• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.749-752
• /
• 2011

본 논문에서는 현재 출시되어 있는 소프트타입의 현대 아반테 하이브리드자동차와 하드타입 방식의 도요다 프리우스 자동차를 대상으로 차대 동력계상에서 CVS-75 모드를 주행하면서 발생하는 배출가스특성과 연비특성을 실험적으로 분석하였다. 가솔린 차량에 비해 하이브리드 차량의 연비 및 배출가스 특성이 탁월하였으며 특히, 하드타입의 하이브리드 차량이 소프트타입의 차량에 비해 연비개선효과가 우수하게 나타났다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.534-537
• /
• 2008

하이브리드자동차의 연료소비율 시험 시 초기 SOC 조건에 따른 SOC와 연비 변화 특성을 파악하기 위해 2종의 차종을 선택하여 UDDS 모드주행 실험을 실시하였다. 실험결과 Strong type 자동차는 주행시작 약 550초 경과 후 SOC 52 $\sim$ 54%로 수렴하였다. 또한 일반 시가지 주행조건에서는 SOC를 50$\sim$55 % 범위에서 제어함을 알 수 있으며, 초기 SOC 조건에 따라 연비는 약 79%의 편차가 나타났다. 이는 저속구간에서 순수 전기자동차 구동이 구현됨으로써 SOC 70%에서 큰 연비 상승 효과가 나타나는 것으로 판단 된다. Mild type 자동차는 연비가 초기 SOC 조건에 따라 약 5%의 편차가 나타남을 알 수 있었으며, SOC 변화특성은 배터리 충전상태에 따라 충전량 제어는 이루어지나 가속 시 어시스트만 이루어지는 시스템적 특성상 효율적인 SOC 제어가 이루어지지 않아 연비에는 큰 영향을 주지 않는 것으로 생각된다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.8
• /
• pp.485-494
• /
• 2016

In this work, we conducted a study of fuel consumption characteristics and regenerative braking recovery rate by conducting an experiment using a TMED type parallel hybrid electric vehicle. As regenerative braking technology is considered essential to improve the energy efficiency of the hybrid vehicle, it is necessary to conduct research on the regenerative braking system. Therefore, the electrical characteristics, current balance, and fuel consumption were investigated using an EC type chassis dynamometer with experimental conditions as per IM240 mode. From the results, it was observed that when the initial SOC condition was lower, the engine operating time of the hybrid vehicle increased, and the energy efficiency decreased. While operating in the driving mode characteristics condition and the driving characteristics condition, the difference in the average fuel consumption was not significant. However, after completion of the experiment, there was a difference in the engine operation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4283-4287
• /
• 2011

This paper describes the characteristics of emissions and fuel economy of soft type hybrid vehicle (Hyundai Avante) and hard type hybrid vehicle(Toyoda, Prius) in a transient CVS-75 driving mode. Hybrid vehicles showed the better fuel economy and emission characteristics comparing the conventional gasoline vehicle. Especially, hard type hybrid vehicle showed the better fuel economy comparing soft type hybrid vehicle under 55 km/h periods in the CVS-75 mode.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.397-403
• /
• 2013

The demand for eco-friendly and higher fuel economy vehicles has helped develop eco-friendly and fuel-efficient vehicles such as hybrid vehicles. In a hybrid vehicle, the change in the battery charge after driving should be added to the fuel consumption as the equivalent fuel usage based on its own characteristics. Thus, the fuel efficiency of a hybrid vehicle cannot be improved simply by increasing the battery capacity. In this study, I attempt to improve the total fuel economy of a hybrid vehicle, including the equivalent fuel consumption, by modeling a fuel cell hybrid vehicle using Matlab Simulink, analyzing the usage zone of the fuel cell with the existing control strategy, and optimizing the power distribution of the battery and fuel cell in the main usage zone of the fuel cell.

• Journal of the Korean Institute of Gas
• /
• v.21 no.2
• /
• pp.20-25
• /
• 2017

For the HCNG bus using fuel which is the mixture gas of hydrogen and natural gas, the fuel efficiency and $CO_2$ emission characteristics were analyzed based on the WHVC test results and compared with that of the CNG and diesel buses. $CO_2$ emission characteristics were also analyzed by contribution effects such as carbon emission factor and fuel consumption. As a result, the fuel economy of HCNG bus was evaluated to be 11.5% improvement compared to CNG bus, and it was also showed equivalent to diesel bus. In addition, the $CO_2$ emission of HCNG bus was reduced 20.4% and 34.5% compared to CNG bus and diesel bus respectively. It was concluded that the $CO_2$ emission characteristics were influenced by the carbon emission factor depending on fuel composition and the fuel consumption according to the engine performance.

• Journal of the korean Society of Automotive Engineers
• /
• v.7 no.3
• /
• pp.30-35
• /
• 1985

자동차가 처음 만들어진 당시에는 목적지까지 무사히 도착하는 신뢰성이 중요한 과제가 되었으리 라 생각된다. 무사히 도착되니 다음은 어떻게 하면 빨리 도착할 수 있을까하는 요구에서 고속화 즉 기관의 고출력화가 이루어졌다. 자동차의 편리함이 인식되고 또 보급됨에 따라 자동차가 주 위한경에 미치는 영향이 문제가 되어 1960년대 후반부터 자동차배출가스규제가 시작되고 이어서 소음규제가 실시되어 점차 강화되고 있다. 1973년부터 시작된 석유위기이래 자동차의 석유사용 량을 저감시키는 목적으로 미국에서는 연비규제가 실시되기에 이르렀고 다른 국가들도 거기에 따르고 있다. 미국의 1975년 에너지정책, 보존법(Energy Policy and Conservation Act of 1975 )은 1974년의 평균연비 14mile/gallon을 1985년까지는 약 2배의 27.5mile/gallon까지 높이고자 하는 것이다. 가까운 일본에서도 약 35%정도 향상되고 있는 실정이다. 자동차의 저연비특성은 제품기능으로 점차 중요시되는 동시에 국가차원에서는 석유에너지절약의 한 방편으로 사회적으 로도 해결하여야할 입장에 이르렀다. 이 에너지 절약 문제는 자동차의 소형화를 포함한 국제 적인 자동차 재개발문제로 발전, 80년대의 신기술개발의 최대과제가 되고 있다. 또 최근의 사용 자의 요구는 운전성, 실용성에 대해서도 까다롭고 또 다양화하고 있다. 이들 요구와 엄격한 배 출가스규제 및 소용규제를 만족시키면서 연비저감을 꾀하느것인 만큼 실로 어려운 일임에는 틀 림없다. 여기서는 가솔린기관 승용차의 연비저감을 중심으로 규제의 상황, 연비의 향상기술에 대해서 논하고자 한다.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.9-18
• /
• 2014

These test methods, the current domestic vehicles fuel economy calculation method is tested on a dynamometer for vehicles after you have installed the vehicle, given the test mode(FTP-75 & HWFET mode, etc.) are measured by vehicle emissions and fuel economy by seeking to have the results approach, the carbon balance method. At this point, using the carbon balance method is a test method was developed seeking fuel for a standard fuel properties, where the value of the constant and saved test was measured in THC, CO, $CO_2$ has a value calculation. Therefore, use fuel which is changed every time you test the fuel properties characteristics are not considered exactly. In this study, using the carbon balance method and fluid flow rate of the fuel used in the actual test is measured by comparing the results with the flow measurement methods, properties of the fuel used for the test attribute to study ways that can be considered, taking into account the physical attributes of a more diverse fuel line and fuel economy improved measurement methods that can be reviewed.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.198-206
• /
• 2016

Fuel economy label will be used as a national indicator in energy management, leading to the development of car technology manufacturer and plays a role in providing consumer vehicle purchase information. But the government's fuel economy label is continued consumer complaint is different and diminishing fuel economy were introduced by the government to measure the exact fuel economy label than resetting the 5-cycle test method in the US for the domestic vehicle standards. Originally two test mode in order to reduce the impact of the sharp increase in the resources required but methods of calculating a measured result value by driving all of the five test mode a variety of environmental conditions and the running pattern is reflected to the fuel economy label (city( FTP-75 mode), highway(HWFET mode)) and using 5-cycle correction formula for calculating a fuel consumption value and the equivalent value to calculate the result of the 5-cycle test. The compensation was calculated expression 30s, 5-Cycle Test Method of vehicles in 2011 was considered necessary to review the existing 5-cycle correction formula for the New Type car due to the recent rapid development of automotive technology. In this study, recent technology is targeting 14 units New Type car applied over the same test method and the existing check test mode specific fuel economy properties and, as a result of analyzing the corrected expression differences that have already been developed with the existing test vehicle resulting large did not show the difference was found to correction formula also not getting the existing fuel correction expression significant effect on the improvement of the current automobile technology as a maximum error of less than 1.5%.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.34-35
• /
• 2007

본 논문에서는 연료전지 전기자동차(Fuel Cell Electric Vehicle)의 동력성능을 만족하면서 연비효율 향상을 목적으로 하는 견인전동기 시스템의 설계특성에 대하여 살펴본다. 특히, 차량의 요구 동력성능을 만족하는 견인전동기의 동력 설계사양 정의 및 표준운전모드를 적용한 실운전 조건에서의 연비효율 향상을 목표로 하는 견인전동기의 효율 설계사양 정의를 나타낸다.