• Korean Journal of Heritage: History & Science
• /
• v.42 no.3
• /
• pp.4-24
• /
• 2009

This paper examined archaeological resources that discuss how Silla entered the Gangneung area, the coastal region along the East Sea that has been excavated most actively. Silla expanded its territories while organizing the its system as an ancient state and acquired several independent townships in various regions, stretching its forces to the East Sea area faster than any other ancient states of the time. In particular, many early relics and heritages of Silla have been found in Gangneung, the center of the East Sea area. Many archaeological resources prove these circumstances of that time and provide brief texts that are valuable for our interpretation of historical facts. In this respect, it was possible for me to examine these resources to answer my question as to why early relics and heritages of Silla are found in the Gangneung area. Based on my research on Silla's advancement into the Gangneung area, I have acquired the following results: How did Silla rule this area after conquering Yeguk in the Gangneung area? After conquering the Gangneung area, Silla attempted an indirect ruling at first. Later, Silla adopted a direct ruling system. I divided the indirect ruling period into two phases: introduction and settlement. In detail, Silla's earthenware and stone chamber tombs first appeared in Hasi-dong in the fourth quarter of the 4th Century and the tombs spread to Chodang-dong in the second quarter of the 5th Century. A belt with dragon pattern openwork, which seems to be from the second quarter of the 5th Century, was found to tell us that the Gangneung region began receiving rewards from Silla during this time. Thus, the period from the fourth quarter of the 4th Century to the second quarter of the 5th Century is designated as the 1st Phase (Introduction) of indirect ruling in terms of aechaeological findings. This is when Silla was first advanced to the Gangneung area and tolerated independent administration of the conquered. In the third and fourth quarters of the 5th Century, old mound tombs appeared and burials of relics that symbolized power emerged. In the third quarter of the 5th Century, stone chamber tombs were prevalent, but wooden chamber tombs, stone mounded wooden chamber tombs, and lateral entrance stone chamber tombs began to emerge. Also, tombs that were clustered in Hasi-dong and Chodang-dong began to scatter to Byeongsan-dong, Yeongjin-ri, and Bangnae-ri nearby. Steel pots were the symbol of power that emerged at this time. In the fourth quarter of the 5th Century, stone chamber tombs were still dominating, but wooden chamber tombs, stone mounded wooden chamber tombs, and lateral entrance stone chamber tombs became more popular. More crowns, crown ornaments, big daggers, and belts were bestowed by Silla, mostly in Chodang-dong and Byeongsan-dong. The period from the third quarter to the fourth quarter of the 5th Century was designated as the 2nd Phase (Settlement) of indirect ruling in terms of aechaeological findings. At this time, Silla bestowed items of power to the ruling class of the Gangneung area and gave equal power to the rulers of Chodang-dong and Byeongsan-dong to keep them restrained by each other. However, Silla converted the ruling system to direct ruling once it recognized the Gangneung area as the base of its expedition of conquest to the north. In the first quarter of the 6th Century, old mound tombs disappeared and small/medium-sized mounds appeared in the western inlands and the northern areas. In this period, the tunnel entrance stone chamber tombs were large enough for people to enter with doors. A cluster of several tunnel entrance stone chamber tombs was formed in Yeongjin-ri and Bangnae-ri at this time, probably with the influence of Silla's direct ruling. In the first quarter of the 6th Century, Silla dispatched officers from the central government to complete the local administration system and replaced the ruling class of Chodang-dong and Byeongsan-dong with that of Silla-friendly Yeonjin-ri and Bangnae-ri to reorganize the local administration system and gain full control of the Gangneung area.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.73-80
• /
• 2022

In this study, details of NRC beam-column connections were developed in which beam and columns pre-assembled in factories using steel angles were bolted on site. The developed joint details are NRC-J type and NRC-JD type. NRC-J type is a method of tensile joining with TS bolts to the side and lower surfaces of the side plate of the NRC column and the end plate of the NRC beam. NRC-JD type has a rigid joint with high-strength bolts between the NRC beam and the side of the NRC column for shear, and with lap splices of reinforcing bar penetrating the joint and the beam main reinforcement for bending. For the seismic performance evaluation of the joint, three specimens were tested: an NRC-J specimen and NRC-JD specimen with NRC beam-column joint details, and an RC-J specimen with RC beam-column joint detail. As a result of the repeated lateral load test, the final failure mode of all specimens was the bending fracture of the beam at the beam-column interface. Compared to the RC-J specimen, the maximum strength of the specimen by the positive force was 10.1% and 29.6% higher in the NRC-J specimen and the NRC-JD specimen, respectively. Both NRC joint details were evaluated to secure ductility of 0.03 rad or more, the minimum total inter-story displacement angle required for the composite intermediate moment frame according to the KDS standard (KDS 41 31 00). At the slope by relative storey displacemet of 5.7%, the NRC-J specimen and the NRC-JD specimen had about 34.8% and 61.1% greater cumulative energy dissipation capacity than the RC specimen. The experimental strength of the NRC beam-column connection was evaluated to be 30% to 53% greater than the theoretical strength according to the KDS standard formula, and the standard formula evaluated the joint performance as a safety side.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.3
• /
• pp.195-214
• /
• 2020

The Samgwang Au-Ag deposit has been one of the largest deposits in Korea. The deposit consists of eight lens-shaped quartz veins which filled fractures along fault zones in Precambrian metasedimentary rock, which feature suggest that it is an orogenic-type deposit. The Ti-bearing minerals occur in wallrock (titanite, ilmenite and rutile) and laminated quartz vein (rutile). They occur minerals including biotite, muscovite, chlorite, white mica, monazite, zircon, apatite in wallrock and white mica, chlorite, arsenopyrite in laminated quartz vein. Chemical composition of titanite has maximum vaules of 3.94 wt.% (Al₂O₃), 0.49 wt.% (FeO), 0.52 wt.% (Nb₂O₅), 0.46 wt.% (Y₂O₃) and 0.43 wt.% (V₂O₅). Titanite with 0.06~0.14 (Fe/Al ratio) and 0.06~0.15 (X_Al (=Al/Al+Fe³⁺+Ti)) corresponds with metamorphic origin and low-Al variety. Chemical composition of ilmenite has maximum values of 0.07 wt.% (ZrO₂), 0.12 wt.% (HfO₂), 0.26 wt.% (Nb₂O₅), 0.04 wt.% (Sb₂O₅), 0.13 wt.% (Ta₂O₅), 2.62 wt.% (As₂O₅), 0.29 wt.% (V₂O₅), 0.12 wt.% (Al₂O₃) and 1.59 wt.% (ZnO). Chemical composition of rutile in wallrock and laminated quartz vein has maximum values of 0.35 wt.%, 0.65 wt.% (HfO₂), 2.52 wt.%, 0.19 wt.% (WO₃), 1.28 wt.%, 1.71 wt.% (Nb₂O₃), 0.03 wt.%, 0.07 wt.% (Sb₂O₃), 0.28 wt.%, 0.21 wt.% (As₂O₅), 0.68 wt.%, 0.70 wt.% (V₂O₃), 0.48 wt.%, 0.59 wt.% (Cr₂O₃), 0.70 wt.%, 1.90 wt.% (Al₂O₃) and 4.76 wt.%, 3.17 wt.% (FeO), respectively. Rutile in laminated quartz vein is higher contents (HfO₂, Nb₂O₃, As₂O₅, Cr₂O₃, Al₂O₃ and FeO) and lower content (WO₃) than rutile in wallrock. The substitutions of rutile in wallrock and laminated quatz vein are as followed : rutile in wallrock [(Fe³⁺, Al³⁺, Cr³⁺) + Hf⁴⁺ + (W⁵⁺, As⁵⁺, Nb⁵⁺) ⟵⟶ 2Ti⁴⁺ + V⁴⁺, 2Fe²⁺ + (Al³⁺, Cr³⁺) + Hf⁴⁺ + (W⁵⁺, As⁵⁺, Nb⁵⁺) ⟵⟶ 2Ti⁴⁺ + 2V⁴⁺], rutile in laminated quartz vein [(Fe³⁺, Al³⁺) + As⁵⁺ ⟵⟶ Ti⁴⁺ + V⁴⁺, (Fe³⁺, Al³⁺) + As⁵⁺ ⟵⟶ Ti⁴⁺ + Hf⁴⁺, 4(Fe³⁺, Al³⁺) ⟵⟶ Ti⁴⁺ + (W⁵⁺, Nb⁵⁺) + Cr³⁺], respectively. Based on these data, titanite, ilmenite and rutile in wallrock were formed by resolution and reconcentration of cations (W⁵⁺, Nb⁵⁺, As⁵⁺, Hf⁴⁺, V⁴⁺, Cr³⁺, Al³⁺, Fe³⁺, Fe²⁺) in minerals of wallrock during regional metamorphism. And then rutile in laminated quartz vein was formed by reconcentration of cations (Nb⁵⁺, As⁵⁺, Hf⁴⁺, Cr³⁺, Al³⁺, Fe³⁺, Fe²⁺) in alteration minerals (white mica, chlorite) and Ti-bearing minerals reaction between hydrothermal fluid originated during ductile shear and Ti-bearing minerals (titanite, ilmenite and rutile) in wallrock.