• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.50.2-50.2
• /
• 2011

자동차용 CNG 연료탱크의 복합재료 중앙부 표면에 150 kHz 공진형 음향방출센서를 부착하고, 물을 매질로 하여 용기의 내압을 단계적으로 상승시켜 가면서 각 단계에서 일정시간 압력을 유지시키고 그 때 발생하는 음향방출신호를 획득하였다. 이 때 획득한 음향방출신호의 amplitude, count, duration 및 risetime 등과 같은 음향방출 변수들의 분포를 살펴본 결과 복합재료 압력용기의 손상메커니즘을 추정하고 손상정도를 평가하는데 유용하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.7
• /
• pp.843-850
• /
• 2010

A spacer grid assembly is one of the most important structural components of the nuclear fuel assembly of a Pressurized Water Reactor (PWR). A primary design requirement is that the fuel rod integrity be maintained by the spacer grid assembly during the operation of the reactor. In this study, we suggested a new spacer grid assembly having a fuel rod support, which is capable of sliding when the fuel rod vibrates due to flow-induced vibrations in the reactor. By adjusting the relative displacement between the fuel rod and its support, the proposed design will help in reducing fuel rod fretting damage.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.496-497
• /
• 2011

고체산화물 연료전지(SOFC)는 다른 연료전지에 비해 발전효율이 높고, 전력뿐 아니라 물과 열이 부산물로 생성되어 활용할 수 있는 장점이 있다. 또한, 다양한 연료를 사용할 수 있어 향후 대용량 발전용 연료전지에 적합한 특징을 가진다. 하지만 아직 Stack의 가격이 매우 비싸고, 실제의 Stack이 있다하더라도 연구 중의 손상 위험을 감수해야 한다. 따라서 SOFC Stack을 대신 할 수 있는 가상의 SOFC 시스템 구현을 통해, 저렴한 비용으로 실제의 SOFC 시스템과 유사한 환경을 구축하여 비교할 수 있다. SOFC Stack의 최대출력 DC 1kW급을 목표 대상으로 하여, 48V, 25A의 DC 출력이 가능한 Programmable DC Power Supply 설계 및 시리얼 통신을 이용한 인터페이스 보드를 제작하였고, SOFC Stack Modeling 및 GUI 구성을 하였다. 구현된 SOFC 시뮬레이터를 통해 상용의 인버터를 이용한 계통출력 전력과 실제 Stack 실험결과 비교로, 제작한 시스템이 향 후 SOFC 시스템을 위한 시험 및 연구에 응용 가능함을 입증하였다.

• Composites Research
• /
• v.25 no.4
• /
• pp.105-109
• /
• 2012

Recently, development of a small aircraft has been carried out for the BASA(Bilateral Aviation Safety Agreement) program in Korea. This aircraft adopted all composite structures for environmental friendly by low fuel consumption due to its lightness behavior. However the composite structure has disadvantage which is very weak against impact damages. Therefore, damage allowable design of aircraft structure must be performed considering compressive fracture strength. This point is very important for certification of composite structure aircraft. In this paper, it is performed the research on damage tolerance of thick laminate adopting aircraft structure. The damage tolerance of three different types of thick laminates such as no damage, open hole and impact damage is evaluated under compression loading.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.04a
• /
• pp.4-4
• /
• 1999

최근 충남대에서는 다양한 추진제와 연소 조건으로 액체로켓 연소 실험이 진행되고 있으며 그에 비례하여 많은 사고들이 발생하고 있다. 한 예로 GO$_2$/kerosene을 추진제로 하는 노즐삭마 시험용 로켓엔진(추력 1001bf, 연소실 압력 600psia) 개발 중에 화염이 인젝터면에 형성되어 인젝터면을 손상시키는 사고를 여러 번 경험하게 되었다. 본 연구는 인젝터 손상의 원인을 규명하여 안정적인 인젝터 설계에 도움을 주기 위한 목적으로 실험용 동축 인젝터를 제작하여 화염 부상 특성을 실험적으로 연구하였다. 사용된 인젝터는 연료인 Kerosene을 접선형 선회기로부터 90$^{\circ}$의 원뿔 각을 가지고 분무되도록 설계하였으며, 그 주위로 산하제인 GO$_2$가 연소실의 축방향에 수평하게 분무되도록 설계하였다. 2-유체 동축 인젝터의 난류 확산 화염에서 연료와 산화제의 혼합은 화염 특성을 결정하는 주요 변수이므로 인젝터로부터 분무되는 추진제간의 유량을 변화시켜 화염 부상 특성을 연구하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.7
• /
• pp.616-622
• /
• 2012

In this paper, we examined the problems of the flare operation of tactic maneuvering flight of fighter aircraft with 150GL center external fuel tank and proposed the possible solution of it's operation. The damage scope of horizontal fin of fuel tank and flare trajectory when the flare ejected from the maneuvering aircraft were analyzed by the wind tunnel test and the numerical analysis. We investigated the two different option to avoid the damage of fin; i) the adjustment of flare dispenser angle and ii) the change of horizontal fin's shape. For the considering of practical operation of present system, we chose the second option. We estimated the drop safety of external fuel tank with redesigned fin by the wind tunnel experiments.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2002.11a
• /
• pp.39-44
• /
• 2002

배기가스의 규제가 전 세계적으로 강화되고 있는 가운데, 경유사용 디젤기관은 가솔린기관 보다 열효율이 높고 온실가스인 $CO_2$ 배출량이 적은 장점이 있으나, PM(입자상 물질)과 NO$_{x}$가 다량 배출되는 단점이 있다. 이들의 저감책으로서, 엔진개량, 연료분사장치의 고압화와 전자제어화, 배기 후처리기술의 적용 등 디젤기관의 고효율성을 손상시키지 않으면서, 배기공해를 대폭 저감하려는 연구가 활발히 추진되고 있으며, 한편으로는 디젤기관의 대체연료에 대한 연구가 활발히 추진되고 있다.(중략)

• Journal of Energy Engineering
• /
• v.27 no.2
• /
• pp.1-13
• /
• 2018

The proportion of natural gas-fueled power generation is expanding due to the change of domestic energy policy pursuing reduction of dust and increasing clean energy consumption. Natural gas fuels used for the combined-cycle power plants and the district-heating power plants are operated at high temperature and high pressure in the fuel supply system. Accidents due to leakage of the gas such as fire and explosion should be prevented by applying risk management techniques. In this study, risk assessment was performed on the natural gas fuel supply system of a combined power plant based on the API RP 581 RBI code. For the application of the API RBI code, lines and segments of the evaluation target system were identified. Operational data and input information were analyzed for the calculations of probability of failure and consequence of failure. The results of the risk assessment were analyzed over time from the initial installation time. In the code-based evaluation, the gas fuel supply system was mainly affected by thinning, external damage, and mechanical fatigue damage mechanisms. As the operating time passes, the risk is expected to increase due to the external damage caused by the CUI(Corrosion Under Insulation).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.1
• /
• pp.65-70
• /
• 2001

As consumption rate of energy increase rapidly, the facilities of fuel storage tank become large size. Almost all of the industry or public facilities storing fuel in underground fuel storage tank is manufactured by steel materials. Thus, this fuel storage tank made of steel materials is damaged by stray-current corrosion, it become destruction. If fuel storage tank is destructed, petroleum, oil and gas are leaked. So it bring about environmental pollution, energy loss, fire and explosion. Therefor, in this study, for study on the prevention of corrosion damage in underground fuel storage tank, it were investigated by corrosion and stray-current corrosion for SS 400 in dry sea sand and wet sea sand along to specific resistance. The main results obtained are as follows : As specific resistance decrease in wet sea sand, corrosion rate per year increase linearly, in case of back fill up wet sea sand in underground fuel storage tank, if the water is flow into dry sea sand, corrosion tendency of underground fuel storage tank is supposed sensitive.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.105-108
• /
• 2011

The increased concern for the security of the oil supply and the negative impact of fossil fuels on the environment, particularly greenhouse gas emissions, has put pressure on society to find renewable fuel alternatives. Compared to the traditional biofuel, ethanol, higher alcohols offer advantage as gasoline substitutes because of their higher energy density and lower hygroscopicity. For this reason, microbial fermentation is known as potential producers for sustainable energy carriers. In this study, bacterial responses including cellular and molecular toxicity were studied in three different microorganisms, such as Escherichia coli, Clostridium acetobutylicum, and Saccharomyces cerevisiae. In this study, it was analyzed specific stress responses caused by ethanol and buthanol using four different stress responsive genes, i.e. fabA, grpE, katG and recA. The expression levels of these genes were quantified by semi-quantitative reverse transcription-PCR. It was found that four genes have shown different responsive patterns when E. coli cultures were under stressful conditions caused by ethanol and buthanol, respectively. Therefore, in this study, the stress responsive effects caused by these alcohols and the extent of each stress response can be analyzed using the expression levels and patterns of different stress responsive genes.