• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.530-533
• /
• 2008

배출가스 및 이산화탄소 등 환경규제 강화와 에너지 고갈 문제는 기존의 내연기관, 동력전달장치, 소재 등의 성능 향상과 함께 대체에너지를 사용하는 자동차의 필요성이 증가하고 있으며, 이에 따라 수소연료전지자동차 등의 상용화가 요구되고 있다. 기존 자동차와는 패러다임이 전혀 다른 수소연료전지자동차는 현재 다양한 방향으로 연구 개발되고 있으므로 수소연료전지자동차 관련 평가기술 중 연료소비율 측정방법도 그에 따라 개발되고 진행되어야 할 것이나 현재 국내에 이와 관련한 체계적인 연구가 미미한 실정이며, 국제적인 표준도 현재 설정되어 있지 않은 상황이다. 따라서 현재까지 진행 중인 수소연료전지자동차 연료소비율 측정방법에 대한 기준 동향 및 연구 사례 조사를 통해 관련 연구 계획의 수립과 향후 수소연료전지자동차 연료소비율에 대한 평가기술 도출을 위한 기초 자료로 활용하기 위하여 본 연구를 수행하였다.

• Journal of the KSME
• /
• v.28 no.5
• /
• pp.469-475
• /
• 1988

연료소비율의 향상은 점차 감소되어 가는 경향에 있다. 그 원인은 3원촉매변환기 채용에 의한 이론공기연료비의 사용, 기관의 연소개선이 발전하여 고압축비화에 의한 연료소비율 향상이 더 이상 어렵게 되었다는 점을 들 수 있다. 한편, 고압축비화의 역효과로는 연소실내 최고압력이 증가하여 각부의 강도나 기관 소음의 문제가 대두된다. 이들 역효과를 타파하여 충분한 연료 소비 향상을 얻을 수 있는 수단이 단기적인 과제가 될 것이다. 전자제어, 희박연소, 마찰저감 등 통상의 엔진의 개량에 대한 노력이 계속될 것이다.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.101-101
• /
• 2017

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1035-1040
• /
• 2011

In this study, many researches have been carried out against Energy Efficiency Operational Indicator(EEOI) of existing ships under discussion by IMO. This research is examined the method for the polices about IMO's greenhouse gas reducing emissions among them, we were analyzed the EEOI for existing ships. we have analyzed the result about applying EEOI using the calculation method of the rate of fuel consumption for cargo quantities to the actual existing ships and raised the problem. Based on this research, we were presented the improved EEOI about the engine load using fuel consumption and applied the existing ships. As a result, we concluded that the improved EEOI can define a resonable rate of $CO_2$ emissions.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.636-639
• /
• 2009

Fuel consumption measurement of Hydrogen fuel cell vehicle is considerably different form internal combustion engine vehicle such as carbon balance method. A practical method of fuel Consumption measurement has been developed for Hydrogen fuel cell vehicles. There are three method of hydrogen fuel consumption testing, gravimetric, PVT(Pressure, Volume and temperature), and Coriolis mass flow, all of which necessitate physical measurements of the fuel supply. The purpose of this research is to measure the fuel consumption of hydrogen fuel cell vehicles on chassis-dynamometer and to give information when the research is intended to develop method to measure hydrogen fuel consumption.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.1
• /
• pp.45-51
• /
• 2015

In order to meet the enforced emission regulations and reduce fuel consumption, various new technologies are employed in engines. The problem of NOx emissions under a lean mixture condition should be solved, because a lean-burn direct-injection engine can realize stable lean combustion with a stratified mixture, which results in improvements in fuel economy and emissions. This study investigated the effects of intake and exhaust valve timing changes on the performance and emission characteristics of a lean-burn LPG direct-injection engine. Under a partial-load operating condition without throttling, an increase in the intake valve opening led to an increase in NOx emissions due to an increase in the amount of excess air. The fuel consumption deteriorated with an increase in the exhaust valve opening due to a decrease in the expansion work and an increase in the pumping loss.

• Journal of Energy Engineering
• /
• v.11 no.2
• /
• pp.178-185
• /
• 2002

The object of this paper is to investigate the effects of early fuel evaporators on cold driveability of gasoline passenger cars. Experiment has been carried out for the assessment cold start performance and cold driveability. And fuel consumption rate, emission and cylinder pressure were measured. On the base of combustion pressure of cylinder, rate of heat release, cumulative heat release amount and burned mass fraction are evaluated. The results show that fuel consumption rate is increased by 17.7%, monoxide and hydrocarbon were reduced by 23% and by 45% respectively, fluctuations of indicated mean effective pressure and maximum combustion pressure were increased by 4∼6%, fuel consumption rate per power was improved by 0.2∼2.3%. These are caused by the fact maximum heat release period and main combustion period are getting short.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.18-18
• /
• 2000

산업용 가스터빈에서 대기로 방출되는 배기열을 효과적으로 이용하기 위한 역 브레이튼 사이클 가스터빈(Reverse Brayton Cycle Gas Turbine) 엔진의 출력과 비연료 소비율 및 열효율을 기본 브레이튼 사이클 엔진, 재열사이클에 역 브레이튼 사이클을 추가한 엔진, 역 브레이튼 사이클에 중간냉각기를 추가한 엔진의 출력, 비연료 소비율 및 열효율을 비교하였다.(중략)

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.2
• /
• pp.82-86
• /
• 1989

This paper is concerned with the effects of temperature of diesel fuel on combustion characteristics and engine performance in a home-made precombustion diesel engine for small-sized fishing boat. The results may be summarized as follows: 1. The fuel injection timing was delayed with increase in temperature for diesel fuel, and remarkably delayed at low load. 2. The point of maximum pressure was delayed with increase in temperature for diesel fuel, the maximum pressure decreased with increase in temperature for diesel fuel but increased with increase in load. 3. The brake specific fuel comsumption (BSFC) decreased with increase in load, the optimum temperature of the heated fuel was about 15$0^{\circ}C$. 4. The smoke emissions increased with increase in load and temperature for diesel fuel.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.2
• /
• pp.194-201
• /
• 2008

In the present study, fuel system matching was analyzed, and a characteristic chart for common use for design-related parts is presented. Based on the characteristic chart thus presented, controlled fuel system matching was tested for a 35-liter fuel system, and actual mass product movement coils were applied to validate the test. The keynote of the present research is the use of the characteristic chart to devise a preferred fuel system matching method. Through the present study, it will be possible to design standard parts for efficient fuel system matching in the near future.