• Korean Journal of Heritage: History & Science
• /
• v.53 no.3
• /
• pp.258-277
• /
• 2020

The purpose of this paper is to examine the paintings and symbols of the Jeju Guandeokjeong murals, Treasure No. 322. Gwandeokjeong Pavilion in Jeju is one of the oldest buildings in Jeju and was built in 1448 during the reign of King Sejong (世宗) of the Joseon Dynasty to serve as a training ground for soldiers. Unlike Gwandeokjeong Pavilions in other regions, Jeju's Gwandeokjeong Pavilion has a long history and is of cultural value due to its beautiful architecture. In addition, it contains various murals which are a further source of attention. There are four murals on the front and back of the two Lintels on the left and right sides of the building. Their contents include of 『The Three Kingdoms (三國志)』 and and on the back. Towards the right, is depicted, with on the back. Based on a replica of the murals from 1976, the plan, style, and age of the Gwandeokjeong Pavilion murals have been studied, together with their meanings. The contents of the mural are broadly divided into five parts, which are identified by the tacit signatures atop the screen, which provide such details as the painting titles. The paintings on the left and right sides of the center appear to inspire the spirit of the military's commerce in order to boost soldiers' morale, protect the country, and protect the people in line with the purpose of Gwandeokjeong Pavilion. The following and figuratively depict guidelines for the behavior and mindset of officials. In particular, is a painting concerned with concepts of longevity and an auspicious (吉祥), which shows how court paintings became popular as folk paintings at that time. The paintings of tangerines and other specialties of Jeju Island, the ritual paintings of Jeokbyeokdaejeon, and the expressions of Mt. Halla (漢拏山) and Oreum (오름) indicate the existence of Jeju artists that belonged to the Jeju government office at that time. The five themes and styles of the murals also show that the murals of Gwandeokjeong Pavilion were produced in the late 19^th and early 20^th centuries.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.337-349
• /
• 2008

Despite an improved bone reactions of Mg-incorporated implants in the animals, little yet has been carried out by the experimental investigations in functional loading conditions. This study investigated the clinical and histologic parameters of osseointegrated Mg-incorporated implants in delayed loading conditions. A total of 36 solid screw implants (diameter 3.75 mm, length 10mm) were placed in the mandibles of 6 beagle dogs. Test groups included 18 Mg-incorporated implants. Turned titanium Implants served as control. Gold crowns were inserted 3 months. Radiographic assessments and stabilitytests were performed at the time of fixture installation, $2^{nd}$ stage surgery, 1 and 3 months after loading. Histological observations and morphometrical measurements were also performed. Of 36 implants, 32 displayed no discernible mobility, corresponding to successful clinical function. There was no statistically significant difference between test implants and controls in marginal bone levels (p=0.413) and RFA values. The mean BIC % in the Mg-implants was $54.4{\pm}20.2%$. The mean BIC % in the turned implant was $48.9{\pm}8.0%$. These differences between the Mg-implant and control implant were not statistically significant (P=0.264). In the limitation of this study, bone-to-implant contact (BIC) and bone area of Mg-incorporated oxidized implant were similar to machine-turned implant. The stability analysis showed no significantly different ISQ values and marginal bone loss between two groups. Considering time-dependent bone responses of Mg-implant, it seems that Mg-implants enhanced bone responses in early loading conditions and osseointegrated similarly to cp Ti implants in delayed loading conditions. However, further investigations are necessary to obtain long-term bone response of the Mg-implant in human.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.93-99
• /
• 2019

The purpose of this study was to investigate the bond strength between PEKK(Polyetherketoneketone) and Sinfony(3M ESPE, Seefeld, Germany) the dental composite resin by proposing the three representative surface treatment methods and evaluate to see if they affect the bond strength between two materials. A total of 30 PEKK($Pekkton^{(R)}$ Ivory, $Cendres+M{\acute{e}}taux$, Bienne, Switzerland) specimens were prepared, embedded in acrylic resin, polished(P 1200 grid) to surface, and each group was divided into 10 specimens. After then, by the surface treatment method, it classified into three groups(n=10) such as Air abrasion group(PN), applying Single Bond Universal(3M ESPE) after Air abrasion(PB), applying OPAQUE(3M ESPE) after Air abrasion(PO). Then, veneering was performed by using Sinfony(3M ESPE, Seefeld, Germany). All completed specimens were allowed to rest in a $37^{\circ}C$ water bath for 24 hours. Shear bond strength of each group was measured and fracture patterns were classified. Statistic analysis was performed with One-way ANOVA followed by post hoc Scheffe tast (p<.05). Statistical analysis was performed using the SPSSWIN 21.0 program. As a result of one-way ANOVA, the average value of PB group was $27.67{\pm}4,18MPa$ and it was shown as the highest bond strength, PN and PO were $20.43{\pm}1.70$ and $19.8{\pm}4.77MPa$ each, and these were relatively low(F=18.4, P<.001), and as the post-test the Scheffe test was conducted and verified (p<.05). After examining the scheffe test, it was showed significant differences as PB>PO, PB>PN(p<.001). Through this study, in order to enhance the bonding force between PEKK and the composite resin, perform the Air abrasion and surface treatment by using Single Bond Universal(3M ESPE) is recommended, and as coMPared with other studies. And it is assumed that the increase of the application time of the Air abrasion affects the increase of the shear bond strength. Thus, further research is required.

• (The)Study of the Eastern Classic
• /
• no.57
• /
• pp.383-406
• /
• 2014

Mi-Am Yu Hee Choon (1513~1577) considered poetry as a part of his life. Therefore, this writer specifically focused on Mi-Am Yu Hee Choon's Chinese poems. The following is the conclusion from the materials discussed in this article. Mi-Am tried to understand literature in ethical perspective. The number of Chinese poems composed by Mi-Am is estimated to be about 300, and the number of pieces that this writer could find was 285. Also, Mi-Am took poem composition seriously, and put emphasis on content more than structure. Among Go Shi, Yul Shi, and Jul gu, Jul gu (especially Chil Un) is the largest in quantity, and it is presumed that he preferred Chil(seven) Un over Oh(five) Un. With regards to Go Shi, there are relatively many Jeon-Go. With regards to Jul gu, which was a poetry composing structure that Mi-Am could make the best use of, they were mostly about the daily lives. And with regards to Yul Shi, there were many poems that expressed his feelings about the real world and self-examination. Mi-Am's poems can be categorized into ones that he wrote when he was on exile, and ones that he wrote while serving for the king again after he got released from exile. During the exile period, self-discipline through learning, friendship, and love for the people were the main themes of his poems, and after being released and started serving for the king again, his poems were mostly about loyalty to the king, interaction with acquaintances, emotions, ancestor worship, self-examination, and conjugal affection through literary communion. Among Mi-Am's poems, there are many that have Eum Song Cha Un included in their titles, and the mainstream of his poems were related to daily lives or experiences. Also, most of them naturally and calmly expressed the fact itself without exaggerating. Mi-Am considered poetry as a part of his life and the fact that he practiced literary communion with his wife by writing poems about the ordinary things happened between him and his wife, Song Duk Bong, is worthy of notice.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.1
• /
• pp.1-12
• /
• 2022

Stone has been used for various purposes, such as for building stones, megaliths, ornamental stones, hunting and grinding throughout history. The global stone production amounted to around 153 million tons in 2018 excluding quarry waste, up 0.8% on year. Of them, stone residues accounted for 71%. The worldwide stone trading decreased 1.5 million tons to 56.5 million tons in 2018. The average price of stone was 34.1 USD per square meter, down 2.5% from the previous year. It's down 7% when only considering trading between the world's top twelve exporters. But in the three leading countries, Italy, Greece and Brazil, the price saw a sharp increase. In 2018, stone imports and exports totaled 815 million square meters, raising over 20 billion USD of revenue. Imports were largely led by six countries: China, Italy, Turkey, India, Brazil, Spain and Portugal, from largest to smallest.) In terms of stone use per 1,000 population, it was 117 square meters in 2001, and it increased to 264 square meters in 2017 and 266 square meters in 2018. The volume more than doubled during the period, but it has been declining slightly in recent years. China, India, Saudi Arabia and Belgium were the only countries that the stone use per 1,000 population exceeded 1,000 square meters. The increase rate was steepest in China, India and the United States, from largest to smallest. The global stone production is likely to grow to 69.85 million tons by 2025, despite the global economic downturn.