• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.5
• /
• pp.695-699
• /
• 2012

The objective of this study was to set the optimal extraction condition of flavonoids from onion peels as a by-product generated from the onion industry without suitable processing. Four independent variables, affecting extraction conditions, which are solvent concentration ($X_1$), extraction temperature ($X_2$), pH of the solvent ($X_3$), and solvent ratio to onion peel ($X_4$) were optimized using response surface methodology (RSM). A model equation obtained from RSM is 0.772 of R-square and 0.278 of lack of fit (p>0.05) for the optimal extraction conditions. From the ridge analysis, the conditions flavoring the highest extraction were solvent concentration (v/v) of 70%, extraction temperature of $40^{\circ}C$, extraction solvent pH of 5.3, and a solvent ratio to onion peel ratio of 1:63 (w/v). The flavonoid content obtained under optimal conditions showed 302.63 mg/g, which is 1.12 times higher than the prediction value.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.7 no.3
• /
• pp.157-170
• /
• 2002

To examine the structure and distribution of the Keum River plume produced by continuous river discharge we carried out three-dimensional numerical model experiments with or without Coriolis force and tide. When Coriolis force is included but tide is not the model plume forms the clockwise circulation north of southern channel in the developing stage. As the plume expansion progresses the center of circulation moves to the southwest, with fuming the discharging axis of low-salinity water to the southwest from the mouth of southern channel. These results are explained mainly in terms of barotropic geostrophy by surface slope maintained with accumulated low-salinity(buoyant) water in front of the estuary mouth due to of offshore strong salinity front. When the M$_2$ tide is included the model plume extends farther to the northwest, forming large tongue-like salinity distribution. The tidally averaged surface flows of the offshore plume are mainly in geostrophic balance. These changes in plume distribution are explained in terms of low-salinity water advection by tidal excursion and active tidal mixing; the former supplies low salinity water to the north off the estuary mouth and the later increases mean sea level along the plume and surface salinity in northern shallow coastal area. The main features of observed Keum River plume(Lee et al., 1999; Choi et al., 1999), which showed the northwestward deflection of the plume axis and northward deepening of the plume thickness from the estuary mouth region, are well reproduced by the model in which tide is included.

• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.413-421
• /
• 1987

The objective of this study was to evaluate the possibility of sex preselection by gradients methods using bovine serum albumin in rabbits. Artificial insemination with separated sperm was performed, after highly motile sperm were separated by different methods using 6%, 10% and 20% bovine serum albumin. Various characteristics of separated sperm, and the conception rate and secondary sex ratio at artificial insemination with sperm separated by different methods were compared. The results obtained were as follows. 1. The conception rate of sperm separated by bovine serum albumin gradients was higher than th at of control sperm. But secondary sex ratio was not altered by this methods. 2. The sperm separated by bovine serum albumin gradients showed significantly high value in motility, percent of normal sperm and progressive motility as compared with control sperm and revealed the highest sperm recovery when separated with 6% bovine serum albumin. 3. The sperm motility, percent of normal sperm and progressive motility of the highly motile sperm frozen after being separated from raw semen with bovine serum albumin, showed significantly high value than those of control sperm.

• KSBB Journal
• /
• v.17 no.2
• /
• pp.195-202
• /
• 2002

The production conditions of cellulolytic enzymes by a fungus, strain FJ1, were optimized using response surface analysis. The culture factors which largely affected the production of enzymes such as cultivation time, carbon source concentration, nitrogen source concentration, and composition ratio of carbon sources were employed. Optimizedconditions of the factors above corresponding to each cellulolytic enzyme production were as fellowing: CMCase production was obtained in the conditions of cultivation time of 5.4 days, carbon source concentration of 3.5%, nitrogen source concentration of 0.6%, and composition ratio of carbon sources of 52:48 (avicel:CMC), xylanase appeared in the conditions of 5.3 days, 3.5%, 0.8%, and 54:46, respectively, and $\beta$-glucosidase were 7.0 days, 5.0%, 1.0%, and 83:17, respectively, and avicelase were 6.5 days, 4.0%, 0.9%, and 64:36, respectively. The activities of CMCase, xylanase, p-glucosidase, and avicelase predicted by the response surface methodology were 33.5, 52.6, 2.88, and 1.84 U/mL, respectively, and $\beta$-glucosidase activity was enhanced up to 74% when compared to that obtained in the experimental conditions.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.5
• /
• pp.294-305
• /
• 1989

Basedon statistical data of pomfret (Pampus spp.) catches by the stow net during $1970\~1985$, the distribution and migration of pomfrets and fishing conditions were investigated in relation to oceanographic conditions, in the East China Sea and the Yellow Sea. The main fishing grounds of Pomfrets were formed around the Great Yangtze Sand Bank which locates between the Cheju Island and the mouth of the Yangtze River. Its area occupied only 11 percent of all fishing grounds, and about 70 percent of total catch was found there. The coefficient of variation(CV) in catch was below 0.01 in the whole fishing grounds and that of tile main fishing grounds (14 fishing areas) was $0.001\~0.003$. This area was indicated markedly by the inflow of Yellow Sea Warm Current from spring to autumn, and this mixing area which formed the oceanic front among the China Continental Shelf Water, the Yellow Sea Bottom Cold Water and the Tsushima Warm Current. The pomfrets migrates to south-north according to the expansion and contraction of the Tsushima Warm Current including the Yellow Sea Warm Current and the Yellow Sea Bottom Cold Water. Therefore, it migrates to north of the Yellow Sea in summer and to southern part of the East China Sea in winter. The most frequent range of the water type for high catch was $10\~12^{\circ}C$ in temperature and $32.4\~33.4\%_{circ}$ in salinity. The ranges was occupied more than 70 percent of total catch on fishing season. The frequency range of the water type was not different between the abundant fishing periods and the poor fishing periods in terms of the maximum catches.

• 한국해양학회지
• /
• v.30 no.4
• /
• pp.237-249
• /
• 1995

To understand the cross-sectional structures of temperature, salinity and current across the Korea Strait, field measurements were carried out for the period of May 2 to 20, 1994. Using the R/V Tam Yang, detailed CTD profiles and ADCP records were obtained and used to examine the mean and variability field on two time scales (15 days and 25 hours). A sharp coastal front in the middle of the Korea Strait exists across which two different water masses, i.e., warm and saline water in the eastern side and cold and less saline water in the western side are neighboring. We observed highly variable field of T and S apparently caused by the westward movement of warm and saline water mass. Short-term fluctuations of T and S in the middle layer are remarkable and their importance was analysed as the first Eigen mode accounting for more than 50% of total variances. The currents in th Korea Strait are strongly influenced by tidal currents with spring and neap variation whose maximum speed ranges 80-90 and 60-70 cm/s respectively near the central portion of the channel. Strong southward tidal current could even mask the Tsushima Current completely. Results of harmonic analysis show that the magnitudes of semidiurnal, diurnal and mean components of currents are comparable to each other at spring and neap tide conditions. The volume transport across the western channel of the Korea Strait were estimated to be 2.1 Sv at neap tide condition and 3.4 Sv at spring tide condition.

• The Journal of Engineering Geology
• /
• v.25 no.3
• /
• pp.377-385
• /
• 2015

We constructed a model test apparatus to evaluate the dependence of the saturation velocity (V_s) in soils on rainfall intensity (I_R). The apparatus comprises a soil box, a rainfall simulator, and measuring sensors. The model grounds (60 cm × 50 cm × 15 cm) were formed by Joomunjin standard sand with a relative density of 75%. The rainfall simulator can control the rainfall intensity to reenact the actual rainfall in a soil box. Time Domain Reflectometer (TDR) sensors and tensiometers were installed in the soils to measure changes in the volumetric water content and matric suction due to rainfall infiltration. During the tests, the soil saturation was determined by raising the groundwater table, which was formed at the bottom of the soil box. [Please check that the correct meaning has been maintained.] The wetting front did not form at the ground surface during rainfall because the soil particles were uniform and the coefficient of permeability was relatively high. Our results show that the suction stress of the soils decreased with increasing volumetric water content, and this effect was most pronounced for volumetric water contents of 20%-30%. Based on a regression analysis of the relationship between rainfall intensity and the average saturation velocity, we suggest the following equation for estimating the saturation velocity in soils: V_savg (cm/sec) = 0.068I_R (mm/hr).

• Geophysics and Geophysical Exploration
• /
• v.5 no.1
• /
• pp.56-63
• /
• 2002

Tracing the history of study, problems of seawater intrusion are commonly investigated with electrical techniques because seawater saturated zone is indicative of the low resistivity anomaly. There we, however, silt and mud layers in the western and southern coastal areas of Korea, so we may make a mistake in case we determine seawater intrusion only with resistivity survey. Hence, reference IP survey was carried out in Kimje, Jeollabuk-Do and Youngkwang, Jeollanam-Do in order to decide whether or not the area is under the influence of seawater intrusion. With the use of a electric field cable to minimize EM coupling, we obtained more accurate results by appling reference If technique measuring simultaneously wavelet of current as well as potential. With the aid of reference IP technique, it is possible that we can exactly evaluate seawater intrusion by discriminating seawater saturated area (no IP effect) from very highly conductive layer composed of clay mineral (high IP effect).

• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.449-456
• /
• 2002

Recently, the application of high strength and high performance concrete has been gradually increased as an important construction material for high rise and huge scaled construction. However, high performance concrete has undesirable characteristics of spalling subjected to high temperature due to its dense microstructure content. A spalling by fire brings surface failure and falling off concrete member. It is considered that spalling by fire should be taken into account for the safety of the concrete structure under fire. Therefore, in this paper, tests are carried out using high performance concrete containing polypropylene(PP) fiber in order to improve the fire resistance performance. PP fiber contents and member sizes are varied. According to experimental results, as for the influence of PP fiber contents, all the test specimens without PP fiber show entire failure in W/C of 35％, while they show nearly sound shape except some kinds of surface fracture in W/C of 55％. When PP fiber is contained more than 0.07％, favorable prevention effects of spatting by fire are obtained. As for the effects of test specimens size, it tends to increase the possibilities of spatting by fire as test specimens become larger. And spatting by fire at the edge of test specimens occurs more frequently than at the surface of test specimens. Residual compressive and tensile strength shows 45∼65 ％ of its original strength at W/C of 35％, and 30∼40％ at W/C of 55 ％.

• Elastomers and Composites
• /
• v.39 no.2
• /
• pp.131-141
• /
• 2004

The recycling of waste XLPE(crosslinked polyethylene), which is a major source of scraps from high voltage power transmission cables, has been discussed. The waste XLPE scraps were ground into fine powder with various sizes from less than $100{\mu}m$ up to about $1000{\mu}m$ using two types of tailor-made pulverizers. The compounds were prepared in a modular intermeshing co-rotating twin screw extruder at various conditions such as different compositions, types and powder sizes of waste XLPE, screw configurations and various polymer matrices (LDPE, HDPE, PP, PS). The mechanical and rheological properties and the fracture surface or the compounds were investigated. It was found that an improved impact strength was obtained from the compound with white XLPE powder pulverized from the scraps without outer/inner semi-conductive layers. Generally, the impact strength increases with the content of XLPE but decreases with the size of XLPE. Especially for LDPE, the extrusion was possible up to 80 wt% loading of XLPE. Also, the impact strength increases with the number of kneading disc blocks in the given screw configurations. The melt viscosity of the compounds increases with increasing XLPE loading. However, the higher shear thinning behavior of the compounds at common shear rates implies proper processibility of the compounds. In addition, the impact strength for other polymer matrices used increases with XLPE and it is noticeable that the impact strength of PS/XLPE (80/20 wt%) compound was improved twice that of pure PS.