• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.5-5
• /
• 2015

현재 우리나라에서 지상관측장비인 AWS(Automatic Weather System)와 ASOS(Automated Synoptic Observing System)기구가 한반도내 668개 지점에서 운영되고 있다. 이러한 장비는 지상관측장비로 하나의 지점에서 측정된 기상변량들이 특정 영역의 대푯값으로 사용되어지고 있다. 기존의 다양한 지점 단위의 수문 모형에서는 지상관측소를 통한 관측값을 적용하기에 어려움 없이 적절한 결과를 도출할 수 있었다. 컴퓨터의 발달로 인하여 복잡한 물리적 현상을 공간적으로 분석할 수 있는 모형의 구동이 가능해짐에 따라서 수문 분야에서도 다양한 분포형 해석 모형이 활발하게 개발 및 적용되고 있다. 지점 관측 자료는 공간적인 연속성을 반영하지 못하는 한계로 인하여 지점 관측자료를 이용한 공간자료의 생성 기법들이 사용되어지고 있지만 자연계에서 나타나는 정확한 공간적 현상을 재현해주지 못하는 문제점이 존재한다. 이러한 지점 관측의 한계를 해결하기 위하여 공간적인 관측이 가능한 레이더와 위성관측과 같은 원격 관측 장비들이 개발되어 공간적으로 연속성을 갖는 기상변량의 취득이 가능하여졌다. TRMM 강우자료는 지구 전체를 0.25도 약 25km 공간해상도를 갖으며 3시간 간격으로 제공되고 있다. 유역단위의 수문모형에 적용하기에 TRMM 강수자료의 공간해상도는 너무 커서 직접적인 적용에 어려움이 있다. 이러한 점에서 TRMM 자료의 상세화 기법을 통하여 수문모형에 적용이 가능한 1km 이하의 고해상도 자료를 생산하는 연구들이 진행되고 있다. 이러한 상세화 방법은 최종적으로 도출하고자 하는 공간해상도를 갖는 대체 변량(지표면 온도, 고도, 식생, 해수면 기압, 상대 습도, 대기온도, 풍향 등)을 이용하여 회귀분석의 형태로 분석이 이루어지고 있다. 그러나 대체 변량을 통해 도출된 상세화된 TRMM 강우는 간접적인 추정으로 인하여 정확한 결과의 도출에는 한계가 있을 것으로 판단된다. 이러한 점에서 본 연구에서는 한반도내 지상 관측값을 공간적 자료로 변환하여 주는데 효과적으로 평가받는 PRISM 모형에 적용하여 기존 SVM 모형을 통한 TRMM 상세화 결과가 갖는 정확성을 평가해 보고 지점 관측자료의 보간 기법의 평가에 TRMM 자료를 활용하는 방안에 대해 평가해 보고자 한다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.3
• /
• pp.221-243
• /
• 2023

The use of roadheaders has been increasing to mitigate the problems of noise and vibration during tunneling operations in urban area. Since lack of experience of roadheader for hard rock, the selection of appropriate machines and the evaluation of cutting rates have been challenging. Currently, empirical models developed overseas are commonly used to evaluate cutting rates, but their effectiveness has not been verified for domestic rocks. In this paper, a comprehensive literature review was conducted to assess the rock cutting force, cutterhead capacity, and cutting rate to select the appropriate machine and evaluate its performance. The cutterhead capacity was reviewed based on the literature results for the site. Furthermore, a new empirical model and simplified method for predicting cutting rates were proposed through data analysis in relation to operation time and rock strength, and compared with those of the conventional model from the manufacturer. The results show good agreement for high strength range upper 80 MPa of uniaxial compressive strength.

• Explosives and Blasting
• /
• v.38 no.4
• /
• pp.16-25
• /
• 2020

Multi-setting smart-investigation of the ground and large uncharged hole boring (MSP) method to reduce the blast-induced vibration in a tunnel excavation is carried out over 50m of long-distance boring in a horizontal direction and thus has been accompanied by deviations in boring alignment because of the heavy and one-directional rotation of the rod. Therefore, the deviation has been adjusted through the boring machine's variable setting rely on the previous construction records and expert's experience. However, the geological characteristics, machine conditions, and inexperienced workers have caused significant deviation from the target alignment. The excessive deviation from the boring target may cause a delay in the construction schedule and economic losses. A deep learning-based prediction model has been developed to discover an ideal initial setting of the MSP machine. Dropout, early stopping, pre-training techniques have been employed to prevent overfitting in the training phase and, significantly improved the prediction results. These results showed the high possibility of developing the model to suggest the boring machine's optimum initial setting. We expect that optimized setting guidelines can be further developed through the continuous addition of the data and the additional consideration of the other factors.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.3
• /
• pp.99-105
• /
• 2011

The Korean Government is promoting Korean Land Spatialization Program(KLSP) to commercialize and practice of the technology from 2006 to 2012. It is preparing for field test to make research achievements verified in Sejong City by selecting a test-bed area. It creates the conditions to be satisfied standards that can be recognized at internal and external. This paper proposes to design a test bed considering site conditions and various requirements for performance verification of Surveying Equipments in KLSP.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.856-859
• /
• 2006

Patient's position who muscle ache curer for hospital undergoes person entrance and treatment that take advantage of biological, physical force of low frequency and it is equipment that treat body muscle ache, but use equipment when use patient into compensation in hospital specially, that consider everybody is important first of all. This research question investigation with market survey of old product enforce because preference degree reflected officer a result and apply opinion tuned with product development connection engineers on DESIGN direction via typical product design development process close. This curer development research analyzed data involved directly taking advantage of FGI techniques with literature investigation collection. Investigation examined laying stress on muscle ache curer for hospital and a nurse than a doctor answered on question and purchase selection criterion or price portion to user focus. Direct market survey research that see item indicated by competition four provision shortcomings consequently in NEW MODEL development hereafter supplement and expectation. by contributing greatly in M/S security strategy hereafter because design development consisted for side that improve.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.3
• /
• pp.53-59
• /
• 2009

Low pressure mercury lamp type UV equipments have been widely used for cleaning and modification of PCB surfaces. To enhance the productivity of the process, we newly developed remote DBD type atmospheric pressure plasma equipment. The productivity of both equipments could be compared by measuring surface contact angle for various transferring speed. By the result of the measurement, we could verify that the productivity of the atmospheric pressure plasma be superior to the productivity of the UV equipment. XPS experiments confirmed that the surface effect of the UV and atmospheric pressure plasma processing are similar for each other. Organic contamination level was reduced after the processing and some surface elements were oxidized for both cases. Finally, the atmospheric pressure plasma equipment was adapted to flip chip BGA's flux printing process and it was concluded that the printing uniformity be enhanced by the atmospheric pressure plasma surface treatment.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.605-611
• /
• 2020

The purpose of this study is to analyze the perception and demand of industrial sites necessary for the development of ICT-based products for young child, to seek effective support plans for ICT-based young child product developers that help with smart child rearing in the era of low birthrate. To this end, first, it was found that various and active promotions of specialized organizations or centers that have jointly utilized equipment are necessary. Second, it was found that many companies were willing to use equipment for the development of ICT-based young child's products. Third, the demand for corporate support was to provide information, equipment utilization, technical guidance and biometric information. Based on these results, it was proposed to expand related infrastructure that can efficiently support the development of ICT-based products for young child.

• Journal of The Korean Association For Science Education
• /
• v.28 no.8
• /
• pp.880-889
• /
• 2008

Research-based professional development is essential for in-service and pre-service science teachers across the nation. The purpose of this study was to examine in-service science teachers' and pre-service teachers' perception of the training program for professional development using advanced science laboratory equipment and experiments. Science teachers (N= 43) in science high schools and pre-service science teachers (N=189) were selected as research subjects. As a result of this study, in-service teachers and pre-service teachers recognized that they lacked understanding and experience in advanced science laboratory equipment, although they perceived the importance of its use. They wanted to attend training programs during vacation if they would have the opportunity. Both groups felt that they needed to improve their ability to operate the advanced science lab equipment, preferring to practice these instruments in the training programs. In-service teachers preferred the development of teaching and learning programs for use of the advanced science laboratory equipment. However, pre-service teachers preferred using the advanced science laboratory equipment. The study gives implications for teachers' professional development.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.10
• /
• pp.1010-1016
• /
• 2009

In this paper, we have described an aircraft captive flight test for the development test of weapon systems. We have conducted a captive flight test for the development of core onboard parts and sensors of airborne weapons and guided missiles. We have used KTX-1/XKO-1 aircraft as a platform for the captive flight test. In order to perform a captive flight test, we have made a captive test pod as a shape of external fuel tank in the XKO-1 and have modified XKO-1 aircraft for a system interface. We have taken a development test about all kinds of seekers, navigation & guidance systems, and core part of guided missile through the aircraft captive flight test.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.6
• /
• pp.1040-1047
• /
• 2015

This study is investigated for M2M Communication Network Standard based on 3GPP. The environment of M2M communication, we can predict the new mobile service that gathering, handling, controlling, transferring of the data for Intelligence, so that we can consider new direction for a lot of subject of study development issue. This study is shown three types of M2M network structure and four types of use cases on 3GPP International Standard. In Addition, we can introduce the future M2M communication network model, it can be propagate the industry and academic cooperation with 3GPP standards. The suggestion develops multiple applications and multiple devices for industry and academic. With the deployment of network provider, this environment support our current communication market that the standard devices of M2M network and service requirement. We are suggest this study for grasp the initial market with the intellectual property right (IPR) based on International Standards. In the future, we wish the success that grap the initial market or initial academic study with helpful issue.