• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권6호
• /
• pp.380-386
• /
• 2000

This paper presents the mathematical modelling analysis of Brushless Synchronous Motor(BLSM). The dynamic and the steady state characteristics of BLSM are simulated and analyzed : electromagnetic torque, speed, line voltage, and current. We used mathematical modelling to model of BLSM with sinusoidal back EMF, namely the shaft transformation referencing rotor frame from a, b, c three to produce constant torque like synchronous motor. The experiment result has already similar to compare with simulation result : torque error about 7%, speed error about 5%. The validity of proposed modelling and analysis was confirmed by the experimental result.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.407-409
• /
• 2006

우주발사체I 상단 시스템은 비행 중에 킥 모터 점화, 위성분리와 같은 HBW 점화기 기폭이 순차적으로 발생 한다. HBW 점화기의 기폭시에는 일반적으로 전도성 구조물을 통한 단락전류가 일시적으로 발생한다. 이러한 단락전류는 구동 전원 측으로 최대 전류 값 및 루프 면적에 비례한 일시적인 자기장을 형성시키고 near 필드(${\lambda}/2{\pi}$) 내의 인접하게 위치한 하니스에 자계 결합을 통한 역기전력 발생의 원인이 될 수 있다. 이러한 인접 하니스에 자계 노이즈 결합은 여러 자료를 통해 우주시스템 환경에서 일시적인 데이터 손실의 원인이 되는 것으로 분석되고 있다. 본 논문은 우주발사체의 HBW 점화기 기폭시 발생되는 전도성 구조물 단락전류 귀환현상으로 인한 자계노이즈 분석 및 감쇄방안에 대해 논의하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.75-78
• /
• 1989

In this paper, A last time delay damper is presented for HB ( HyBrid ) step motor, which has large oscillation characteristics.The design objective is to develop a cost-effective and good-performance damper that would be applyed to HB step motor / driver system without the addition of transducer that would add a weight, size and cost to the system. The Back EMF signal which is recovered from current and voltage signal is used for the measuring the rotor position. It would be possible to get more accurate delay time for the motor driver system. It is proved that the maximum overshoot can be reduced to 13% at stopping through experiment.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권12호
• /
• pp.709-717
• /
• 2004

Flux-reversal machine (FRM) is a new brushless doubly salient permanent magnet machine. Its operation is similar to that of the brushless DC motor, so it can be driven by 120 degree square wave voltage and use PWM pulse patterns in two-phase feeding scheme to control the speed. In this driving method, the back electromotive force (BEMF) current in the open phase is generated by the BEMF. It can be appeared or disappeared according to the changes of the neutral voltage of the machine. In this paper, the time-stepped voltage source finite-element method taking BEMF current into account is proposed. Its influences on the performances of the FRM are also investigated. To prove the propriety of the proposed analysis method, a Digital Signal Processor (DSP) installed experimental devices are equipped and the experiment is performed.

• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1182-1186
• /
• 2019

본 논문은 ADC 컨버터 내장 단상 직입구동 20W BLDC 모터 개발 및 출력 특성에 대한 연구결과를 논하였다. PWM 인버터 스위칭을 통해 회전자를 구동시키고, 모터의 역기전력을 홀센서 위상각 신호보다 전기적으로 30° 앞서도록 위치시켜 최적의 스위칭 타임을 확보하도록 제작하였다. 특성평가의 주요한 결과로서 인버터 효율 최대 92[%], 시스템 효율 53.34[%]를 보였으며, 모터 효율은 57.85[%] 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.706-710
• /
• 1988

Using back electro-motive force(EMF) signals of a brushless DC motor, the sensorless micro-processor controlled drive system was developed. In this new commutation method, the manual pulses are used for relatively short accelerating phase and then the exact commutational positions are detected based upon the back emf signals. The hardware and software implementations with the experiment to compare the performance of the developed system with the, conventional system using hall effect sensors are included. By reducing the number of the required sensors in the artificial heart control system, the total reliability will be incresed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.730-735
• /
• 2004

Nowadays, most small form-factor drives adapt a load/unload mechanism and the flying height of the head becomes more and more low. So, the load/unload velocity also becomes one of the important factors to ensure the reliability of the load/unload operation. To control the load/unload velocity accurately, velocity sensing is most important because there is no special velocity sensor during the load/unload operation. In this paper, we proposed a very practical method that measures the velocity from the BEMF voltage of a VCM. Then, the proposed method is applied to the load/unload velocity control using 2.5' drives in order to verify its usefulness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.10-12
• /
• 1997

For a given brushless DC linear motor, we analyze the thrust characteristics. We measure the back-EMF and then calculate the thrust with it. To compare the thrust, we measure it direct with force-torque meter and we calculate it from Lorentz equation. As the thrust and the back-EMF vary linearly according to the current and the velocity respectively, we define the thrust constant and the back-EMF constant. To match the motor to its controller, we calculate the thrust constant and the back-EMF constant. The result calculated with the back-EMF differs from that of the measurement by only 4.4%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.754-755
• /
• 2008

This paper presents a method for reducing the Total Harmonic Distortion(THD) of line-line back_EMF of the IPMSM with distributed winding under the no-load condition. Firstly, the specific harmonic components of line-line back EMF are reduced considering with winding factor. Secondly, THD of line-line back EMF is minimized according to change of pole angle using by Space harmonic Analysis. Finally, the optimal design for minimizing the THD is conducted using response surface methodology with finite element analysis. The validity of the design method dealt with in this paper is demonstrated by comparison between the THD of optimal model and initial model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.970-971
• /
• 2008

본 논문은 하이브리드 전기자동차를 위한 에어컨 압축기용 구동 드라이브에 대해 연구하였다. 전기자동차의 경우 열악한 환경에서 구동되기 때문에 센서리스 타입은 필수적이며, 고효율화와 고집적화를 위해서 매입형 영구자석 전동기 IPMSM (Interior Permanent Magnet Synchronizing Motor)을 사용하였다. 본 논문에서 사용된 IPMSM은 비정현적인 역기전력과 입력전류를 가지기 때문에 기존 IPMSM의 센서리스 방식은 불가능하다. 이를 해결하기 위해 최소차원의 관측기를 구성하고 속도함수에 의한 가변차단주파수에 의한 강인한 필터회로를 이용한 새로운 제어 알고리즘을 제안하였다.