjugate kink folds with subhorizontal axes, and conjugate faults thrusting to the both NNW and SSE with drag folds related to it. These four phases of deformation are closely connected with the orientation of regional foliation in the Yeongyang-Uljin area. 1st deformation produced regional foliation striking WNW and steeply dipping to the north, 2nd deformation locally change the strike of regional foliation into N-S direction, and 3rd and 4th deformations locally change dip-angle and dip-direction of regional foliation.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.4
• /
• pp.307-321
• /
• 2015

The study area, Bophi Vum, Myanmar, is composed of the harzburgite, serpentinite and dunite, those are covered by Quaternary alluvium. The chromite ore bodies are developed within dunite and harzburgite bodies, mainly within dunite bodies. To identify the extension of the chromite ore bodies, we carried out trench surveys in the 5 different sites. The chromite ore bodies have 0.3-1.5 m wide, and several meters of extension, and deformed strongly as a sigmoid and a boudin shapes with dunite and harzburgite bodies by ductile deformation. The ductile deformation have a top-to-the-west shear sense, indicating the existence of a westward thrusting. The NW-SE trending distribution of ore bodies is related to the dextral ductile shearing and/or to the block rotation as a book-shelf structure by dextral strike-slip movement.