• Journal of the Korean Geotechnical Society
• /
• v.35 no.5
• /
• pp.5-19
• /
• 2019

Considering the natural phenomenon in which steep slopes ($65^{\circ}{\sim}85^{\circ}$) consisting of rock mass remain stable for decades, slopes steeper than 1:0.5 (the standard of slope angle for blast rock) may be applied in geotechnical conditions which are similar to those above at the design and initial construction stages. In the process of analysing the stability of a good to fair continuum rock slope that can be designed as a steep slope, a general method of estimating rock mass strength properties from design practice perspective was required. Practical and genealized engineering methods of determining the properties of a rock mass are important for a good continuum rock slope that can be designed as a steep slope. The Genealized Hoek-Brown (H-B) failure criterion and GSI (Geological Strength Index), which were revised and supplemented by Hoek et al. (2002), were assessed as rock mass characterization systems fully taking into account the effects of discontinuities, and were widely utilized as a method for calculating equivalent Mohr-Coulomb shear strength (balancing the areas) according to stress changes. The concept of calculating equivalent M-C shear strength according to the change of confining stress range was proposed, and on a slope, the equivalent shear strength changes sensitively with changes in the maximum confining stress (${{\sigma}^{\prime}}_{3max}$ or normal stress), making it difficult to use it in practical design. In this study, the method of estimating the strength properties (an iso-angle division method) that can be applied universally within the maximum confining stress range for a good to fair continuum rock mass slope is proposed by applying the H-B failure criterion. In order to assess the validity and applicability of the proposed method of estimating the shear strength (A), the rock slope, which is a study object, was selected as the type of rock (igneous, metamorphic, sedimentary) on the steep slope near the existing working design site. It is compared and analyzed with the equivalent M-C shear strength (balancing the areas) proposed by Hoek. The equivalent M-C shear strength of the balancing the areas method and iso-angle division method was estimated using the RocLab program (geotechnical properties calculation software based on the H-B failure criterion (2002)) by using the basic data of the laboratory rock triaxial compression test at the existing working design site and the face mapping of discontinuities on the rock slope of study area. The calculated equivalent M-C shear strength of the balancing the areas method was interlinked to show very large or small cohesion and internal friction angles (generally, greater than $45^{\circ}$). The equivalent M-C shear strength of the iso-angle division is in-between the equivalent M-C shear properties of the balancing the areas, and the internal friction angles show a range of $30^{\circ}$ to $42^{\circ}$. We compared and analyzed the shear strength (A) of the iso-angle division method at the study area with the shear strength (B) of the existing working design site with similar or the same grade RMR each other. The application of the proposed iso-angle division method was indirectly evaluated through the results of the stability analysis (limit equilibrium analysis and finite element analysis) applied with these the strength properties. The difference between A and B of the shear strength is about 10%. LEM results (in wet condition) showed that Fs (A) = 14.08~58.22 (average 32.9) and Fs (B) = 18.39~60.04 (average 32.2), which were similar in accordance with the same rock types. As a result of FEM, displacement (A) = 0.13~0.65 mm (average 0.27 mm) and displacement (B) = 0.14~1.07 mm (average 0.37 mm). Using the GSI and Hoek-Brown failure criterion, the significant result could be identified in the application evaluation. Therefore, the strength properties of rock mass estimated by the iso-angle division method could be applied with practical shear strength.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.118-127
• /
• 2010

Resistivity logging instruments are designed to measure the electrical resistivity of a formation, and this can be directly interpreted to provide a water-saturation profile. However, resistivity logs are sensitive to borehole and shoulder-bed effects, which often result in misinterpretation of the results. These effects are emphasised more in the presence of tool eccentricity. For precise interpretation of short- and long-normal logging measurements in the presence of tool eccentricity, we simulate and analyse eccentricity effects by combining the use of a Fourier series expansion in a new system of coordinates with a 2D goal-oriented high-order self-adaptive hp finite-element refinement strategy, where h denotes the element size and p the polynomial order of approximation within each element. The algorithm automatically performs local mesh refinement to construct an optimal grid for the problem under consideration. In addition, the proper combination of h and p refinements produces highly accurate simulations even in the presence of high electrical resistivity contrasts. Numerical results demonstrate that our algorithm provides highly accurate and reliable simulation results. Eccentricity effects are more noticeable when the borehole is large or resistive, or when the formation is highly conductive.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1440-1444
• /
• 2005

본 연구는 일반적인 수문모형 및 수자원 관련 모형들의 초기세팅시 모형별로 사용되는 각기 다른 형태의 입력자료 대한 활용성을 용이하게 하고 실제 시스템에 적용하여 모형의 활용성을 높이고자 하는데 있다. 특히 현재 한국수자원공사 데이터베이스의 수문자료는 각종 수문모형 및 수자원 관련 시스템에 직접 사용하기에는 모형의 입력 포맷 형태가 너무나 다양하기 때문에 그 한계가 있다. 자료의 형태 대부분이 Raw data의 형식으로 이루어져 있어 모형 입력을 위한 선행 자료처리가 불가피하며, 이로 인해 실질적인 유출해석의 정확성을 높이는 연구 또는 수문학적 분석을 위한 연구등의 학술적인 측면에 초점이 맞추어지기보다 오히려 입력자료 구축에 많은 시간이 투입되는 것이 사실이다. 그 예로 실시간 물관리 운영 시스템(IRWMS)에서 유역유출 모형으로 사용 중인 SSARR모형의 강우 입력자료로는 유역평균강우량(MAP)이 사용된다. 한편 데이터베이스에는 지점 강우자료가 저장되어 있으며, 이를 사용하기 위해서는 다시 티센법(Thiessen Method), 유역평균법 등을 이용하여 지점강우에서 MAP로 환산 후 활용해야한다. 또한 이러한 선행 작업들은 모형 수행자마다 반복적으로 이루어지는 작업이므로 변환 프로그램에 의해 자동으로 계산하여 DB 등에 저장하고 사용한다면 수문자료 분석에 소모되는 시간과 비용을 절감할 수 있을 것이다. 현재 데이터베이스 내부에는 이러한 자료변환 알고리즘이 포함되어 있지 않으며 원시자료인 지점 강우자료가 데이터베이스에 저장되어 활용하고 있다. 따라서 수자원 전문가들에게 분석하고자 하는 유역별 모형별로 입력자료의 형태가 변환되어 자료를 실시간으로 제공하고, 또한 전산전문가가 아닌 수자원 전문가에 의해 관리 될 수 있는 데이터베이스 관리프로그램이 필요하다. 이러한 데이터베이스 관리프로그램의 역할가운데 주요사항으로 수문 자료를 활용한 수자원 관련 프로그램에 해당 실무 차원에서 작성, 검토, 사용을 위한 수자원 공사의 Raw Data 가공이 사용자의 요구에 따라 이루어져야 한다. 사용자의 요구에 따라 가공된 데이터는 다시 데이터베이스에 저장되어 다른 모형에서 해당 자료를 필요로 하게 될 경우 사용자들은 데이터를 손쉽게 받아 사용할 수 있다. 저장된 자료들은 검$\cdot$보정 기능을 포함하여 신뢰성을 확보하고 유출모형의 입력자료를 동일한 수준으로 유지하게 된다. 특히 IRWMS(Integrated Real-time Water Manage System)를 물관리 센터에서 실질적으로 운영하기 위해서는 신뢰성 있는 수문자료의 확보가 반드시 필요하다. 초기 입력자료의 신뢰성에 따라 시스템 전체에 미치는 영향이 상당히 크기 때문이다. 따라서 이러한 수문자료 연산 프로그램(JydroDB Solution)은 수문자료의 신뢰도를 분석할 수 있을뿐만 아니라 IRWMS 내부의 여러 모형과 연동이 가능하도록 개발하였고 수자원 전문가에 의해 테이터베이스관리가 손쉽게 이루어지도록 구성하였다.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.3
• /
• pp.364-372
• /
• 2000

Subcategorization, defining dependency relation between predicates and their complements, is an important source of knowledge for resolving syntactic and semantic ambiguities arising in analyzing sentences. This paper describes a Korean subcategorization dictionary, particularly annotated with semantic roles of complements coupled with thesaural semantic hierarchy as well as syntactic dependencies. For annotating roles, we defined 25 semantic roles associated with surface case markers that can be used to derive semantic structures directly from syntactic ones. In addition, we used more than 120,000 entries of thesaurus to specify concept markers of noun complements, and also used 47 and 17 predicate patterns for verbs and adjectives, respectively, to express dependency relation between predicates and their complements. Using a full-fledged thesaurus for specifying concept markers makes it possible to build an effective selectional restriction mechanism coupled with the subcategorization dictionary, and using the standard predicate patterns for specifying dependency relations makes it possible to avoid inconsistency in the results and to reduce the costs for constructing the dictionary. On the bases of these, we built a Korean subcategorization dictionary for frequently used 13,000 predicates found in corpora with the aid of a tool specially designed to support this task. An experimental result shows that this dictionary can provide 72.7% of predicates in corpora with appropriate subcategorization information.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.3
• /
• pp.353-362
• /
• 2015

Platform screen door (PSD) installed at underground subway station has reduced the safety accident, but it may cause poor air ventilation condition due to the isolated exhaust duct in the subway tunnel area. In this study, the additional ventilation system was suggested, which can be installed at a void space (i.e., storage room under stairs) of platform in order to improve efficiency of air ventilation rate. Exhausted air from platform was directed to underneath of platform and joined with existing ventilation duct of train exhaust system (TES). One subway station in Seoul city was selected to predict the effectiveness of the suggested lower exhaust system by using the computational fluid dynamics (CFD) analysis. The predicted mean age of air was decreased by 16.5% which proves the improvement of air ventilation efficiency when the suggested lower exhaust system was applied.

• Journal of Korea Water Resources Association
• /
• v.42 no.1
• /
• pp.21-31
• /
• 2009

The characteristics, intensity and direction of groundwater.surface water interactions are controlled by groundwater head gradients, hydraulic conductivity and by the riverbed geometry. As a result of the spatial heterogeneity of these factors and the subsequent variability of the impact of these interaction processes, the water balance is also characterized by highly variable spatial patterns and temporal dynamics. However, spatially detailed studies concerning the spatio-temporal variability of the extent and intensity of surface-groundwater interactions have been limited to the investigation of cross-sections or small stream reaches. Thus, the extensive study on the watershed based interaction between surface water and groundwater is to be analyzed. In this study, the intensity and the spatial extent of interactions along the stream were found by using integrated SWAT-MODFLOW model. This integrated modeling approach was applied to Anyangcheon watershed in Korea. The effluent stream characteristics were found in the watershed, namely, baseflow was annually discharged except heavy rainy periods. The intensity and the spatial extent of surface-groundwater interactions in different sub-watersheds were found on a daily basis. The influential extent of surface-groundwater interaction become larger as the watershed elevations are lower.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.4
• /
• pp.47-55
• /
• 2008

This paper deals with basic theories and some numerical results on structural optimization for geodesic dome. First of all, the space efficiency of geodesic dome is investigated by using the ratio of icosahedron's surface area to the internal volume enclosed by it. The procedure how to create the geodesic dome is also provided in systematic way and implemented and utilized into the design optimization code ISADO-OPT. The mathematical programming technique is introduced to find out the optimum pattern of member size of geodesic dome against a point load. In this study, total weight of structure is considered as the objective function to be minimized and the displacement occurred at loading point and member stresses of geodesic dome are used as the constraint functions. The finite difference method is used to calculate the design sensitivity of objective function with respect to design variables. The SLP, SQP and MFDM available in the optimizer DoT is used to search optimum member size patterns of geodesic dome. It is found to be that the optimum member size pattern can be efficiently obtained by using the proposed design optimization technique and numerical results can be used as benchmark test as a basic reference solution for design optimization of dome structures.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.34-41
• /
• 2011

At present wireless internet access service is available through the 3G network, mobile WiMAX and WiFi anytime and anywhere. In this environment where there are various networks, users should be able to select specific networks depending on different situations. And it is necessary to provide mobility support between homogeneous and between heterogenous networks. Given this situation, the many proposals have been presented to link 3G, which has the largest service area among various networks, with mobile WiMAX(IEEE 802.16e), or with WiFi(IEEE 802.11). But, recently, with the increasing volume of wireless internet use and wireless internet data, due to the advents of net-book, e-book and smart phone, the service area of WiFi and mobile WiMAX has rapidly expanded. Especially, the availability of real-time application such as internet phone has led to the relative shrinking of the proportion of 3G mobile communication network giving conventional voice service, and enlargement of those of wireless internet access networks like WiFi and mobile WiMAX. This paper suggests a handover scheme based on PMIPv6, whitch support mobility between WiFi and mobile WiMAX, and minimizes handover delay. In this scheme, the mobile node has a dual stack structure composed of two interfaces-WiFi and mobile WiMAX. Since WiFi dose not support mobility, it is suggested that the mobile node have the capacity to deal with handover signaling between gateway in case of handover between homogeneous networks. This handover scheme, suggested comparing with current handovers between homogeneous networks, has proved, in its analytic evaluation, to be able to reduce handover, transmission, and signaling overhead.

• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.166-173
• /
• 2005

This study was carried out to evaluate the structural stability in a non-heating greenhouse with a single cover for Citrus cultivation which was built up in Jeju on the basis of the drawing designed by Jejudo Agricultural Research & Extension Services and also to make use of the data for developing a standardized non-heating greenhouse in Jeju. The analysis of a structural stability was conducted by using CFX-5.7 and ANSYS under the design condition of a maximum accumulated snow-depth of 19.1 cm as well as an instantaneous maximum wind velocity of $36.6\;m{\cdot}s^{-1}$ which was set up on the basis of meteorological statistics in Jeju. As a result, the maximum von-Mises stress applied on pipes under the wind velocity of $36.6\;m{\cdot}s^{-1}$ showed a value of $250\;N{\cdot}mm^{-2}$ which was greater than the allowable stress of the pipe with a value of $235.4\;N{\cdot}mm^{-2}$ (=$2,400\;kg{\cdot}cm^{-2}$) and also $53.8\;N{\cdot}mm^{-2}$ under the snow-depth of 19.1 cm, respectively. This result suggested that the greenhouse be unstable under the design condition of an instantaneous wind velocity of $36.6\;m{\cdot}s^{-1}$ so that it was necessary for the greenhouse to be reinforced to secure the structural stability.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.4
• /
• pp.363-368
• /
• 2008

Mobile devices become more complex and harder to manage due to the advance of technologies. In this paper, we designed and implemented the DM Agent based on OMA(Open Mobile Alliance) DM(Device Management) which is a standard for mobile device management. The proposed DM Agent basically can manage parameter configuration through the commands ADD, DELETE, REPLACE and GET currently. Each module of the agent was designed and implemented separately for additional functions such as error reporting and software management. So the additional functions can be added by modifying Adaptor part which processes the management commands instead of modifying other modules which analyze or generate management commands. The DM Agent proposed in this paper is implemented based on WIPI(Wireless Internet Platform for Interoperability), therefore portability of the agent can be improved. In addition, this research can give a development example for dissenminating OMA DM as well as verify functional compatibility of WIPI platform. SK WIPI SDK and a Funambol DM test server are used to test operations of the implemented DM Agent.