• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.576-579
• /
• 2002

This paper presents the jacobian analysis of new type Casing Oscillator using the inverse kinematics, and to search for it's singularities through the jacobian analysis. All parallel manipulator have some singularities in workspace or it's outside workspace. Singularities were cleared by many other study of parallel manipulator f3r that reason recent publication of device control. In this paper defined that singularities of new file of Casing Oscillator and, to show it's graph. Finally this paper will be used for a practical example for construction spot, aviation simulator, vehicles simulator, military equipment etc.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.89-95
• /
• 2013

This study investigates a parallel manipulator that can move over two parallel sliders and in which the end-effector of the manipulator can be adjusted arbitrarily. Through the direct and inverse kinematics of the manipulator, position equations are derived. These equations represent the relationship between the positions of the sliders and the position of the end-effector. The Jacobian matrices of the direct and inverse kinematics are obtained by these equations. By using the condition number defined from these matrices, the local performance index of the manipulator is proposed. By using the simulation results of the performance index, we find that the manipulator can smoothen movements in only one quadrant and that the distribution of the maximal performance index is affected by the ratio of the length of links and the orientation of the end-effector.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.203-211
• /
• 2013

This paper presents the implementation and control of two arms of an indoor service robot for floor tasks. The robot arms are designed to have 6 degrees-of-freedom (DOF), but actually built to have 5 DOF. Forward and inverse kinematics of two arms are analyzed and simulated to confirm the kinematic analysis. Two arms are actually controlled based on the inverse kinematics. The right and left arms are separately controlled to follow different trajectories in order to make sure the functionality of both arms. Experimental studies are conducted to confirm the kinematic analysis and proper operation of two arms.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.359-360
• /
• 2010

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.156-162
• /
• 2001

An effective and practical method is presented for solving the forward kinematics of a 6-DOF Stewart Platform, using neural network algorithm together with Newton-Raphson method. An approximated solution is obtained from trained neural network, then it is used as an initial estimate for Newton-Raphson method. A series of accurate solutions are calculated with reasonable speed for the entire workspace of the platform. The solution procedure can be used for driving a real-time simulation platform.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.255-258
• /
• 2001

This introduces a improved method of the forward kinematics analysis, which finds the 6DOF motions and velocities from the given six cylinder lengths in the Steward platform. The numerical method(Newton Raphson Mehotd)of the forward kinematics analysises has the disadvantage of the long calculated time. To overcome this, we propose the competitive method that determine a proper initial value. Through the competitive method, we can select a proper initial value so that the calculate time is reduced. therefore we can give the property of the real time process to the forward kinematics analysis. We show the result comparing between general Newton-Raphson method and proposed one. From the result we verify the performance of the proposed method.

• Journal of Aerospace System Engineering
• /
• v.14 no.1
• /
• pp.16-20
• /
• 2020

The fatigue happening during the road riding of the vehicle and for the moment the aircraft lands on the runway is closely related to the life cycle of the landing gear, the airframe, the vehicle's suspension, etc. The multiple loads acting on the wheel are longitudinal, lateral, vertical, and braking forces. To study the dynamic characteristics and fatigue stiffness of the vehicle, the dynamic fatigue simulator generally has been used to represent the real road vibration in the lab. It can save time and cost. In hardware, the critical factor in the hydraulic fatigue simulator structure is to decouple each axis and to endure several load vibration. In this paper, the inverse kinematic analysis method derives the magnitude of movement of the hydraulic servo actuator by the coupling after rendering the maximum movement displacement in the axial direction at the center of the dummy wheel. The result of the analysis is that the coupling between the axes is weak to reproduce the real road vibrations precisely.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1252-1264
• /
• 1988

Recently industrial robots together with positioners are often used to enhance the system performance for arc welding. In this paper, a redundancy control method is proposed to the robot-positioner system with seven degrees of freedom, where one kinematic modelling technique is employed. Also, manipulability in the given cutting plane of the workspace. An algorithm maximizing the manipulability is applied to the robot and the positioner and the simulation results are shown for the task following a linear path.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.61-62
• /
• 2013

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.557-560
• /
• 2000

The Purpose of this study is analysis of kinematic for a modified manipulator and experimental test to certify auto-balancing operation. The test is carried out as follows. First, we solve the inverse kinematics and then do a closed loop control. Second we confirm translation displacement and rotation angle of a manipulator.