• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.5
• /
• pp.203-211
• /
• 2006

In this paper, the optimization of direct design system of steel frames by genetic algorithm involving advanced analysis are performed. For the analysis of steel frames advanced analysis accounting for geometric nonlinearity and material nonlinearity are executed. The genetic algorithm was used as optimization technique. The weight of structures is treated as the objective function. The constraint functions are defined by load-carrying capacities, deflections, inter-story drifts, and ductility requirement. The effectiveness of the proposed method are verified by comparing the results of the proposed method with those of other method.

• The Journal of Information Technology
• /
• v.3 no.1
• /
• pp.29-36
• /
• 2000

Viterbi decoder is a maximum likelihood decoding method for convolution coding used in satellite and mobile communications. In this paper, a Viterbi decoder with constraint length of K=7, 3 bit soft decision and traceback depth of ${\Gamma}=96$ for convolution code is implemented using VHDL. The hardware size of designed decoder is reduced by 4 bit pre-traceback in the survivor memory.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.1-1
• /
• 2000

본 논문에서는 3축이 연성되어 비선형 운동 방정식으로 표현되는 3축 안정화 인공위성 시스뎀에 입릭외란과 시스템의 불확실성이 존재할 경우에도 자제 정밀도를 유지하는 제어기를 설계한다. 비선헝 운동 방정식으로 표현되는 운동 방정식을 선형화하고 PID제어기를 구성하였다 선형화에 의한 시스템의 불확실성과 입력 외란을 신경회로망으로 추정하여 외란의 엉향을 제거하도록 구성된 PR제어기의 제어입력을 수정한다 수정된 제어입력은 외란을 상쇠시켜 시스템 출력에서 외란의 효과를 제거하게 된다. 신경회로망은 제어입력과 시스템 출력, 기준 운동 방정식간의 관계를 이용하여 외간과 시스템의 불확실성을 추정하며, 역전파 알고리즘을 사용한 학습 알고리즘으로 신경 회로망을 교육한다. 제안된 신경회로망을 이용한 외란 제거 제어기는 시뮬레이션을 통하여 자세 정밀도의 향상을 검증한다

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.2
• /
• pp.111-120
• /
• 2004

The optimal design method of indoor thermal environment using CFD coupled simulation and genetic algorithms (GA) is developed in this study. CFD could analyze the thermal environment considering the distribution of temperature, velocity, etc. in a room. Therefore, It would be appropriate to use CFD for the optimal design method considering their distribution. In this paper, the optimal design means the most appropriate boundary conditions of the room among the conditions where the design target of indoor therm environment is achieved. Two step optimal indoor thermal environment design method is proposed. It includes the GA for searching the optimal indoor thermal environment design. To examine the performance of this method, the optimal design of hybrid ventilation system, which uses the natural cross ventilation and the radiation-cooling panel is conducted. The optimal design which satisfies the design target (thermal comfort, minimum cooling load, minimum vertical temperature difference) is found using two step optimal design method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.101-110
• /
• 2015

Recently, nine $1397{\times}1397{\times}178mm$ RC panels were tested under in-plane pure-shear monotonic loading condition using the Panel Element Tester by Hsu (1997, ACI). By combining the equilibrium, compatibility, and the softened stress-strain relationship of concrete in biaxial state, Modern Truss Model (MCFT, RA-STM) are capable of producing the nonlinear analysis of RC membrane panel through the complicated trial-and-error method with double loop. In this paper, an efficient algorithm with one loop is proposed for the refined Mohr compatibility Method based on the strut-tie failure criteria. This algorithm can be speedy calculated to analyze the shear history of RC membrane element using the results of Hsu test. The results indicate that the response of shear deformation energy at Big Bang of shear strain significantly influenced by the principal compressive stress-strain (crushing failure).

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.774-779
• /
• 2018

This paper presents fragile watermark system using quantization and DC coefficients. It is a way to prevent the watermark fro, being detected if the original has been modified in any way. In other words, the detection of a watermark ca be said to be originality after the watermark is inserted, without any damage. Since lossy compression such as JPEG is often allowed or required in practical applications, authentication methods, authentication methods should be distinguished from malicious modifications such as image shifting, cropping, filtering, and replacement. The proposed algorithm implements a fragile watermarking algorithm that shows image authentication with JPEC compression and the watermark easily breaks other malicious variants.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.3
• /
• pp.63-70
• /
• 2012

In this study, the displacement-based design concept, the performance by the existing reinforced concerte column and steel reinforced concrete composite column for SRC purchased the maximum design ground acceleration improvement compared to the performance design. SRC have several advantages such as strength enhancement and high ductility. H-beam or steel tubes were used for embedded elements of the SRC composite columns. SRC cross-section for the P-M diagram and analysis on the nominal bending monent SRC designed for composite columns for disparity estimation is presented to the displacement-based seismic design. Performance improvement of the performance-based design performance targets for the design seismic displacement and design criteria for the direct displacement-based design methods and to improve the seismic performance due to the displacement coefficient method is proposed to design. SRC compared with the RC column designed to improve the performance and displacement ductility ratio displacement results in the performance design results showed significantly improved performance.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.1
• /
• pp.9-20
• /
• 2009

In a real-time system with both hard real-time periodic tasks and soft real-time aperiodic tasks, it is important to guarantee the deadlines of each periodic task as well as obtain fast response time for each aperiodic task. This paper proposes Enhanced Total Bandwidth Server (ETBS) with possibly shorter response time than Total Bandwidth Server (TBS), which is efficient and widely used for servicing aperiodic tasks. For uniprocessor system using Earliest Deadline First (EDF) scheduling algorithm, ETBS assigns an on-line deadline to each aperiodic task considering a surplus slack time which gained for every unit execution time of periodic job. The proposed method can fully utilize the processor while meeting all the deadlines of periodic tasks. We show that the proposed ETBS provides better response time of aperiodic tasks than TBS theoretically, but has the same computational complexity as TBS, O(1). Simulation results show that the response time of aperiodic tasks with ETBS are shorter than one with TBS.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.3
• /
• pp.163-171
• /
• 2024

Structural health monitoring for ships and offshore structures is important in various aspects. Ships and offshore structures are continuously exposed to various environmental conditions, such as waves, wind, and currents. In the event of an accident, immense economic losses, environmental pollution, and safety problems can occur, so it is necessary to detect structural damage or defects early. In this study, structural response data of multi-linked floating offshore structures under various wave load conditions was calculated by performing fluid-structure coupled analysis. Furthermore, the order reduction method with distortion base mode was applied to the structures for predicting the structural response by using the results of numerical analysis. The distortion base mode order reduction method can predict the structural response of a desired area with high accuracy, but prediction performance is affected by sensor arrangement. Optimization based on a genetic algorithm was performed to search for optimal sensor arrangement and improve the prediction performance of the distortion base mode-based reduced-order model. Consequently, a sensor arrangement that predicted the structural response with an error of about 84.0% less than the initial sensor arrangement was derived based on the root mean squared error, which is a prediction performance evaluation index. The computational cost was reduced by about 8 times compared to evaluating the prediction performance of reduced-order models for a total of 43,758 sensor arrangement combinations. and the expected performance was overturned to approximately 84.0% based on sensor placement, including the largest square root error.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.11
• /
• pp.517-526
• /
• 2008

As the functionality of portable devices arc being enhanced and the performance is being greatly improved, power dissipations of battery driven portable devices are being increased. So, an efficient power management for reducing their power consumption is needed. In this paper, we propose a window-based DVS algorithm for MPEG Player. The proposed algorithm maintains the recently frame information and execution time received from MPEG player in window queue and dynamically adjusts (frequency, voltage) level based on window queue information. Our algorithm can be implemented in the common multimedia player as a module. We employed well-known MPlayer for the measurement of performance. The experimental result shows that the proposed algorithm reduces energy consumption by 56% on maximal performance.