• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.1
• /
• pp.13-20
• /
• 1998

A steady-state and dynamic simulation program for a small multi-purpose turboshaft engine with the free power turbine was developed. In order to reduce developing cost, time and risk, a turbojet engine whose performance was well-known was used for the gas generator, and life time was improved by replacing turbine material and by using Larson-Miller curves. The component characteristic of the power turbine was derived from scaling the gas generator turbine. Equilibrium equations of mass flow rate and work were used for the steady-state performance analysis, and the Constant Flow Method(CMF) was used for the dynamic performance simulation. The step fuel scheduling was carried out for acceleration in the dynamic simulation. Through this simulation, it was found that the overshoot of the turbine inlet temperature exceeded over the compressor turbine limit temperature.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.616-623
• /
• 2012

Turbopump is a key component in liquid rocket engines, and reducing weight while maintaining structural safety is one of the major concerns of turbopump designers. To reduce the weight aluminium alloy castings instead of steel casings are introduced. The casting process is especially useful for enhancement of productivity and for reduction of product costs. But, since castings are used in space vehicle engines, reliability cannot be compromised therefore proper design, production process and thorough investigation should be performed to ensure structural integrity. In this study inlet casings for a fuel pump are casted with A356.0-T6 alloy and using one of them a burst test is conducted to ensure structural integrity. Structural analysis is performed for simulation, and with multiple strain gages strains are measured and compared with predictions.

• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.549-559
• /
• 2021

The Arctic Circle's huge amounts of fossil fuels and mineral resources are being developed and subjected to active construction projects. Global efforts are continuing to actively respond to climate change, but the dependence on fossil fuels remains high. This study reports a preliminary survey conducted in Alberta, Canada, where oil sand resources are actively developed. A land cover map was prepared using satellite imagery to reduce the cost and time of surveying a wide area. Results likely useful to resource development projects such as ground surface temperature and snow cover distribution were derived by using the obtained image classification results. It is expected that the results of the present research and analysis will be used to establish strategies for the successful promotion and operation of projects to develop resources in the Arctic.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1067-1073
• /
• 2021

Regulations to reduce greenhouse gas emissions from ships are gradually being strengthened. EEXI (Energy Efficiency Existing Index) has been introduced in existing ships, and various studies are aimed at achieving the greenhouse gas emission reduction target are currently underway. In this study, we proposed a method to reduce greenhouse gas emissions through reducing fuel oil consumption by applying a solar power generation system to a pure and truck carrier among existing ships engaged in international voyages. The proposed photovoltaic power generation system consists of a photovoltaic module, an energy storage system, and a power conversion device. To confirm applicability, the system was modeled through a power electronics program, and a simulation was performed. In addition, economic analysis was conducted to check the feasibility of application to real ships, and it was confirmed that significant results were derived in the economical aspect after about 11 years had elapsed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.396-396
• /
• 2023

기후 위기에 대한 대응으로 현재 많은 국가에서 2050년 탄소중립을 목표로 하고 있으며, 우리나라도 2050년까지 탄소중립을 선언하고 다양한 부문의 배출 절감 계획을 내세웠다. 현재 건물 부문에서는 2050년의 목표배출량을 6.2 백만톤 CO2eq으로 설정하고 관련 정책적 수단을 검토 중이지만 달성 방안 등에 대해서는 구체적으로 제시하지 못하고 있다. 본 연구에서는 국내 건물 부문의 이산화탄소의 배출량 산정 모델을 개발하여, 2050년까지 이산화탄소 배출 저감 시나리오를 시뮬레이션하였다. 이를 토대로 국내의 건물 부문 탄소중립 가능성을 검토한 통합 시나리오를 제시하고, 향후 정책 및 기술 개발의 방향성을 제시한다. 탄소배출량 산정모델은 연면적 예측 및 사용 에너지의 원단위 환산, 탄소배출계수 등을 고려해 개발하였고, 이를 활용하여 4가지 탄소배출 시나리오를 분석하였다. 먼저 현재 정책 기반 탄소 배출 시나리오는 탄소중립에 이르지 못하여 더 강화된 시나리오의 필요성을 보여준다. 신규 건물을 대상으로 한 제로 에너지화 제도 기반 시나리오는 전체 탄소배출량에 큰 기여를 하지 못하며, 기존 건물 대상의 그린 리모델링 제도 기반 시나리오에서는 10년 이상 건물에 50% 이상의 높은 에너지 효율 개선을 시행해야 한다는 결과를 도출하였다. 또한 전기화 시나리오에서는 화석연료와 전력의 탄소배출계수를 비교하여 적절한 에너지 전환 시점을 계산하였다. 그 결과, 건물 부문에서 2050년까지 탄소배출량 감축 목표 달성을 위해 신축 건물의 에너지 자립율 100%, 에너지 전환 계획과 연동한 건물의 전기화, 그리고 그린리모델링을 통한 효율 개선 기준을 47% 이상 달성하는 조건을 만족해야 한다는 결과를 얻었다. 이 연구는 도전적인 온실가스 감축 마련의 필요성을 제시하였으며, 탄소중립 가능성을 제시하여 실질적인 감축정책에 기여할 것으로 기대한다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.210-215
• /
• 2023

Raw mix burnability is an especially crucial factor in cement manufacturing technology, and it depends on the physical, chemical and mineralogical properties of each raw material. In this article, we compared the difference of burnability between the domestic and Japanese fly ash as cement raw materials by using Lafarge and Polysius evaluation method. Regardless of the type or amount of fly ash used, it was found to be more combustible when using fly ash. In both case, burnability improves as the amount of fly ash increases, especially the improvement in bunarbility is remarkable up to 3%. In conclusion, as the amount of fly ash increases within the range allowed by cement quality, burnability of raw materials improves, and thus the fuel cost required for the firing of clinker can also be expected to be reduced.

• Composites Research
• /
• v.37 no.2
• /
• pp.115-125
• /
• 2024

As global issues and interest in the environment increase, the transition to eco-friendly materials is accelerating in the automobile industry. In the automotive industry, eco-friendly composite materials are mainly used in various interior and exterior components, reducing the reliance on traditional petroleum-based materials. In particular, natural fiber composites help reduce fuel consumption and greenhouse gas emissions by making vehicles lighter. Additionally, they boast superior thermal properties and durability compared to non-recyclable composite materials, making them suitable for automotive interior parts. Furthermore, reduced production costs and sustainability are key advantages of natural fiber composites. The eco-friendly composites market is expected to grow to $86.43 billion at a CAGR of 15.3% from 2022 to 2030, and the natural fiber composites market is predicted to grow at a CAGR of 5.3% from 2023 to 2028 to $424 million. In this review paper, we explore research trends in nextgeneration natural fiber composite materials for automobiles and their application in the actual automobile industry.

• Journal of the Korean Institute of Gas
• /
• v.28 no.2
• /
• pp.32-37
• /
• 2024

Recently, transportations using hydrogen energy is being researched for the alternative energy of fossil fuels. To use them, processes of producing, storing and transferring are required. When carrying them in liquid under 90 MPa pressure, it costs less than in a gas status. Thus, a hydrogen pump is necessary and in this research we predicted the flow in the chamber using finite element methods (FEM) program ANSYS. As a result, when the valve was opened by 3 mm, between the 1^st chamber and the 2^nd chamber, the maximum velocity was decreased to 8.111 m/s by 10.6% (without valve, 9.075 m/s). In addition, pressure was also increased to 0.63 MPa by 1.6% (without valve, 0.62 MPa). When using these results, more efficient processes would be possible in designing them in detail.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.217-225
• /
• 2015

Local heating system providing hot air locally to growing parts including shoot apex and flower cluster which were temperature-sensitive organs of cherry tomato was developed to reduce energy consumption for greenhouse heating without decline of crop growth. Growing part following local heating system was composed of double duct distributer which connected inner and outer ducts with hot air heater and winder which moved ducts up and down following growing parts with plant growth. Growing part local heating system was compared with conventional bottom duct heating system with respect to distributions of air and leaf surface temperatures according to height, growth characteristics and energy consumption. By growing part local heating, air temperature around growing part was maintained $0.9{\sim}2.0^{\circ}C$ higher than that of lower part of crop and leaf surface temperature was also stratified according to height. Investigations on crop growth characteristics and crop yield showed no statistically significant difference except for plant height between bottom duct heating and growing part local heating. As a result, the growing part local heating system consumed 23.7% less heating energy than the bottom duct heating system without decrease of crop yield.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.48-59
• /
• 2018

This study was conducted to suggest the effective management and recycling processes of coffee waste, which can be easily obtained from coffee shops and coffee-related products industries. Prior to the fabrication of pellets, the potential of coffee waste as a raw material of pellet was investigated through the examination of its chemical compositions and fuel characteristics. Major gradient included in coffee waste was holocellulose, followed by fat/oil and protein. Coffee waste contained a small quantity of ash (0.7%), such as calcium, sodium, potassium and magnesium. Interestingly, coffee waste was easily dried probably due to its porous structure. Pellets fabricated with coffee waste and larch sawdust showed good fuel characteristics, such as moisture content, ash content, density and durability. The pellets exceed greatly the minimum requirements of $1^{st}$-grade wood pellet standard designated by National Institute of Forest Science (NIFOS). Particularly, the high calorific value of coffee waste showed the potential as a raw material of pellet. However, owing to high nitrogen and sulfur contents, coffee waste is like to be used as a raw material of wood pellet for combined heat and power plants equipped with a reduction system of $NO_x$ and $SO_x$ gases. On the other hand, 91 wt% larch sawdust and 9 wt% coffee waste are required to fabricate the $1^{st}$-grade wood pellets designated by NIFOS. Pellets fabricated with the conditions are estimated to have nitrogen content of 0.298% and sulfur content of 0.03%. Lastly, if amounts of coffee waste and sawdust in the production of wood pellets are adequately adjusted according to its purchasing price, the manufacturing cost of pellet can effectively be reduced. In addition, it is expected tp prepare the effective recycling process of waste and to relieve the environmental burden with the reduction of waste from the commercialization of coffee waste/larch pellets.