• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.04a
• /
• pp.131-153
• /
• 1997

먹는물 생산용 역삼투법 해수담수화 시설의 도입에서 시설은 원수의 수질에 대하여 먹는물 수질기준을 충분히 달성할 수 있는 능력을 가져야 하고, 또한 시설의 배치, 유지관리 및 경제성을 고려한 최적공정이 선정되어야 한다. 역삼투법에 의한 먹는물 생산용 담수화시스템의 설비는 기본적으로 막의 성능을 안정적으로 유지하기 위한 전처리설비, 역삼투막모듈로 원수를 공급하기 위한 고압펌프 및 용존염의 제거하기 위한 역삼투막모듈 등의 세부분으로 구성되지만, 실용화 장치에서는 원수를 공급하기 위한 취수설비, 막으로 처리된 생산수를 먹는물로 급수하기 위한 후처리설비, 기타 세정설비 및 세정배수처리설비 등으로 구성된다.

• Korean Chemical Engineering Research
• /
• v.55 no.6
• /
• pp.762-766
• /
• 2017

Energy recovery device (ERD) is used to save energy consumption in seawater reverse osmosis processes. However, small-scale ERDs (<$100m^3/d$) are hardly observed in seawater desalination market. In South Korea, most of seawater desalination plants for drinking water production are small-scaled and have been operated in island areas or on ships. Thus, the effect of ERDs for these small-scale SWRO processes should not be neglected. In this work, the small-scale SWRO processes are designed and analyzed in terms of energy consumption with/without ERD. The realistic efficiencies of high pressure pumps are considered for the energy analyses. The unit cost of electricity depending on the application place (e.g., inland and island areas, on ships) is investigated to calculate the energy cost for unit water production in various SWRO applications classified by plant capacity, application place, and the installation of ERD. As a result, the energy cost can be saved up to $1,640.4KRW/m^3$ when ERD is applied, and the saving effect increases at smaller plants on ships. In conclusion, the development of small-scale ERDs are necessary because small-scale SWRO processes are dominant in Korean seawater desalination market, and the electricity saving effect becomes higher at smaller-scaled system.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.1
• /
• pp.59-68
• /
• 2013

In the present study, sea water reverse osmosis desalination system was composed with an ultra-filtration membrane as a pre-treatment. Sea water was induced into the pre-treatment composed with an auto-screen filter and an ultra-filtration membrane. It was proved that the permeate of the pre-treatment was adequate for reverse osmosis desalination system by measuring the $SDI_{15}$ and the turbidity. Feed salinities was changed by mixing the brine and the permeate. Inlet salinities effected the performances of sea water reverse osmosis desalination system in a large amount such as the salt rejection, the recovery ratio, the pressure, the product salinity. Energy consumptions per the ton of the product were almost linearly increased with the inlet salinities.

• Journal of Korea Water Resources Association
• /
• v.33 no.S1
• /
• pp.855-860
• /
• 2000

• Proceedings of the Korea Water Resources Association Conference
• /
• 2000.05a
• /
• pp.855-860
• /
• 2000

• Journal of Korea Water Resources Association
• /
• v.49 no.5
• /
• pp.431-438
• /
• 2016

Large energy consumption is one of the main weaknesses of RO desalination. A new method is proposed to reduce the energy consumption of RO desalination which depends on the salinity of the feedwater. Low salinity feedwater can be obtained using groundwater wells which extracts both fresh groundwater and subsurface sea water. Subsurface feedwater is advantageous in overcoming other problems associated with surface seawater intakes. Salinities of groundwater depend on a number of factors. In this work a new simulation-optimization model is proposed to identify well locations and pumping rates with would provide the required design flow rate with the minimum salinity. When groundwater is developed in a coastal area, the saltwater wedge advances inland and may contaminate existing groundwater wells, which must be prevented. The model can protect existing wells while developing minimum salinity feedwater. Examples are provided to demonstrate the usage of the model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.243-243
• /
• 2020

본 연구는 장래 유입수질 변화로 해수담수화(Desalination) 역삼투압(Seawater Reverse Osmosis) 공정의 전력비 예측 모델을 개발하고 별도의 해수담수화 추가공정이 필요한지 검토하였다. 플랜트 시설은 한번 설치되면 오랜 기간 운영이 되고, 주요 공정의 시설물 변경이 어려우며, 특히 해수담수화 시설의 경우에는 생활용수 및 공업용수를 수요자에 상시 공급함으로서 중간에 추가 시설물을 증설하거나 변경하기가 쉽지 않다. 따라서 해수담수화 시설의 계획 초기부터 현재의 유입수질 및 장래의 수질 변화를 예측하여 해수담수화 공정을 계획하는 것이 필요하다. 금회 검토는 해수온도 및 염분도 변화를 고려하여 서해에 위치한 대산산업단지 해수담수화 시설의 해수담수화 공정 전력비를 예측하였고, 입력 자료(온도 및 염분도)는 국가해양환경정보통합시스템(MEIS, Marine Environment Information System) 22년 과거자료(1997~2018년)를 이용하였다. 개발된 모형에 적용하여, 해수담수화에 필요한 전력비의 변화를 예측할 수 있으며, 이를 바탕으로 해수담수화 시설물 공정계획을 검토할 수 있었다. 금회 연구에서는 장래 수질변화 예측모형의 결과를 기반으로 해수담수화 시설물 공정을 제시하였다는데 의의가 있다.

• Journal of Korea Water Resources Association
• /
• v.44 no.10
• /
• pp.809-817
• /
• 2011

We analyzed various cost components for approximately 40 small-scale island desalination plants operated by K-water. A significant factor affecting desalination cost was found, and we proposed a way to reduce desalination costs. All plants considered were reverse osmosis (RO) facilities. TDS concentrations of feed water varied from less than 1,000 mg/L (practically considered freshwater) to over 30,000 mg/L (nearly seawater). Analysis of desalination costs from 2005 to 2009 indicated that maintenance, labor, and energy were the three biggest components that accounted for 50.6%, 36.9% and 7.8%, respectively. It was well known that TDS of feed water directly affected energy needed for RO process. In this study we found that maintenance cost was also directly related to feed water TDS. This finding indicated that lowering feed water TDS might result in significant desalination cost reduction.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05b
• /
• pp.119-122
• /
• 2004

최근 들어 용수가격 상승과 갈수기 대비 대체용수 확보차원에서 폐수를 처리하여 공업용수를 재이용하는 사례가 증가하고 있다. 국내의 경우 단위 사업장에서 폐수재이용 시설을 설치한 사례는 비교적 많은 편이나, 정상적으로 가동하는 경우는 드문 것으로 조사되고 있다[1]. 이는 초기 시설 투자비를 줄이기 위하여 전처리를 소홀히 한 것이 가장 큰 원인으로 판단된다.(중략)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.2027-2036
• /
• 2013

Comparison of removal performance between reverse osmosis(RO), nanofiltration(NF), electrocoagulation(EC) and electroadsorption(EA) for removal of nitrate and fluoride often exceeded the limits of water quality in small water treatment plants. Removals of nitrate and fluoride were 72-92% and 74-85% in RO, 5-15% and 1% in NF, 99% and 44% in EA equipped with MWCNT coated electrodes, 82% and 77% in EA equipped with Cu-MWCNT electrodes, and 11-46% and 69-99% in EC. Consequently, high removals of both ions were anticipated in RO. Effective removal of both ions are possible for EC, but great production of sludge is a big burden. EA equipped with the MWCNT electrodes showed a great fluctuation in removal efficiency, and electrode stability should be upgraded.