• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.73-79
• /
• 1996

현재의 원전 운용은 연료주기 비용을 최소화하여 경제성을 향상시키는 것이 세계적인 추세이다. 따라서 영광 3, 4호기 이후의 국내 원전 건설의 대부분이 될 한국 표준형 원전을 대상으로 하여, 현재 개발 중이거나 이미 실용화된 개량 원전 연료의 특성을 적용하여 실제 노심해석을 수행하고. 이에 따른 경제성 분석을 수행하였다. 노심해석은 현재의 영광 3, 4호기에 장전된 CE형 연료 및 장주기용 개량연료를 초기노심 및 평형 노심에 각각 장전하는 경우에 대하여 수행하였다. 가연성 흡수체는 현재 사용중인 Gadolinia 및 Integral Fuel Burnable Absorber(IFBA) 가연성 흡수체를 사용하여 분석하였다. 그 결과 현재의 CE형 연료에서 사용하는 0.382" 연료봉보다 0.374"의 연료봉이 중성자 경제성 측면에서 유리하며, Gadolinia보다 IFBA가 반경방향 첨두출력 계수의 제어를 쉽게할 수 있슴이 밝혀졌다. 그 외에 열적 여유도 증진을 위한 유량 혼합 날개의 채용과 고연소도를 위한 새로운 피복관 재료의 사용이 요청된다. 이상과 같은 결과는 향후 표준형 원전의 장주기용 개량연료를 위한 개발 방향으로 제시될 수 있다. 제시될 수 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.97.2-97.2
• /
• 2011

본 연구는 연료전지 중 용융탄산염을 전해질로 하는 MCFC의 MBOP에 포함된 부품으로 매우 중요한 역할을 하는 가습기와 이때 발생되는 폐열을 회수하기 위한 장치인 HRU에 관한 것이다. 가습기는 연료와 물이 가습기 상부로 유입되어 가습기 하부로 유입되는 배가스와 열교환을 하면서 물이 스팀화 되어 연료가 가습된 상태로 가습기 출구로 일정온도를 유지하며 배출된다. 또한 HRU는 가습기에서 배출된 고온의 배가스를 물을 이용하여 열교환을 통해서 열을 회수하여 난방 및 온수로 사용할 수 있는 열교환 장치를 말한다. 먼저 이들의 특성을 파악하기 위해 가습기 및 HRU를 설계, 제작하여 각각의 특성을 확인하였다. 가습기와 HRU의 성능 향상을 위해 먼저 열교환부에 적용될 튜브의 수치해석적 분석을 통해서 최적의 열전달 성능을 얻을 수 있는 가습기 및 HRU를 설계, 제작하였으며 이들의 성능을 파악하기 위해 120,000kcal/h 용량을 테스트 할 수 있는 장치를 구축하여, 이들의 열전달 특성, 압력강하, 회수 열량, 가습기 온도 등의 특성을 파악하였다. 이 장치를 통해서 확인된 가습기와 HRU의 특성은 수치해석을 통해서 얻은 값과 거의 유사함을 확인할 수 있었으며, 가습 성능도 효과적으로 달성할 수 있었다. 가습기와 HRU의 특성 중 압력강하 부분은 지속적인 연구가 필요한 부분이며, 가습기와 HRU의 일체화를 통하여 소형화 및 설치공간 축소 효과를 얻을 것으로 본다.

• Analytical Science and Technology
• /
• v.15 no.5
• /
• pp.427-432
• /
• 2002

The combustion behavior of heavy oil and its emulsion with water was evaluated. The concentration of $SO_x$ in the combustion gas of emulsion oil was reduced to 57% with respect to that of the combustion gas from neat heavy oil. Also, the concentration of $NO_x$ in the combustion gas of emulsion oil was reduced to 67% with respect to that of the combustion gas of neat heavy oil. These reductions of $SO_x$ in the combustion gas of emulsion oil seems to be due to the reaction with salts included in surfactant of emulsion oil. Also, the combustion efficiency of emulsion oil is evaluated to be about 6% higher than that of neat heavy oil.

• Nuclear Engineering and Technology
• /
• v.25 no.2
• /
• pp.292-299
• /
• 1993

원자로 노심내 핵 연료봉의 정확한 온도 분포를 구하기 위해서는 핵 연료봉 주위의 난류 유동장에 대한 해석이 필요하다. 난류 유동장의 특성을 파악하기 위해 실험적 연구와 해석적 방법에 의한 연구가 함께 수행되고 있다. 본 기고문은 현재까지 보고된 난류 유동장의 특성을 알아보고 해석적 방법의 연구 동향과 문제점을 분석하여 이 분야에 대한 연구 활동에 도움이 되고자 한다.

• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.237-242
• /
• 2009

Various type of alternative fuel have been developed due to exhaustion of fossil fuel reserves and high oil price. Biodiesel is produced from the reaction of triglyceride, which is main component of animal fat and vegetable oil, and methanol by methanolysis as it is known for eco- friendly fuel for alternative petrodiesel. In this work, it was analyzed for the characteristics of the blended biodiesel with domestic petrodiesel according to blending ratio. Density, kinematic viscosity and flash point were increased with increasing the content of biodiesel. But the characteristic of blended biodiesel fuel were changed to aggravate in low temperature. Also, the derived cetane number(DCN) from IQT was increased by added biodiesel. Especially, the DCN of biodiesel from palm oil showed 71.26.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.269-274
• /
• 2010

As a preliminary study on a SOFC-GT hybrid system integrated a with coal-gasification system, the influence of the concentrations of $H_2$ and CO in syngas on the performance characteristics of the hybrid system is investigated. It is expected that the differences in the heating values of fuels with different compositions trigger the off-design operation of the gas turbine and result in different performance characteristics of the overall hybrid system. Syngas compositions are found to affect the SOFC performance. Performance of hybrid system with carbon monoxide is poorer than the case with hydrogen. In the case of part-load performance with syngas, performance degradation at part-load operating conditions with hydrogen is more dominant than the case with carbon monoxide.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.489-494
• /
• 2017

This paper describes the combustion characteristics of aluminized paraffin fuel on the contents of micron-sized aluminum particles with nominal diameters of $8{\mu}m$. Aluminized paraffin fuels with mixture ratio of aluminum 0 wt%, 5 wt% and 10 wt% as fuel and GOx(Gaseous Oxygen) as oxidizer were used to perform the experiments. The experimental investigations were performed on the regression rate, the chamber pressure and the combustion efficiency. Increasing a content of micron-sized aluminum particles, the results of regression rate, chamber pressure and combustion efficiency show minor increase compared to those without particles.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.1
• /
• pp.19-26
• /
• 2010

A PEMFC(proton exchange membrane fuel cell) is a good candidate for residential power generation to be coped with the shortage of fossil fuel and green house gas emission. The attractive benefit of the PEMFC is to produce electric power as well as hot water for home usage. The thermal management of PEMFC for RPG is to utilize the heat of PEMFC so that the PEMFC can be operated at its optimal efficiency. In this study, thermal management system of PEMFC stack is modeled to understand the dynamic response during load change. The thermal management system of PEMFC for RPGFC is composed of two cooling circuits, one for controling the fuel cell temperature and the other for heating up the water for home usage. The different operating strategy is applied for each cooling circuit considering the duty of those two circuits. Even though the capacity of PEMFC system (1kW) is enough to supply hot domestic water for residence, heat-up of reservior takes some hours. Therefore, in this study, time schedule of the simulation reflects the heat-up process. Dynamic responses and operating strategies of the PEMFC system are investigated during load changes.

• Environmental and Resource Economics Review
• /
• v.29 no.4
• /
• pp.469-497
• /
• 2020

More than one-third of the world's population still has no access to clean cooking facilities despite global interest and efforts to expand the accessibility of clean cooking fuels. They use traditional biomass, i.e., crops, animal dung and firewood, as their cooking fuel, and the health and economic damage from it is severe. As many studies have been conducted to understand the choice and transition of cooking fuel in developing countries, characteristics of household head have been addressed as one of the main fuel determinants. However, decision-making in households is not only made by household head and can vary depending on the relative characteristics of household members. Thus, this study analyses the determinants of cooking fuel choice through the samples of Cambodian couples(household head and his/her spouse) considering both characteristics of husbands and wives. As a result, it is confirmed that the effects of characteristics, such as employment, education levels, and frequency of media use, between husbands and wives on cooking fuel choice were different. This study is expected to contribute to the development of more sophisticated policies to increase clean fuel in Cambodia, given that it takes into account the characteristics of spouses who have not previously been dealt with in analyzing the determinants of cooking fuel choice and that it is difficult to find research on Cambodia.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1081-1089
• /
• 2005

In order to examine the application feasibility of Orimulsion fuel in a commercial boiler using heavy fuel oil, a numerical and experimental research efforts have been made especially to figure out the fundamental combustion characteristics of this fuel in a small-scale boiler. One of the notable combustion features of Orimulsion fuel is the delayed appearance of flame location with the flame shape of rather broad distribution, which is found experimentally and confirmed by numerical calculation. This kind of flame characteristics is considered due to the high moisture content included inherently in the process of Orimulsion manufacture together with micro-explosion by the existence of fine water droplets. In order to investigate the effect on the combustion characteristics of Orimulsion, a series of parametric investigation have been made in terms of important design and operational variables such as injected amount of fuel, types of atomization fluid, and phonemenological radiation model employed in the calculation, etc. The delayed feature of peak flame can be alleviated by the adjustment of the flow rate of injected fuel and the generating features of CO, $SO_2$ and NO gases are also evaluated in the boiler. When the steam injection as atomizing fluid is used, the combustion process is stabilized with the reduced region of high flame temperature. In general, the calculation results are physically acceptable and consistent but some refinements of phenomenological models are necessary for the better resolution of pollutant formation. From the results of this small-scale Orimulsion boiler, it is believed that a number of useful information are obtained with the working computer program for the near future application of Orimulsion fuel to a conventional boiler.