• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.10
• /
• pp.1-9
• /
• 1999

In this paper, a subblock partition scheme for reduction of computational complexity in partial transmit sequence which reduces the peak-to-average power ratio in orthogonal frequency division multiplexing (OFDM) is proposed. In this scheme, complex signals are assigned into partial subbands randomly and signals in a partial subband are duplicated and concatenated repetitively to make a subblock. By modulation of active subbands which have almost interleaved pattern, computational complexity can be reduced. As results of computer simulation, the proposed shows almost same peak to average power ratio reduction performance as compared to the conventional one. However, computational complexity required to transmit a partial transmit sequence OFDM symbol has been reduced extensively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.393-405
• /
• 2020

Various geotechnical information is required to evaluate the stability of the ground and a foundation once liquefaction occurs due to earthquakes, such as the soil strength and groundwater level. The results of the Standard Penetration Test (SPT) conducted in Korea are registered in the National Geotechnical Information Portal System. If geotechnical information for a non-drilled area is needed, geostatistics can be applied. This paper is about the feasibility of obtaining ground information by the Empirical Bayesian Kriging (EBK) method and the Inverse Distance Weighting Method (IDWM). Esri's ArcGIS Pro program was used to estimate these techniques. The soil strength parameter of the drilling area and the level of groundwater obtained from the standard penetration test were cross-validated with the results of the analysis technique. In addition, Multichannel Analysis of Surface Waves (MASW) was conducted to verify the techniques used in the analysis. The Buk-gu area of Pohang was divided into 1.0 km×1.0 km and 110 zones. The cross-validation for the SPT N value and groundwater level through EBK and IDWM showed that both techniques were suitable. MASW presented an approximate section area, making it difficult to clearly grasp the distribution pattern and groundwater level of the SPT N value.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.2 s.314
• /
• pp.46-54
• /
• 2007

In current printer industry, four or more colorants are added for color gamut extension because the gamut of printer is smaller than other devices. However, these additional colorants make a redundancy problem that several combinations of colorants reproduced same color stimulus in colorimetric inverse characterization process. Thus, we propose a method of colorimetric inverse characterization using color correlation between colorant's amount. First, for analyzing the combination of colorants which represent the same color stimulus, we estimate the color stimulus for all combination of colorants by Cellular Yule-Nielsen Spectral Neugebauer printer model. The combination of colorants which has higher color correlation factor comparing combinations of colorant around itself in color space is selected. It can reduced the color difference from the tetrahedral interpolation process which is estimation of the output value(colorants combination) for arbitrary input(color stimulus). The selected combinations of colorants and their color stimulus are stored to the lookup table. In experiment, the CMYKGO printer was used. As a result, the dark region of color gamut was extended and the color tone was more naturally represented.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.5 s.305
• /
• pp.95-102
• /
• 2005

When images compressed with block-based compression techniques are transmitted over a noisy channel, unexpected block losses occur. In this paper, we present a post-processing-based block recovery scheme using Haar wavelet features. No consideration of the edge-direction, when recover the lost blocks, can cause block-blurring effects. The proposed directional recovery method in this paper is effective for the strong edge because exploit the varying neighboring blocks adaptively according to the edges and the directional information in the image. First, the adaptive selection of neighbor blocks is performed based on the energy of wavelet subbands (EWS) and difference of DC values (DDC). The lost blocks are recovered by the linear interpolation in the spatial domain using selected blocks. The method using only EWS performs well for horizontal and vertical edges, but not as well for diagonal edges. Conversely, only using DDC performs well diagonal edges with the exception of line- or roof-type edge profiles. Therefore, we combined EWS and DDC for better results. The proposed methods out performed the previous methods using fixed blocks.

• Journal of Broadcast Engineering
• /
• v.21 no.1
• /
• pp.66-75
• /
• 2016

In this paper, we present a new method to reduce crosstalk of a glasses-free three-dimensional (3D) display using a multi-view image processing technique. Since crosstalk makes the current view image mixed with its neighboring ones, the output 3D image becomes severely blurred. We apply adaptive depth retargeting and view gradient-based crosstalk inverse filtering onto a multi-view image to minimize crosstalk of the glasses-free 3D display. In addition, overflow and underflow pixels are compensated by epipolar image pixel interpolation so that visual artifacts are minimized. Experimental results show that the proposed method reduces crosstalk more efficiently than the previous work while improving 3D image quality.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.69-75
• /
• 2016

In this paper, we propose a inverse synthetic aperture radar(ISAR) rotational motion compensation(RMC) method to remove residual blurring caused by non-uniform rotational motion of a target. First, a range bin having an isolated scatterer is selected. Next, polynomial phase signal in the selected range bin is estimated by using both Fourier transform(FT) and polynomial-phase transform(PPT). Finally, a new slow time variable that uniformly samples radar signal along the aspect angle directions is defined by using the estimated phase signal, and we interpolate radar signal in terms of the new time variable. As a result, rotational motion to blurr ISAR images is removed, and focused ISAR images are obtained. Simulation results using battleship model validate the robustness and effectiveness of our proposed RMC method.

• Journal of Korea Water Resources Association
• /
• v.48 no.5
• /
• pp.357-365
• /
• 2015

Both exponents of distance and elevation into distance-and-elevation ratio method for estimating missing rainfall data are expressed as squares together but in this study the two exponents are differently separated and analyzed. We used 326 hourly rainfall events of precipitation data during 10 years of 2004 to 2013 observed at a base station of Pyeongchang and the five neighboring index stations-Bangrim, Suju, Cheongoksan, Jinbu, Yeongwol1-in Han River basin for a case study. As a result, exponent values of distance and elevation appropriate for a topography of the site appear as 3.7 and 0.57 respectively. The exponents of distance and elevation difference need to be applied according to topographical characteristics of site where estimating missing data or interpolation are required.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.8
• /
• pp.670-677
• /
• 2017

In this paper, we propose a rotational motion compensation(RMC) for bistatic inverse synthetic aperture radar(Bi-ISAR) imaging. For this purpose, geometry-error, caused by changes of bistatic-angle, is removed using known position information of a transmitter, a receiver, and target trajectories. Next, RMC is performed to compensate non-uniform rotational motion error by reformatting radar signal in terms of a newly defined slow time variable that converts non-uniform rotational motion into uniform one. Simulation results using an aircraft model composed of ideal point scatterers validate the efficacy of the proposed Bi-ISAR RMC method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.584-584
• /
• 2015

최근 기후변화로 인한 국지성 집중호우와 태풍 등으로 홍수피해가 급증하고 있음에 따라 침수지역에 대한 공간적인 분석과 사전 예측으로 피해를 최소화하려는 노력이 필요하다. 따라서 본 연구에서는 소유역 별 평균화된 매개변수로 홍수량을 산정하는 집중형 모형이 아닌 분포형 모형을 적용하여 남강댐 유역의 유출량 산정 및 침수예측을 분석하였다. 분포형 모형은 격자체계를 기반으로 유역에 각 격자별 공간적 특성이 반영된 매개변수를 적용하므로 유역의 특성을 효과적으로 반영하므로 집중형 모형보다 정확한 해석이 가능하다. DEM, 토양도, 토지피복도 등의 격자크기 $240{\times}240$의 지형공간 자료를 ArcGIS를 이용하여 남강댐유역의 Flow direction, 경사도, 하도경사, 불투수율, 유효공극률, 조도계수, 토양심도, 수리전도도, 토양흡인수두 등의 수문매개변수를 추출하였다. 강우 자료의 경우 티센(Thiessen)법에 의해 선정된 남강댐유역 주변의 장수, 거창, 진주, 합천, 산청, 남원 강우관측소의 100년빈도 확률강우량 산정하여 24시간 확률강우를 3분위 Huff 분포시킨 후 강우의 공간적 통계특성을 반영하는 크리깅(Kriging)기법으로 적용하여 강우보간을 실시하였다. 침수예측을 위해 $Vflo^{TM}$모형을 이용해 48시간의 강우모의시간 홍수수문곡선 유도 및 홍수량 산정하였으며, 시간에 따른 침수 시뮬레이션하여 침수예측도를 작성하였다. 작성 시 침수심의 정도에 따라 5개의 구간으로 분류해 침수위험지역을 확인 할 수 있도록 도식화하였다. 본 연구에서는 남강댐유역의 침수위험지역을 개략적으로 예측할 수 있었으며, 추후 연구에서는 보다 조밀한 격자크기와 강우를 이용하여 분석한다면 향후 피난 정보 제공과 홍수재해지도 작성, 홍수방지 시설물 건설 또는 홍수보험계획 등에 응용이 될 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.375-375
• /
• 2023

본 연구는 농지를 대상으로 토양수분 및 가뭄 현황을 분석하는 데 그 목적이 있다. 토양수분을 파악하기 위해 Terra MODIS(Moderate Resolution Imaging Spectroradiometer) 위성영상기반의 토양수분 산정모형을 개발하였다. 해당 모형은 MODIS LST(Land Surface Temperature) 및 NDVI(Normalized Difference Deficit Index)를 기반으로 SCS-CN(Soil Conservation Service-Curve Number) 방법에서 착안한 수문학적 개념 5일 선행강우 및 무강우일수를 입력자료로 하며, 토양 종류 및 계절에 따른 토양수분의 특성을 고려하였다. 모형의 개발을 위해 MODIS LST 및 NDVI 영상을 2013년부터 2022년까지 각각 일별 및 16일 단위로 구축하였으며, 동 기간에 대해 전국 88개소의 기상청 종관기상관측소의 강수량 및 LST 자료를 수집하였다. MODIS LST는 실측 LST 자료를 활용해 조건부합성기법을 적용하여 상세화하였고, 수집된 강수량자료는 역거리가중법을 활용해 공간 보간을 수행하였다. 토양특성의 구분은 농촌진흥청에서 정밀토양도를 수집하여 활용하였다. 공간 분포된 토양수분에서 농지에 해당하는 토양수분을 추출하기 위해 스마트팜맵을 구축하고, 농지 속성에 해당하는 위치 정보를 조회 후 이를 시군구별로 평균하여 일별 평균 토양수분값을 산정하였다. 토양수분 기반의 가뭄 현황 분석을 위해 구축된 정밀토양도에서 작물 생장과 관련된 영구위조점 및 포장용수량을 활용해 5단계(정상, 관심, 주의, 경계, 심각)의 가뭄 위험도를 산정하였으며, 실제 가뭄 현황과의 비교를 통해 토양수분기반의 가뭄 위험도의 실효성을 검증하고자 한다.