• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.177-184
• /
• 2011

There are several differences between freeways and general national roads in terms of structures, conditions and limited speeds. Likewise, the characteristics of $CO_2$ emission in these roads differ depending on the road types. For these reasons, it is necessary to compare the two types of roads in terms of $CO_2$ emissions. The study was performed targeting Gyeongbu Expressway and National Highway 1. Firstly, the amount of $CO_2$ emission each car was compared in the whole sections of the both. Secondly, top 10 sections were picked out, and then $CO_2$ emission each section were compared. Lastly, two sections which were with the highest and lowest amount of $CO_2$ emission per car, were compared. As results, it were found that there were less amount of $CO_2$ emission on freeways. because cars are running on uniform velocity at relatively high speed, and that there were more amount of $CO_2$ emission on the national highway. because of frequent intersections and associated congestion. It may be concluded that the amount of $CO_2$ emission at the national highway could be reduced if signal coordination and intersection intervals are improved there.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.17-28
• /
• 2009

There are many limitations in dealing with rapidly changing traffic demand in urban cities. Thus recently, traffic operation and management skills are more emphasized rather than the expansion of traffic facilities. In particular, in the interrupted flow formed by signalized intersections, it is quite important to give optimal signal timing to each intersection with consideration of progression. However, as fixed signal times per direction can affect passing capacity in signalized intersections, the present four-signal phase including a left-turn signal has many limitations, including reduction of directional road capacity when traffic demand is increases dramatically during peak hours. Because of this problem, lots of studies about internal metering techniques for oversaturated signal control skills have progressed but these techniques are not used widely due to the absence of detectors for queue sensing in real-time signal control systems. In this research, a new methodology called the "restrictive left-turn signal control", which is already used at the intersection above Samsung subway station, is suggested in order to reduce control delay of urban arterial roads. The restrictive left-turn signal control allows a driver to make a U-turn and then a right turn instead of turning left in that intersection. With this change, the restrictive left-turn signal control can contribute to increased intersection capacity by reducing the number of signal phases and maximizing the through phase time. However, road structure and traffic conditions at the target intersections should be considered before the adoption of the proposed signal control.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.43-52
• /
• 2005

Signal timing transition has recently been highlighted with Adaptive Traffic Control Systems (ATCS) providing advanced traffic signal operation including real-time grouping of coordinated intersections. Signal timing transition occurs when such signal timings as cycles and offsets are changed at coordinated intersections. Setting a proper length of signal timing transition has become in interest for real-time coordination. This paper presents a study verifying the effects of different lengths of signal timing transition. Four different transition lengths were tested and compared in simulation environment. They include a single, double, treble, quadruple cycle length transitions. The number of cycles represents the ones used (interpolation) for transition. Signal timings were controlled to be adjusted uniformly and discretely during a transition period. Transition times considered in the test are within ranges of ${\pm}20$ percents of cycle lengths. It was found from the study that a single cycle transition performs better than or at least equal to the ones from the other with fifteen different operational conditions, which are developed based on a hypothetical arterial. It was suggested that a single cycle length transition be beneficial when amount of transition is within ${\pm}20$ percents of cycle lengths.

• Journal of Korean Society of Transportation
• /
• v.33 no.1
• /
• pp.70-80
• /
• 2015

In recent years, tram has been the focus of a new mode of public transportation that can solve traffic jams and decrease public transit usage and environmental problem. This research is in the works to develop a tram signal controller and signal control strategies, and aim to resolve the problem of what could happen if a tram system was installed in general road. We developed the hierarchical signal control strategies to obtain a minimum tram bandwidth and to minimize vehicle delay, in order to perform a priority control to include passive and active signal priority control strategies. The strategies was produced for S/W and H/W, it is based in standard traffic signal controller. We conducted a micro simulation test to evaluate the hierarchical signal control strategies, which showed that the developed optimization model is effective to prevent a tram's stop in intersection, to reduce a tram's travel time and vehicle's delay.

• Journal of Korean Society of Transportation
• /
• v.18 no.4
• /
• pp.7-18
• /
• 2000

KS-SIGNAL, a traffic signal optimization model for coordinated arterials, is an optimization model using the mixed integer linear Programming that minimizes total delay on arterials by optimizing left-turn Phase sequences. However, the Previous version of KS-SIGNAL had a difficulty in reducing computation speed because the related variables and constraints multiply rapidly in accordance with the increase of intersections. This study is designed to propose a new model, improving optimizing computation speed in KS-SIGMAl, and evaluate it. This Paper Puts forth three kinds of methodological approaches as to achieve the above goals. At the first step to reduce run-time in the proposed model objective function and a few constraints are Partially modified, which replaces variable in related to queue clearance time with constant, by using thru-movements at upstream intersection and the length of red time at downstream intersection. The result shows that the run-time can be reduced up to 70% at this step. The second step to load the library in LINDO for Windows, in order to solve mixed integer linear programming. The result suggests that run-time can be reduced obviously up to 99% of the first step result. The third step is to add constraints in related to left-turn Phase sequences. The proposed methodological approach, not optimizing all kinds of left-turn sequences, is more reasonable than that of previous model , only in the view of reducing run-tim. In conclusion, run-time could be reduced up to 30% compared with the second results. This Proposed model was tested by several optimization scenarios. The results in this study reveals that signal timing plan in KS-SIGNAL is closer to PASSER-II (bandwidth maximizing model) rather than to TRANSYT-7F(delay minimizing model).

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.1
• /
• pp.1-12
• /
• 2012

Even though the semi-actuated signal control system based on image detectors has been spreading in Korea, any appropriate methods to evaluate the effectiveness and performance has not been established yet. Therefore, this research effort is aiming at developing a systematic method for evaluating the effectiveness and performance of the semi-actuated signal control system based on image detectors. To this end, this research firstly established measures of effectiveness(MOEs) and associated information to be surveyed from fields. Secondly, this research provided a procedure and methodology to evaluate any improvements due to the introduction of a semi-actuated signal control system based on image detectors. The developed methodology was examined at a case study site located in the city of Paju. As a result of the evaluation, the MOEs including traffic throughput, travel speeds, split usage rate, progression rate, etc. showed positive improvements though individual signalized intersections as well as coordinated corridors.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.27-34
• /
• 2009

The operational effect of traffic signal control improvement was evaluated using the Two-Fluid Model. The parameters engaged in the Two-Fluid Model becomes food indicators to measure the quality of traffic flow due to the improvement of traffic signal operation. A series of experiment were conduced for the 31 signalized intersections in Uijeongbu City. To estimate the parameters in the Two-Fluid Model the trajectory informations of individual vehicles were collected using the CORSIM and Run Time Extension. The test results showed 35 percent decrease of average minimum trip time per unit distance. One of the parameters in the Two-Fluid Model is a measure of the resistance of the network to the degraded operation with the increased demand. The test result showed 28 percent decrease of this parameter. In spite of the simulation results of the arterial flow, it was concluded that the Two-Fluid Model is useful tool to evaluate the improvement of the traffic signal control system from the macroscopic aspect.