• Journal of Korean Association for Spatial Structures
• /
• v.4 no.2 s.12
• /
• pp.73-80
• /
• 2004

In this paper, a study of damage detection for 2-Dimensional Truss Structures using the parametric projection filter theorr is presented. Many researchers are interested in inverse problem and one of solution procedures for inverse problems that are very effective is the approach using the filtering algorithm in conjunction with numerical solution methods. In filtering algorithm, the Kalman filtering algorithm is well known and have been applied to many kind of inverse problems. In this paper, the Parametric projection filtering in conjunction with structural analysis is applied to the identification of damages in 2-D truss structures. The natural frequency and modes of damaged truss model are adopted as the measurement data. The effectiveness of proposed method is verified through the numerical examples.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.8
• /
• pp.35-46
• /
• 2000

In this paper, we propose a subband acoustic echo canceller using the weighted Overlap-add adaptive filter bank to prevent the decrease of convergence speed in full-band US processing, and make it possible to realize the adaptive filter in block-parallel processing, this paper introduces the weighted overlap-add technique for subband echo canceller. Moreover, we propose a new double-talk detector which employs dedicated filter in addition to the energy comparison method simultaneously. The computer simulation results show that the performance of the proposed subband adaptive echo canceller double-talk detection

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.267-276
• /
• 1999

A 2 stage 6-pole bandpass filter (BPF) is designed and implemented by using K-band triple-mode cavity. The BPF has an 100MHz bandwidth at the center frequency of 18.5GHz and the response of the filter is Chebyshev function. The cavity filter uses two orthogonal $TE_{113}$ modes and one $TM_{012}$ mode. To obtain a Chebyshev response, the intercavity coupling between the adjacent cavities is accomplished by H-field component of TE modes parallel to slot plate. In this paper, the size and location of intercavity slot are determined by the detailed coupling equation from H-field of TE resonant modes in circular cavity. The measured results agree well with the theoretical one.

• Journal of the Korean Geographical Society
• /
• v.52 no.1
• /
• pp.15-24
• /
• 2017

Management of non-point sources for water quality control practice is complicating but very important. Sediments mainly from croplands are prioritized in non-point source management due to the sediment attached phosphorous. In this study, flow and sediment yields are modeled in Oenam watershed located in Hwasun, Jeollanam-do, a upstream of Juam Lake. A spatially distributed model and GIS(Geographic Information System) data was used to find out hot spots of sediment yields, to analyze the effectiveness of filter strips, and to visualize the effectiveness. The impacts of filter strips was estimated on the reduction of flow and sediments at 17.2% and 46.4% respectively when the filter strips were installed in the sub-watersheds with the most serious sediment yields.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11C
• /
• pp.1098-1110
• /
• 2003

In this paper, we propose a homomorphic wavelet-based MMSE filter with edge detection to restore images degraded by speckle noise. In the proposed method, a noisy image is first transformed into logarithmic domain. Each pixel in the transformed image is then classified into flat and edge regions by applying DIP operator to the image restored by homomorphic directional MMSE filter. Each pixel in flat region is restored by homomorphic wavelet-based MMSE filter. Each pixel in edge region is restored by the weighted sum of the output of homomorphic wavelet-based MMSE filtering and that of homomorphic directional MMSE filtering. The restored image in spatial domain is finally obtained by applying the exponential function to the restored image in logarithmic domain. Experimental results show that the restored images by the proposed method have ISNR improvement of 3.3-4.0 ㏈ and ${\beta}$, a measurement parameter on edge preservation, improvement of 0.0103-0.0126 and superior subjective image quality over those by conventional methods.

• The Journal of the Korea Contents Association
• /
• v.6 no.4
• /
• pp.1-10
• /
• 2006

In this paper, a broadband RF module is designed and tested for 2.4GHz band applications. The RF module is composed of a low noise amplifier (LNA) with a three stage amplifier, a single ended gate mixer, matching circuits, a hairpin line band pass filter and a Chebyshev low pass filter to convert the radio frequency (RF) into the intermediate frequency (IF). The LNA has a high gain and stability, and the single ended gate mixer has a high conversion gain and wide dynamic range. In the analysis of the broadband RF module, the composite harmonic balance technique is used to analyze the operating characteristics of an RF module circuit. The RF module has a 55.2dB conversion gain with a 1.54dB low noise figure, $-120{\sim}-60dBm$ wide RF power dynamic range, -60dBm low harmonic spectrum and a good isolation factor among the RF, IF, and local oscillator (LO) ports.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.5
• /
• pp.303-313
• /
• 2010

This paper describes an acoustic communication receiver structure, which is designed for QPSK (Quadrature Phase Shift Keying) signal with 25 kHz carrier frequency and 5 kHz symbol rate, and takes samples from received signal at 100 kHz sampling rate. Based on the described receiver structure, optimum design parameters, such as number of taps of FF (Feed-Forward) and FB (Feed-Back) filters and forgetting factor of RLS (Recursive Least-Square) algorithm, of joint equalizer are determined to minimize the BER (Bit Error Rate) performance of the joint equalizer output symbols when the acquisition data in shallow water using implemented acoustic transducers is decimated at a rate of 2:1 and then enforced to the input of receiver. The transmission distances are 1.4 km, 2.9 km, and 4.7 km. Analysis results show that the optimum number of taps of FF and FB filters are different according to the distance between source and destination, but the optimum or near optimum value of forgetting factor is 0.997. Therefore, we can reach a conclusion that the proper receiver structure could change the number of taps of FF and FB filters with the fixed forgetting factor 0.997 according to the transmission distance. Another analysis result is that there are an acceptable performance degradation when the 16-tap-length simple filter is used as a low-pass filter of receiver instead of 161-tap-length matched filter.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2146-2147
• /
• 2011

전기화재의 원인인 아크 신호는 전류 돌입형, 비선형 및 전류 단속형 부하들의 정상상태와 유사한 전류파형을 갖는다. 이러한 부하들에서 아크를 정확하게 검출하기 위해서는 아크 유무를 정확히 판단 할 수 있는 시스템이 필요하며 이러한 시스템에서 아크검출을 정확히 하는 필터가 중요하다. 본 논문에서는 UL1699의 직렬 아크 발생장치로 아크를 발생시키고 시간 및 주파수 영역에서 아크 전류파형을 분석하였다. 분석결과 아크전류파형은 시간영역에서는 영점전류의 처짐 현상(shoulder)이 발생하고 주파수영역에서는 60Hz의 고조파 성분을 제외한 전대역의 주파수에 걸쳐서 스펙트럼이 증가하였다. 본 논문에서 제시된 아크 검출용 필터는 이러한 특징들 중 주파수 영역의 특징을 검출한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.10b
• /
• pp.1279-1282
• /
• 2001

최근 인터넷의 급속한 사용 증가로 인해 전송 링크의 광대역 지원과 멀티미디어 트래픽의 QoS 보장 문제, 향상된 IP 서비스의 제공 문제 해결은 필수적이다. MPLS 기술은 IP의 유연성과 확장성을 제공할 수 있는 패러다임의 하나이다. MPLS 망의 경계에 위치하는 LER 은 링크 계층 뿐만 아니라 IP 계층에서도 패킷을 전달해야 한다. 본 논문에서는 하드웨어 포워딩 엔진을 갖는 MPLS LER에서, 패킷 필터링 기능을 지원하기 위해서 포워딩 엔진을 제어하기 위한 기법에 대해서 기술한다. 이러한 패킷 필터링 기능은 MPLS LER에 firewall 기능을 제공하는데 응용될 수 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.4
• /
• pp.585-590
• /
• 1993

A wide passband filter consisting of 3-stage ssymmetrical coupler can be realized, where the admittance inverter parameters in equivalent circuit of asymmetrical coupled microstrip lines are given as a function of a fundamental design parameter of a bandpass filter. An experimental filter was designed over 22 percend bandwidth centered at 9GHz and optimized using Super-Compact. Measured forward transmission and forward reflection closely matched design data but measured insertion loss was slightly higher (0.7dB) than the designed value.