• Annual Conference of KIPS
• /
• 2006.05a
• /
• pp.1311-1314
• /
• 2006

원자력 시설 및 연구용 원자로 해체 시 해체 공정의 효율성을 증진시키기 위해 컴퓨터 그래픽스를 이용한 해체 공정의 최적화 연구가 수행되었다. 애니메이션 설계를 위해 해체 시설 및 구조물과 해체 장비의 모델링이 완료되었으며, 방사능에 오염된 대상물의 방사능 분포도를 위치별, 준위별로 확인할 수 있도록 3 차원으로 나타내었다. 해체 일정과 해체 폐기물량 그리고 해체 비용을 모사하기 위해 각 정보들에 대한 평가식과 가중치 값을 도출하였다. 연구로 1 호기 Thermal column 을 대상으로 애니메이션을 통한 해체 공정절차 시각화와 단위 해체 공정 시나리오를 수행한 결과 애니메이션의 경우 해체 현장과 동일하게 모델링 되어 현장 작업자들이 해체 공정 절차를 쉽게 이해할 수 있다는 것을 확인하였으며, 시나리오 별 해체 소요시간과 폐기물량 그리고 해체 비용의 경우 정상적으로 모사가 수행됨으로써 단위 해체 공정에 대한 최적의 시나리오를 평가 할 수 있는 기초 연구의 틀을 마련하였다. 본 시스템은 해체 관리자, 해체 시스템 분석가, 해체 현장 감독과 해체 작업자들의 중요한 협업도구로 활용될 것으로 사료된다.

• Nuclear Engineering and Technology
• /
• v.23 no.3
• /
• pp.328-339
• /
• 1991

A multi-purpose research reactor called KMRR has been developed by Korea Atomic Energy Research Institute(KAERI) to generate a maximum thermal output of 30 MW. As a part of thermal hydraulics study, pressure drop characteristics of the longitudinally finned fuel rod bundles were experimentally investigated in a recirculating water test loop. The present study is focused on the investigation of fin effects on pressure drop and the development of pressure drop correlation for the finned rod bundles in a wide range of flow conditions. Friction factor correlations for each design of the finned rod bundles are developed. The value of friction factor for the finned rod bundles was higher than the analytical solution (64/Re) of laminar circular channel new but became lower than the Blasius equation as Reynolds number was increased.

• Korean Journal of Optics and Photonics
• /
• v.23 no.5
• /
• pp.203-210
• /
• 2012

Sagnac interferometer gyroscopes can be divided into three large generations using starting points of time or highlights of their research. As the first generational Sagnac interferometer, the ring laser gyroscopes have been studied since the 1960s by laser invention, and as the second generational Sagnac interferometer, the fiber optic gyroscopes have been studied since the 1970s by invention of optical fiber for communication. In the latter half of the 1990s, after having confirmed the wave theory of the atom, studies of atomic interferometers were started for a next generation gyroscope application. This paper discusses the operation principles, application, and future prospects of these three generations of Sagnac gyroscopes.

• Membrane Journal
• /
• v.24 no.5
• /
• pp.341-349
• /
• 2014

Molecular dynamics (MD) computer simulation is a very useful tool to calculate the trajectory and velocity of particles (generally, atoms), and thus to analyze the various structures and kinetic properties of atoms and molecules. For gas separation membranes, MD has been widely used for structure analysis of polymers such as free volume analysis and conformation search, and for the study of gas transport behavior such as permeability and diffusivity. In this paper, general methodology how to apply MD on gas separation membranes will be described and various related researches will be introduced.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.707-719
• /
• 2003

The D&D work requires worker's safety and high reliability of operation because it has been processing in high radioactive environment. Therefore, it is necessary to select the dismantling items and applicable dismantling technologies and analyze the scenarios for selected items. In this paper, the main dismantling items were selected by the consideration of several factors, their 3D CAD models were constructed as well. The applicable dismantling technologies for each dismantling items were selected and their dismantling scenarios were setup. Finally the 3D graphic simulations for the shielding concrete, the RSR, and the core are performed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.4
• /
• pp.129-134
• /
• 2004

In this study, we investigated the effect of a nitrogen atom on the amorphization of V-Fe alloy through solid-gas reaction during mechanical alloying (MA). MA by planetary ball mill of $V_{70}Fe_{30}$ elemental powders was carried out under the nitrogen gas atmosphere. Amorphization has been observed after 160 hours of ball milling in this case. The DSC spectrum for the mechanically alloyed ($V_{70}Fe$_{30}$)_{0.89}N_{0.11}$ powders exhibits a sharp exothermic peak due to crystallization at about $600^{\circ}C$. Structural transformation from the bcc crystalline to amorphous states was also observed through X-ray and neutron diffractions. We take a full advantage of a negligibly small scattering length of the V atom in the neutron diffraction measurement. During amorphization process the octahedral unit, which is typical of a polyhedron formed in any crystal structures, was preferentially destroyed and transformed into the tetrahedral unit. Futhermore, neutron diffraction measurements revealed that a nitrogen atom is selectively situated at a center of the polyhedron formed by V atoms.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1059-1065
• /
• 2010

An analysis was conducted to predict the hydraulic performance of a reactor coolant pump (RCP) of SMART at the off-design as well as design points. In order to reduce the analysis time efficiently, a single passage containing an impeller and a diffuser was considered as the computational domain. A stage scheme was used to perform a circumferential averaging of the flux on the impeller-diffuser interface. The pressure difference between the inlet and outlet of the pump was determined and was used to compute the head, efficiency, and break horse power (BHP) of a scaled-down model under conditions of steady-state incompressible flow. The predicted curves of the hydraulic performance of an RCP were similar to the typical characteristic curves of a conventional mixed-flow pump. The complex internal fluid flow of a pump, including the internal recirculation loss due to reverse flow, was observed at a low flow rate.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.4
• /
• pp.289-300
• /
• 2011

Atomistic origins of carbon solubility into silicates are essential to understand the effect of carbon on the properties of silicates and evolution of the Earth system through igneous and volcanic processes. Here, we investigate the atomic structure and NMR properties of dissolved carbon in enstatite using Raman spectroscopy and quantum chemical calculations. Raman spectrum for enstatite synthesized with 2.4. wt% of amorphous carbon at 1.5 GPa and $1,400^{\circ}C$ shows vibrational modes of enstatite, but does not show any vibrational modes of $CO_2$ or ${CO_3}^{2-}$. The result indicates low solubility of carbon into enstatite at a given pressure and temperature conditions. Because $^{13}C$ NMR chemical shift is sensitive to local atomic structure around carbon and we calculated $^{13}C$ NMR chemical shielding tensors for C substituted enstatite cluster as well as molecular $CO_2$ using quantum chemical calculations to give insights into $^{13}C$ NMR chemical shifts of carbon in enstatite. The result shows that $^{13}C$ NMR chemical shift of $CO_2$ is 125 ppm, consistent with previous studies. Calculated $^{13}C$ NMR chemical shift of C is ~254 ppm. The current calculation will alllow us to assign potential $^{13}C$ NMR spectra for the enstatite dissolved with carbon and thus may be useful in exploring the atomic environment of carbon.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.85-96
• /
• 2004

This paper is to study on the decommissioning cost estimation for nuclear facilities of advanced nuclear organizations and countries for deriving the cost factors to be taken considerations into accomplishing decommissioning projects. Of cost categories producing the factors of decommissioning costs, dismantling and waste processing & disposals activities are examined to increase the its costs. Of labor, materials and other costs categories, labor costs are summarized to have overall majorities in the decommissioning cost factors. The main parameters of all factors affecting the decommissioning costs are analyzed as work difficulty, regional labor costs, peripheral cost, disposal cost and final burial costs.

• Nuclear Engineering and Technology
• /
• v.24 no.2
• /
• pp.168-177
• /
• 1992

The importance of the study of two phase flow phenomena has increased for both fuel performance and safety analysis of nuclear power plants. In the analysis of two phase flow system, an accurate prediction of local void fractions is very important. In this study, a vertical rectangular subchannel having 4 electrically heated rods is constructed for the measurement of local void fraction under two phase flow. The measurement has been conducted by electrical conductivity probes and signal processing circuit which are known to be adequate to measuring local void fraction. Also experiments are performed with varying the inlet flow rate to search for radial void fraction profile accordingly to the different flow rate even with the same averaged void fraction. From the result of experiments, the validity of electrical conductivity probe and electrical circuit is confirmed.